|
US$234.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13572-2008: Woodworking machines -- Planing-machines for two-, three-, or four-side dressing -- Nomenclature and acceptance conditions
Status: Valid GB/T 13572: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13572-2008 | English | 234 |
Add to Cart
|
3 days [Need to translate]
|
Woodworking machines -- Planing-machines for two-, three-, or four-side dressing -- Nomenclature and acceptance conditions
| Valid |
GB/T 13572-2008
|
| GB/T 13572-1992 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Woodworking machines--planing machines for two, three or four-side dresing--Accuracy test
| Obsolete |
GB/T 13572-1992
|
PDF similar to GB/T 13572-2008
Basic data | Standard ID | GB/T 13572-2008 (GB/T13572-2008) | | Description (Translated English) | Woodworking machines -- Planing-machines for two-, three-, or four-side dressing -- Nomenclature and acceptance conditions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J65 | | Classification of International Standard | 79.120.10 | | Word Count Estimation | 12,151 | | Date of Issue | 2008-08-11 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 13572-1992 | | Quoted Standard | GB/T 17421.1-1998; ISO 7984-1988 | | Adopted Standard | ISO 7569-1986, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the two, three, term four woodworking planer (hereinafter referred to as the machine) of each part. While referring to GB/T 17421. 1-1998, provides for inspection of geometric precision machine tools, and given the appropriate tolerances for general purposes, ordinary precision machine tools. This standard specifies only the geometric accuracy test machine, not for running test machine (such as vibration, unusual noise, reptiles and other test components), does not apply to machine characteristics test (such as speed, feed rate, etc.) these tests are generally advised to geometric precision in front of the machine -test. This standard for precision machine work without mandatory testing, which should be between the user and the manufacturer prior agreements separately. | GB/T 13572-2008: Woodworking machines -- Planing-machines for two-, three-, or four-side dressing -- Nomenclature and acceptance conditions
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wookworking machines. Planing machines for two-, three-, or four-side dressing. Nomenclature and accetpance conditions
ICS 79.120.10
J65
National Standards of People's Republic of China
GB/T 13572-2008/ISO 7569. 1986
Replacing GB/T 13572-1992
Woodworking machines two, three, four planer
Nomenclature and
(ISO 7569. 1986, IDT)
Posted 2008-08-11
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 7569. 1986 "Woodworking machines two, three, four planer Nomenclature and acceptance conditions" (in English).
For ease of use, this standard made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Remove the French term and Appendix A;
--- Deleted international standards foreword;
--- Increasing the normative references of Lead;
--- To ISO 7569. 1986 references to other international standards, with the international standard has been adopted as the standard instead of the corresponding country.
This standard replaces GB/T 13572-1992 "two, three, four woodworking planer precision."
There Compared with GB/T 13572-1992 The following criteria differences.
--- Modify the standard name;
--- Increasing the term;
--- G3, G7, G8 geometric precision test items have been adjusted;
--- Remove the work of the accuracy.
The standard proposed by China Machinery Industry Federation.
This standard by the National Woodworking Machine and Tool Standardization Technical Committee (SAC/TC84) centralized.
This standard was drafted. Fujian Shaowu Zhen Machinery Manufacturing Co., Asian workers (Weihai) Limited.
The main drafters of this standard. Yang Hua, Lin Jian Ping, Song Zhimin.
This standard replaces the standards previously issued as follows.
--- GB/T 13572-1992.
GB/T 13572-2008/ISO 7569. 1986
Woodworking machines two, three, four planer
Nomenclature and
1 Scope
This standard specifies two, three, four terms woodworking planer (hereinafter referred to as the machine) of each part, while referring to GB/T 17421.1-
1998, provides geometric precision machine testing, and given the appropriate tolerances for general use, general precision machine tools.
This standard specifies only the geometric accuracy of machine tool inspection, does not apply to running test machine (such as vibration, unusual noise, crawling parts
Inspection, etc.), does not apply to machine features test (such as speed, feed rate, etc.), these tests are generally advised before testing the geometric accuracy of machine tools
get on.
The standard accuracy of machine tools for working without mandatory inspection, which should be between the user and the manufacturer prior agreement separately.
This standard applies to ISO 7984. 1988 and in 12.22,12.23 those tools within the meaning of 12.24.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines
(Eqv ISO 230-1.1996)
ISO 7984. 1988 Woodworking machines Woodworking machines and auxiliary equipment for woodworking technology classification
3 Short Description
3.1 standard in all dimensions and tolerances are in millimeters.
3.2 This standard should be used with reference to GB/T 17421.1-1998, especially the test installation, spindles and other moving parts of the machine before
Temperature, and test methods. Gage error should not exceed 1/3 of the tolerance of the subject project.
3.3 standard geometric accuracy test order is given by the machine tool assembly sequence, which is not limited by the order of the actual inspection time. In order to facilitate
Installation and testing of the seizure, inspection in any order.
The standard test given project may not always be necessary or itemized inspection 3.4 inspection tools.
3.5 Test Project selection is determined by the user, and in agreement with the manufacturer, clearly defined at the time of ordering the machine. Selected test
Projects are often of interest about the performance of your machine.
3.6 movement in the direction of the workpiece called longitudinal movement.
3.7 When determining the minimum conversion tolerance measurement range is different from the present standard measurement range, consider tolerance is 0.01mm
(See GB/T 17421.1-1998 in 2.3.1.1).
4 Terms
Tools - Terminology Figure 1 and Table 1.
GB/T 13572-2008/ISO 7569. 1986
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13572-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13572-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13572-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13572-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13572-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13572-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|