HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 23711.2-2019 PDF English


Search result: GB/T 23711.2-2019 English: PDF (GB/T23711.2-2019)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 23711.2-2019English175 Add to Cart 0-9 seconds. Auto-delivery. Test method for pressure vessels lined with plastics -- Part 2: Low-temperature testing Valid
GB/T 23711.2-2009English319 Add to Cart 3 days Low temperature test method for pressure vessels lined with fluoroplastics Obsolete
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 23711.2-2019     Related standards: GB/T 23711.2-2019

PDF Preview: GB/T 23711.2-2019


GB/T 23711.2-2019: PDF in English (GBT 23711.2-2019)

GB/T 23711.2-2019 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.120;83.140 G 94 Replacing GB/T 23711.2-2009 Test method for pressure vessels lined with plastics - Part 2: Low-temperature testing ISSUED ON: DECEMBER 10, 2019 IMPLEMENTED ON: NOVEMBER 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3  1 Scope ... 6  2 Normative references ... 6  3 Principle ... 6  4 Test equipment ... 6  5 Sample ... 7  6 Test method ... 7  7 Test result judgment ... 9  8 Test report ... 10  Appendix A (Informative) Low-temperature test report ... 11  Foreword GB/T 23711, Test method for pressure vessels lined with plastics, is divided into 8 parts: -- Part 1: Spark testing; -- Part 2: Low-temperature testing; -- Part 3: High-temperature inspection; -- Part 4: Negative pressure inspection; -- Part 5: Cold-hot cycling inspection; -- Part 6: Anti pressure testing; -- Part 7: Leak testing; -- Part 8: High-resistance testing. This Part is the 2nd part of GB/T 23711. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 23711.2-2009, Low temperature test method for pressure vessels lined with fluoroplastics; compared with GB/T 23711.2-2009, the main technical changes, except editorial changes, are as follows: -- In the "Scope", add plastic lining materials such as rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), polyethylene (PE) (see Chapter 1); -- Modify contents of the normative references (see Chapter 2, Chapter 2 of version 2009); -- Add the principle (see Chapter 3); -- Add requirements for test chambers and tensile testing machines (see Chapter 4); -- Modify requirements for the sample (see Chapter 5, Chapter 4 of version 2009); -- Add requirements for labels and the like on the sample when there is anisotropy on the dimensions and materials of the sample (see 5.1 and 5.2, Chapter 4 of version 2009); Test method for pressure vessels lined with plastics - Part 2: Low-temperature testing 1 Scope This Part of GB/T 23711 specifies the principle, test equipment, sample, test method, test result judgment and test report of the low-temperature testing of steel pressure vessels lined with plastics. This Part applies to the low-temperature testing of steel pressure vessels lined with plastics such as rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), polyethylene (PE), ethylene-tetrafluoroethylene copolymer (ETFE), fluorinated ethylene propylene (FEP), perfluoroalkoxy alkanes (PFA), polytetrafluoroethylene (PTFE), and polyvinylidene difluoride (PVDF), whose container shell material is steel. 2 Normative references The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1040.2, Plastic. Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic GB/T 10592, Specification for low/high temperature test chambers JB/T 7797-2017, Tensile testing machines for rubber and plastics 3 Principle Cycle the sample at low temperature and room temperature; repeat for three cycles according to the prescribed time; perform tests of shape, dimensional change rate and mechanical property on the sample, so as to determine the low-temperature resistance of the steel pressure vessels lined with plastics. 4 Test equipment 4.1 Test chamber 7 Test result judgment 7.1 Shape 7.1.1 Use naked eye to observe the sample; if there is obvious deformation, cracking and the like, it is regarded as failure. If there are no such defects, the item is judged as qualified. 7.1.2 When the selected sample that passes the high-temperature testing is used as the sample for this test, if it is judged as qualified in 7.1.1, both the high-temperature testing and the low-temperature testing in the test temperature range are judged as qualified at the same time. 7.2 Size Measure the dimensions of the test piece that passes 3 low-temperature testing cycles in every direction at room temperature. Calculate the dimensional change rate of the sample according to Formula (1) and Formula (2). The numerical rounding interval of the test result is 0.01. Where: DL -- the dimensional change rate of the length of the test piece; L1 -- the length of the test piece after the test, in millimeters (mm); L0 -- the length of the test piece before the test, in millimeters (mm); DW -- the dimensional change rate of the width of the test piece; W1 -- the width of the test piece after the test, in millimeters (mm); W0 -- the width of the test piece before the test, in millimeters (mm); 7.3 Mechanical property The test results of tensile strength and elongation at break are determined according to the relevant standards. ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.