|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14174-2012: Large caliber liquid nitrogen container
Status: Valid GB/T 14174: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14174-2012 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Large caliber liquid nitrogen container
| Valid |
GB/T 14174-2012
|
| GB 14174-1993 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Large calibre liquid nitrogen container
| Obsolete |
GB 14174-1993
|
PDF similar to GB/T 14174-2012
Basic data | Standard ID | GB/T 14174-2012 (GB/T14174-2012) | | Description (Translated English) | Large caliber liquid nitrogen container | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A82 | | Classification of International Standard | 55.120 | | Word Count Estimation | 13,158 | | Older Standard (superseded by this standard) | GB 14174-1993 | | Quoted Standard | GB 150.3; GB/T 191-2008; GB/T 3198-2010; GB/T 3280-2007; GB/T 4237-2007; GB/T 6388-1986; GB/T 13550-1992; GB/T 16958-2008; GB/T 18443.2; GB/T 18443.3; GB/T 18443.5; GB/T 18443.8; GB 24511; HG/T 2690-1995; SN/T 0273-2002 | | Regulation (derived from) | National Standards Bulletin No. 42 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the austenitic stainless steel large diameter liquid nitrogen containers (hereinafter referred to as the container) the terms and definitions, classification, technical requirements, test methods, inspection rules and signs, packag | GB/T 14174-2012: Large caliber liquid nitrogen container---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Large caliber liquid nitrogen container
ICS 55.120
A82
National Standards of People's Republic of China
Replacing GB 14174-1993
Large caliber liquid nitrogen containers
Issued on. 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is based on GB/T 1.1-2009 given rule drafting.
This standard replaces GB 14174-1993, compared with GB 14174-1993, there are the following changes.
--- Chapter 1, "Scope" increased scope shall not apply;
--- Increased Chapter 3, "Terms and definitions" and the foundation "large caliber liquid nitrogen containers main terminology" in the original Appendix A (Supplement)
Carried out on the appropriate additions, deletions and modifications;
--- Original Chapter 3, "product models, specifications" to Chapter 4, "category", and large caliber liquid nitrogen containers directly into mouth and two partial mouth
category;
--- Original 1 "Structure Representation" to be modified, and the words "straight mouth type container structure diagram";
--- Added Figure 2 "Partial opening type container structure diagram";
--- Original Chapter 4, "technical requirements" to Chapter 5, and increases the technical requirements of flatfish type products;
--- Increased by 5.1 "General requirements";
--- An increase of 5.2 "material and an outer member," added the insulation material and the welding material requirements;
--- Increased 5.3 "design";
--- Canceled a Table 1 for product diameter, height, empty weight requirements;
--- Table 1, the original product daily evaporation rate index appropriate changes, and adds static evaporation rate index flatfish type products;
--- Original table 2 to Table 4 "neck tube diameter tolerance" and cancel the provisions of the original table 2 in the plug body diameter;
--- On 5.4 "manufacturing" requirements, appropriate complementary;
Adjusted 6.1 --- "effective volume" methods of measurement;
--- An increase of 6.3 "sandwich vacuum degree" methods of measurement;
--- Clear 6.4 "sandwich vacuum leak rate" measurement method;
--- Canceled a 6.2 "unqualified category";
--- A "type test" instead of the original "periodic inspection";
--- On 8.2 "packaging" made the necessary additional provisions.
This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points.
This standard was drafted. Chengdu Golden Phoenix Liquid Nitrogen Container Co., Ltd., Shanghai Gas Industry Association, Shanghai Jiaotong University, Shenyang Xinguang hypothermia
Container Co., Ltd., Leshan East Asia Electrical and Mechanical Industry and Trade Company, China Special Equipment Inspection and Research Institute, Shanghai Huayi Equipment Engineering Co., Ltd., the National Low
Temperature container Quality Supervision and Inspection Center, Shanghai Institute of Special Equipment Inspection.
The main drafters of this standard. Li Zongji, security concept, in Tong, Luxue Sheng, Liu Yuanming, Wei-Ming Zhou, Chen Zhaohui, Weiyong Biao, Ya-Yu, Teng Junhua,
Chen Union.
This standard replaces the standards previously issued as follows.
--- GB 14174-1993.
Large caliber liquid nitrogen containers
1 Scope
1.1 standard austenitic stainless steel large caliber liquid nitrogen containers (hereinafter referred to as the container) terms and definitions, classifications, technical requirements, test
Test methods, inspection rules and signs, packaging, storage and transportation requirements.
1.2 This standard applies to the storage of liquid nitrogen at atmospheric pressure, the effective volume of not more than 1830L, with a caliber of 315mm high vacuum multi-layer of absolute
Thermal containers.
1.3 This standard does not apply to use of containers.
--- With pressure storage of liquid nitrogen;
--- Other cryogenic liquid storage and liquid oxygen.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150.3 pressure vessels - Part 3. Design
GB/T 191-2008 Packaging - Pictorial signs
GB/T 3198-2010 aluminum and aluminum foil
GB/T 3280-2007 cold-rolled stainless steel sheet and strip
GB/T 4237-2007 hot-rolled stainless steel sheet and strip
GB/T 6388-1986 transport package shipping mark
GB/T 13550-1992 5A molecular sieve and test methods
GB/T 16958-2008 biaxially oriented polyester film for packaging
GB/T 18443.2 vacuum insulation cryogenic device performance test methods - Part 2. Vacuum Measurement
GB/T 18443.3 vacuum insulation cryogenic device performance test methods - Part 3. leak rate measurement
GB/T 18443.5 vacuum insulation cryogenic device performance test methods - Part 5. Static evaporation rate measurement
GB/T 18443.8 vacuum insulation cryogenic device performance test methods - Part 8. volume measurement
GB 24511 pressure equipment with stainless steel sheet and strip
HG/T 2690-1995 13X molecular sieves
SN/T 0273-2002 and export goods transport packaging wooden boxes for the inspection
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Mezzanine interspace
Confined space formed between the liner and the shell of the container.
3.2
High vacuum multi-layer insulation highvacuummulti-layerinsulation
Multilayer insulation layer disposed within the spatial separation of the insulating material heat radiation screen, and high vacuum pumping adiabatically formed.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14174-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 14174-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14174-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14174-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14174-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14174-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|