|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13465.3-2014: Test method of impermeable graphite materials: Part 3: Compressive strength
Status: Valid GB/T 13465.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13465.3-2014 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Test method of impermeable graphite materials: Part 3: Compressive strength
| Valid |
GB/T 13465.3-2014
|
| GB/T 13465.3-2002 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method for compressive strength of impermeable graphite materials
| Obsolete |
GB/T 13465.3-2002
|
| GB/T 13465.3-1992 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method for compressive strength of impermeable graphite materials
| Obsolete |
GB/T 13465.3-1992
|
PDF similar to GB/T 13465.3-2014
Basic data | Standard ID | GB/T 13465.3-2014 (GB/T13465.3-2014) | | Description (Translated English) | Test method of impermeable graphite materials: Part 3: Compressive strength | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G94 | | Classification of International Standard | 71.120 | | Word Count Estimation | 5,530 | | Date of Issue | 9/3/2014 | | Date of Implementation | 3/1/2015 | | Older Standard (superseded by this standard) | GB/T 13465.3-2002 | | Quoted Standard | GB/T 13465.1 | | Regulation (derived from) | People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the test device for measuring the compressive strength of impermeable graphite materials when used, samples, test procedures and the results of the calculation method. This section applies to the compressive strength of impermeable | GB/T 13465.3-2014: Test method of impermeable graphite materials: Part 3: Compressive strength---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of impermeable graphite materials. Part 3. Compressive strength
ICS 71.120
G94
National Standards of People's Republic of China
Replacing GB/T 13465.3-2002
Impermeable graphite materials - Test methods
Part 3. Compressive strength
Part 3. Compressstrength
Issued on. 2014-09-03
2015-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13465 "impervious graphite material testing method" is divided into 10 parts.
--- Part 1. General Mechanical tests;
--- Part 2. flexural strength;
--- Part 3. Compressive strength;
--- Part 4. the impact strength;
--- Part 5. phenolic adhesive shrinkage;
--- Part 6. Hydraulic Blasting graphite tube;
--- Part 7. weight gain and fill porosity;
--- Part 8. Adhesive shear strength;
--- Part 9. Adhesive tensile strength;
--- Part 10. tensile strength.
This part of GB/T 13465 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 13465.3-2002 "impervious graphite material compressive strength test method", and GB/T 13465.3-2002
Compared to the main technical changes are as follows.
--- Increased impervious graphite bulk compression sample size (Φ25mm ± 0.1mm) × (25mm ± 0.1mm) of;
--- Preparation and loading speed test when the sample was revised.
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Non-metallic chemical equipment Standardization Technical Committee (SAC/TC162) centralized.
This section is drafted. Tianhua Institute of Chemical Machinery and Automation Ltd., Guangzhou City Special Pressure Equipment Inspection and Research Institute,
Nantong planet graphite Equipment Co., Ltd., Nantong Jingtong Graphite Equipment Co., Ltd. Shanghai Branch Graphite Products Co., Ltd. Pan.
The main drafters of this section. Zhou Jie, Li Maodong, Liu Xiaodong, Wang Yu Hang, the People of Chinese, Zhang Branch, Xin morning, Li-hua, Ye Weiwen.
This part of the standard replaces the previous editions are.
--- GB/T 13465.3-1992, GB/T 13465.3-2002.
Impermeable graphite materials - Test methods
Part 3. Compressive strength
1 Scope
This section GB/T 13465 specifies the test device when measuring the compressive strength of impermeable graphite material used, samples, test procedures and
Results calculated.
This section applies to impervious graphite material compressive strength measured.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 13465.1 impermeable graphite materials - Test methods - Part 1. General Mechanical tests
3 Terms and Definitions
GB/T 13465.1 defined and the following terms and definitions apply to this document.
3.1
Compressive strength compressivestrength
It can withstand the limit load value Found on impervious graphite material per unit area.
4 instruments and equipment
Instruments and equipment shall comply with the relevant provisions of GB/T 13465.1 of.
5 Sample
5.1 Sampling, sample preparation and processing method according to GB/T 13465.1 of the relevant provisions.
5.2 Sample size.
a) block material. (φ45mm ± 0.1mm) × (45mm ± 0.1mm) or (φ25mm ± 0.1mm) × (25mm ± 0.1mm);
b) graphite tube. diameter, wall thickness deviation according to product specifications and regulations, a height equal to the outer diameter of the tube;
c) an adhesive casting parts. (φ25mm ± 0.1mm) × (25mm ± 0.1mm).
5.3 Compression parallel to the surface of the sample bias ≤0.05mm.
5.4 specimen surface roughness Ra≤3.2μm.
5.5 each sample at least five.
6 Test procedure
6.1 material, adhesive cast member Measurement. measured along the axial direction of the sample 3, measured at each of mutually perpendicular diameters of the 1, take the resulting data 6
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13465.3-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13465.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13465.3-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13465.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13465.3-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13465.3-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|