Powered by Google www.ChineseStandard.net Database: 189759 (26 May 2024)

JB/T 13910.1-2020 PDF in English

JB/T 13910.1-2020 (JB/T13910.1-2020, JBT 13910.1-2020, JBT13910.1-2020)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
JB/T 13910.1-2020English80 Add to Cart 0-9 seconds. Auto-delivery. Piler - Part 1: Types and basic parameter Valid

Standards related to: JB/T 13910.1-2020

JB/T 13910.1-2020: PDF in English (JBT 13910.1-2020)

JB/T 13910.1-2020
ICS 25.120.10
J 62
Piler - Part 1: Types and basic parameter
Issued by: Ministry of Industry and Information Technology of the People's
Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Terms and definitions ... 4
3 Types ... 4
4 Basic parameters ... 7
4.1 Main parameters ... 7
4.2 Parameters ... 7
JB/T 13910 Piler is divided into three parts:
-- Part 1: Types and basic parameter;
-- Part 2: Technical requirements;
-- Part 3: Accuracy.
This Part is Part 1 of JB/T 13910.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part was proposed by China Machinery Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee 220 on
Forging Machinery of Standardization Administration of China (SAC/TC 220).
Drafting organizations of this Part: Taian Hualu Metalforming Machine Tool Co., Ltd.,
Shandong Laien Optic-electronic Technology Co., Ltd., SHINITE Machinery Co., Ltd.,
Shenzhen AMAE Co. Ltd., Xiamen Ruideli Calibration Checking and Measuring
Technology Co., Ltd.
Chief drafting staffs of this Part: Wang Hui, Chang Xin, Chen Haitao, Sun Qiu, Li Bo,
Zhang Yongdong, Zhan Yongqing.
This Part is released for the first time.
Piler - Part 1: Types and basic parameter
1 Scope
This Part of JB/T 13910 specifies the types and basic parameters of the piler.
This Part applies to the piler on the uncoiling, leveling and shearing production line for
sheet metal; it also applies, as a reference, to other pilers.
2 Terms and definitions
The following terms and definitions are applicable to this document.
2.1 Piler
A facility used for neatly collecting the uncoiled, leveled and sheared sheets.
2.2 Supporting frame
A device that prevents scratches on the surface of the sheet during the stacking process.
2.3 Supporting platform
A device for placing sheets during sheet stacking.
2.4 Side pushing
A device that pushes the sheets in the side direction (the width direction of the sheets)
during the stacking process of the sheets.
2.5 Longitudinal pushing
A device that pushes the sheets in the longitudinal direction (the length direction of the
sheets) during the stacking process of the sheets.
3 Types
The types of pilers are mainly divided into the following seven categories; various types
of functions can be combined arbitrarily according to user requirements:
a) Supporting frame-free and supporting platform-fixed piler: without supporting
frame, side pushing for lateral moving, longitudinal pushing for longitudinal
moving, fixed supporting platform. The structure is shown in Figure 1.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.