| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1406.2-2008 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Types and dimensions of lamp caps -- Part 2: Pin lamp caps
| Valid |
GB/T 1406.2-2008
|
PDF similar to GB/T 1406.2-2008
Basic data | Standard ID | GB/T 1406.2-2008 (GB/T1406.2-2008) | | Description (Translated English) | Types and dimensions of lamp caps -- Part 2: Pin lamp caps | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.10 | | Word Count Estimation | 114,135 | | Date of Issue | 2008-04-29 | | Date of Implementation | 2008-12-01 | | Older Standard (superseded by this standard) | GB 2799-2001 | | Quoted Standard | GB/T 1483.2, GB/T 10682, GB/T 19148.2, GB/T 21092, GB/T 21098 | | Adopted Standard | IEC 60061-1-2005, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the pin caps of the type and size. This section applies to those specified in this section use the lamp as a light model with accessories lighting product design and production, but also for other lighting product design. | GB/T 1406.2-2008: Types and dimensions of lamp caps -- Part 2: Pin lamp caps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Types and dimentions of lamp caps Part 2. Pin lamp caps
ICS 29.140.10
K74
National Standards of People's Republic of China
Replacing GB 2799-2001
Lamp type and size
Part 2. Pin lamp holder
(IEC 60061-1.2005, Lampcapsandholderstogetherwithgaugesforthe
controlofinterchangeabilityandsafety-Part 1. Lampcaps, MOD)
Posted 2008-04-29
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 1406 "cap type and size" is divided into five sections.
--- Part 1. screw-on cap;
--- Part 2. pin-type lamp;
--- Part 3. pre-focus lamp holder;
--- Part 4. Miscellaneous Lamp;
--- Part 5. bayonet cap.
This section GB/T 1406 Part 2.
2005 "lamp holders and the amount of test its safety and interchangeability. This section GB/T 1406 amendments adopted IEC 60061-1
- Part 1. Lamp "(version 3.35) in English.
This part of IEC 60061-1.2005 (3.35 version) English version of the section on the type and size of pin-type lamp in technical content
On exactly the same.
For ease of use, this section also made the following editorial changes.
"." --- With a decimal point instead of a comma as the decimal point, "";
--- "This International Standard" be replaced by "this section";
2 Normative references
The following documents contain provisions which, through reference to GB/T 1406 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1483.2 Lamp caps Gauges - Part 2. pin-type lamp holder gauge (GB/T 1483.2-2008,
IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeability
andsafety-Part 3. Gauges, MOD)
GB/T 10682 double-ended fluorescent lamps - Performance requirements (GB/T 10682-2002, neqIEC 60081.1997)
GB/T 19148.2 lampholder types and dimensions - Part 2. Pin lampholders (GB/T 19148.2-2008, IEC 60061-2.
2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-
Part 2. Lampholders, MOD)
GB/T 21092 Miscellaneous lamp (GB/T 21092-2007, IEC 61549.2005, IDT)
GB/T 21098 Lamp caps and test its safety and interchangeability of gauges - Part 4. Guidelines and general information
(GB/T 21098-2007, IEC 60061-4.2004, IDT)
3 type and size
Lamp models shall comply with GB/T 21098 of.
|