Path: Home > GB/T > Page726 > GB/T 13569-2025 Home > Standard_List > GB/T > Page726 > GB/T 13569-2025

GB/T 13569-2025 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13569-2025: Surface planing machines with cutterblock for woodworking - Vocabulary and accuracy

GB/T 13569: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 13569-2025	English	279	Add to Cart	3 days [Need to translate]	Surface planing machines with cutterblock for woodworking - Vocabulary and accuracy		GB/T 13569-2025
GB/T 13569-2008	English	154	Add to Cart	3 days [Need to translate]	Woodworking machines -- Surface planning-machines with cutter block for one-side dressing -- Nomenclature and acceptance conditions	Valid	GB/T 13569-2008
GB/T 13569-1992	English	239	Add to Cart	2 days [Need to translate]	Woodworking machines--Surface planing machines with cutterblock for one side dressing--Accuracy tests	Obsolete	GB/T 13569-1992

Basic data

Standard ID	GB/T 13569-2025 (GB/T13569-2025)
Description (Translated English)	Surface planing machines with cutterblock for woodworking - Vocabulary and accuracy
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J65
Classification of International Standard	79.120.10
Word Count Estimation	14,122
Date of Issue	2025-10-31
Date of Implementation	2026-05-01
Older Standard (superseded by this standard)	GB/T 13569-2008
Issuing agency(ies)	State Administration for Market Regulation and Standardization Administration of China

GB/T 13569-2025: Surface planing machines with cutterblock for woodworking - Vocabulary and accuracy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 79.120.10 CCSJ65 National Standards of the People's Republic of China Replaces GB/T 13569-2008 Woodworking planer terminology and precision Published on 2025-10-31 Implemented on May 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4 General Requirements 5.Geometric accuracy inspection 4 Index 7 Figure 1.Example of a woodworking planer. 3 Table 1 Geometric Accuracy Inspection 4

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document supersedes GB/T 13569-2008 "Terminology and Precision of Woodworking Machine Tools - Planers" and is consistent with GB/T 13569-2008. Aside from structural adjustments and editorial changes, the main technical changes are as follows. ---The normative references have been changed (see 4.2, 4.7 and Table 1; 3.2, 3.7 and Table 2 in the.2008 edition); ---The term "Terminology" has been changed to "Terms and Definitions," and the example diagram of the woodworking planer and related technical content have been revised (see Chapter 3,.2008). Chapter 4 of the.2008 edition); ---The phrase "Brief Description" has been changed to "General Requirements," and the relevant content descriptions have been revised (see Chapter 4, Chapter 3 of the.2008 edition); ---The inspection methods in the geometric accuracy inspection items have been changed (see Chapter 5, Chapter 5 of the.2008 edition). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee on Standardization of Woodworking Machine Tools and Cutting Tools (SAC/TC84). This document was drafted by. Fujian Provincial Academy of Mechanical Sciences, Nanjing Forestry University, Shandong Gongyou Machinery Co., Ltd., and Foshan Yongchen Xingzhi. Energy Equipment Co., Ltd., Foshan Shunde Xinma Woodworking Machinery Equipment Co., Ltd. The main drafters of this document are. Cheng Deming, Ding Jianwen, Song Zhimin, Zhu Zhaolong, Feng Junhan, and Ma Jiehua. This document was first published in.1992, revised for the first time in.2008, and this is the second revision. Woodworking planer terminology and precision

1 Scope

This document defines the terminology for woodworking planers and their main components, specifies geometric accuracy inspection and corresponding tolerances, and describes the relevant... The experimental method. This document applies to the precision inspection of general-purpose, ordinary-precision woodworking planers. This document is not applicable to operational testing of woodworking planers (such as inspections for vibration, abnormal noise, and component creep), nor is it applicable to machine... Test the characteristics of the bed (such as speed, feed rate, etc.).

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 17421.1-2023 General Rules for Machine Tool Inspection - Part 1.Geometric Accuracy of Machine Tools under No-Load or Quasi-Static Conditions

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 A woodworking planer primarily used for machining the reference surface of workpieces. Note 1.Hereinafter referred to as "machine tool". Note 2.The main components of the machine tool and their names are shown in Figure 1. 3.2 The transmission mechanism that raises and lowers the rear worktable. 3.3 Back workbench outfeedtable The worktable from which the workpiece is output after processing. 3.4 Fence Transversal Locking Device for Guide Plate A device for locking the guide plate at various positions during lateral movement. 3.5 Cutterblock rear guard Protective device for the non-working parts of the cutter shaft. 3.6 Cutterblockguard Protective device for the working part of the cutter shaft.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13569-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13569-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13569-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13569-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13569-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13569-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.