HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 14048.20-2013 English PDF

US$354.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14048.20-2013: Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements -- Three-position enabling switches
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 14048.20-2013English354 Add to Cart 3 days [Need to translate] Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements -- Three-position enabling switches Valid GB/T 14048.20-2013

PDF similar to GB/T 14048.20-2013


Standard similar to GB/T 14048.20-2013

GB/T 14048.4   GB 14536.11   GB 14536.15   GB/Z 14048.24   GB/T 14048.11   GB/T 14048.23   

Basic data

Standard ID GB/T 14048.20-2013 (GB/T14048.20-2013)
Description (Translated English) Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements -- Three-position enabling switches
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K32
Classification of International Standard 29.130.20
Word Count Estimation 18,179
Quoted Standard GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.10-2008; GB/T 2423.5-1995; GB/T 5226.1-2008; IEC 60947-1-2011; IEC 60947-5-1-2003
Adopted Standard IEC 60947-5-8-2006, IDT
Regulation (derived from) National Standards Bulletin No. 25 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the requirements for three enable switch. This standard applies to the use of a switch-enabled devices (see the provisions in 10. 9 GB 5226. 1-2008) components, providing a signal in the following cases: 1) when energized, allowing

GB/T 14048.20-2013: Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements -- Three-position enabling switches


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Low-voltage switchgear and controlgear Part 5-8.. Control circuit devices and switching elements Three-position enabling switches. ICS 29.130.20 K32 National Standards of People's Republic of China Low-voltage switchgear and control equipment Part 5-8. Control circuit devices and switching elements Three enable switch Low-voltageswitchgearandcontrolgear-Part 5-8. Controlcircuitdevicesand (IEC 60947-5-8.2006, IDT) Issued on. 2013-12-17 2014-04-09 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB 14048 "Low-voltage switchgear and control equipment" is currently divided into 21 sections. --- GB 14048.1 low-voltage switchgear and control equipment Part 1. General; --- GB 14048.2 low-voltage switchgear and control equipment Part 2. Circuit Breaker; --- GB 14048.3 low-voltage switchgear and control equipment - Part 3. Switches, disconnectors, switch and fuse combination Appliances; --- GB 14048.4 low-voltage switchgear and control equipment - Part 4-1. Contactors and motor starters - Electromechanical contactors And motor starters; --- GB 14048.5 low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical control Electrical circuit; --- GB 14048.6 low-voltage switchgear and control equipment Part 4-2. Contactors and motor starters - AC semiconductor Motor controllers and starters (including soft starter); --- GB/T 14048.7 low-voltage switchgear and control equipment Part 7-1. Ancillary copper conductor terminal blocks; --- GB/T 14048.8 low-voltage switchgear and control equipment Part 7-2. Protection of the auxiliary conductor wiring copper conductors Terminal block; --- GB 14048.9 low-voltage switchgear and control equipment Part 6-2. Multiple function equipment (equipment) control and protection switch Electric (equipment) (CPS); --- GB/T 14048.10 voltage switchgear and control equipment Part 5-2. Control circuit devices and switching elements proximity switch; --- GB/T 14048.11 voltage switchgear and control equipment Part 6-1. Multiple function equipment - Transfer switching equipment; --- GB/T 14048.12 voltage switchgear and control equipment Part 4-3. Contactors and motor starters - Non-Motor Load AC semiconductor controllers and contactors; --- GB/T 14048.13 voltage switchgear and control equipment Part 5-3. Control circuit devices and switching elements - Fault Proximity Switch (PDF) to determine the conditions required to have the function; --- GB/T 14048.14 voltage switchgear and control equipment Part 5-5. Control circuit devices and switching elements - with a machine Mechanical latching function electrical emergency braking device; --- GB/T 14048.15 voltage switchgear and control equipment Part 5-6. Control circuit devices and switching elements - proximity Biography Sensors and switching amplifiers DC Interface (NAMUR); --- GB/T 14048.16 voltage switchgear and control equipment - Part 8. rotary motor control with built - in thermal protection (PTC) Unit; --- GB/T 14048.17 voltage switchgear and control equipment Part 5-4. Control circuit devices and switching elements of small capacity The method of evaluating the performance of special test contacts; --- GB/T 14048.18 voltage switchgear and control equipment Part 7-3. Ancillary safety fuse terminal blocks Wide requirements; --- GB/T 14048.19 voltage switchgear and control equipment Part 5-7. Control circuit devices and switching elements for band Analog output proximity equipment requirements; --- GB/T 14048.20 voltage switchgear and control equipment Part 5-8. Control circuit devices and switching elements make three You can switch; --- GB/T 14048.21 voltage switchgear and control equipment Part 5-9. Control circuit devices and switching elements flow switch. This section GB 14048 "Low-voltage switchgear and control equipment" in Section 20. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with IEC 60947-5-8.2007 "low-voltage switchgear and control equipment Part 5-8. control circuit Three-way devices and switching elements enable switch. " This part made the following editorial changes. --- Remove the IEC foreword; --- Chapter 2 by deleting the definition of the alphabetical index. Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB 14048.1-2012 Low-voltage switchgear and control equipment Part 1. General (IEC 60947-1.2011, MOD); --- GB 14048.5-2008 Low-voltage switchgear and control equipment - Part 5-1. Control circuit devices and switching elements Machine Electrical control circuit devices (IEC 60947-5-1.2003, MOD). This part is proposed by the China Electrical Equipment Industrial Association. The low-voltage electrical part by the National Standardization Technical Committee (SAC/TC189) centralized. This section is responsible for drafting unit. Shanghai Electric Apparatus Research Institute, Shanghai Electric Technology Co., Ltd. Electric Division. Participated in the drafting of this section. Yuyao Goodwin Electronics Co., Ltd. JU Bang Electric Co., Ltd., Chang An Group Co., Ltd., Shanghai Detecting electrical equipment. The main drafters of this section. Huang Jing Ye, Wu Qingyun. The drafters of some of the participants. Can money plus wave officer Yong, Zhu Minglong, Zhengkai Yu. Low-voltage switchgear and control equipment Part 5-8. Control circuit devices and switching elements Three enable switch

1 Basic Requirements

1.1 Scope and purpose This section provides three enable switch requirements. This section applies to the switch as an enabling device (see 10.9 GB 5226.1-2008 provisions) components used in the following cases Provide signals. 1) is energized, allowing the mechanical operation initiated by a separate start control, and 2) de-energized when. a) initiation stop function, and b) to prevent mechanical operation. Note 1. The control function is enabled in GB 5226.1-2008 is described in 9.2.6.3. Note 2. This section does not involve enabled device. This section does not apply to. --- Three for non-electrical control circuit enabling switch, for example, hydraulic, pneumatic; --- Not so with three mechanical devices can switch; --- Emergency brake (see GB/T 14048.14). 1.2 Normative references The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2- 1.2007, IDT) GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2- 2.2007, IDT) GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT) GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (IEC 60068-2-27. 1987, IDT) GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005, IDT) IEC 60947-1.2011 Low-voltage switchgear and control equipment Part 1. General (Low-voltageswitchgearand controlgear-Part 1. Generalrules) IEC 60947-5-1.2003 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14048.20-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14048.20-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14048.20-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14048.20-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.