|
US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13508-2011: Polyethylene blown containers
Status: Valid GB/T 13508: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13508-2011 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Polyethylene blown containers
| Valid |
GB/T 13508-2011
|
| GB/T 13508-1992 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Polyethylene blown containers
| Obsolete |
GB/T 13508-1992
|
| GB/T 13508.1-1992 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Sampling and analysis of atmospheric precipitation method General)
| Obsolete |
GB/T 13508.1-1992
|
PDF similar to GB/T 13508-2011
Basic data | Standard ID | GB/T 13508-2011 (GB/T13508-2011) | | Description (Translated English) | Polyethylene blown containers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A82 | | Classification of International Standard | 83.140 | | Word Count Estimation | 13,121 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-09-01 | | Older Standard (superseded by this standard) | GB/T 13508-1992 | | Quoted Standard | GB/T 2828.1-2003; GB/T 16288 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the structure of polyethylene blow molded container products, specifications, requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to polyethylene as the main raw material, the use of blow molding process has a capacity of 250L or less (including 250L) Filling temperature below 50��C, storage temperature below 40��C plastic bottles, cans, buckets (hereinafter referred to as the container). 250L more blow molded containers can refer to this standard. This standard does not apply to dangerous goods, food packaging containers. | GB/T 13508-2011: Polyethylene blown containers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyethylene blown containers
ICS 83.140
A82
National Standards of People's Republic of China
Replacing GB/T 13508-1992
Polyethylene blow molded containers
Issued on. 2011-12-30
2012-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard GB/T 1.1-2009 given rule drafting.
This standard replaces GB/T 13508-1992 "polyethylene blow barrels."
This standard compared with GB/T 13508-1992 main changes are as follows.
--- Standard name changed to "polyethylene blow molded containers";
--- Expand the capacity of the standard scope; clearly this standard does not apply to dangerous goods, food packaging containers;
--- Increasing the permeability of the mouth, the packaging container cover structure; the line level and multi-vessel container;
--- Increased provision handle container structure, shape, large and small diameter;
--- Increasing the capacity of the test method bias;
--- Modify the capacity of deviation, quality deviation, size deviation, symmetric parts and minimum wall thickness ratio, built-in resistance to fluid test requirements;
--- Modify the drop test;
--- Modify the decision rule and sampling programs;
--- Removed classification;
--- Remove Appendix A.
The standard proposed by China National Light Industry Council.
This standard by the National Plastics Standardization Technical Committee (SAC/TC48) centralized.
This standard was drafted. Foshan Nanhai Dongxing Plastic Can Co., Ltd., light industry Institute of Plastics Processing Applications, Nanhai District of Foshan City,
Standardization Research and Promotion Center.
The main drafters of this standard. Loewe since, Shaw collar, Lijie Tao, Pangqi Xiong, Liang Guangwei, Zhou Yu Qiang, Li Xian sword.
This standard replaces the standards previously issued as follows.
--- GB/T 13508-1992.
Polyethylene blow molded containers
1 Scope
This standard specifies the structure of the product, specifications, requirements, test methods, inspection rules polyethylene blow molded containers, signs, packaging, transport and
Storage.
This standard applies to polyethylene as the main raw material, the blow molding process a volume of 250L or less (including 250L) Filling use temperature
The following degrees 50 ℃, storage temperature below 40 ℃ plastic bottles, cans, drums (hereinafter referred to as the container). 250L above blow molded containers can refer to this
standard.
This standard does not apply to dangerous goods, food packaging containers.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
plan
GB/T 16288 plastic signs
3 Product Structure
3.1 caliber
Into open-ended and closed type two, into an opening diameter greater than 70mm formula, is not more than 70mm diameter injection of closed type. use
In containers containing liquid formula should be closed.
3.2 handle
Integral points, and the end-mounted hands-down. Outfitted. one blow molding; mounted. After blow molding in a fixed part of the assembly; hand-side
Type. blow molding for moving irregularities site.
3.3, cover
Into using threads or other structures.
3.4 Level Line
According to the demand and supply sides negotiate if there are line level and location.
3.5 multilayered container
Two-layer coextrusion blow molding process made (or more) of the container.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13508-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 13508-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13508-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13508-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13508-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13508-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|