HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 13454.1-2013 English PDF

US$154.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13454.1-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications
Status: Valid

GB/T 13454.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 13454.1-2013English154 Add to Cart 3 days [Need to translate] Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications Valid GB/T 13454.1-2013
GB 13454-1992English199 Add to Cart 2 days [Need to translate] Plastics--Aminoplastic moulding materials--Specification Obsolete GB 13454-1992

PDF similar to GB/T 13454.1-2013


Standard similar to GB/T 13454.1-2013

GB/T 12008.7   GB/T 12598   GB/T 14486   GB/T 18964.1   GB/T 18964.2   GB/T 13454.2   

Basic data

Standard ID GB/T 13454.1-2013 (GB/T13454.1-2013)
Description (Translated English) Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G31
Classification of International Standard 83.080.10
Word Count Estimation 8,837
Quoted Standard GB/T 1043.1-2008; GB/T 1634.2-2004; GB/T 1844.1-2008; GB/T 1844.2-2008; GB/T 2035-2008; ISO 14528-2-1999; ISO 14528-3-1999
Adopted Standard ISO 14528-1-1999, IDT
Regulation (derived from) National Standards Bulletin No. 22 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the powdered melamine - formaldehyde molding compounds (MF-PMCs) named character set system. Various types of MF-PMCs according Fill/reinforcing material name and content, pre-processing methods, the special properties and special

GB/T 13454.1-2013: Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1.. Designation system and basis for specifications ICS 83.080.10 G31 National Standards of People's Republic of China Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) Part 1. Designation system and basis Plastics-Melamine-formaldehydepowdermouldingcompounds (MF-PMCs) - Part 1. Designationsystemandbasisforspecifications (ISO 14528-1.1999, IDT) Issued on. 2013-11-12 2014-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 13454 "plastic powdered melamine - formaldehyde molding compounds (MF-PMCs)" is divided into three parts. --- Part 1. Designation system and basis; --- Part 2. Sample preparation and performance measurement; --- Part 3. Selected plastic molding requirements. This section GB/T Part of 113,454. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 14528-1.1999 "Plastics powdered melamine - formaldehyde molding compounds (MF-PMCs) Part 1. Designation system and basis. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 13454.2-2013 plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 2. Sample Preparation And determination of properties (ISO 14528-2.1999, MOD) --- GB/T 13454.3-2013 plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 3. Selected molding Material requirements (ISO 14528-3.1999, MOD) This part of ISO 14528.1-1999 made editorial changes. --- Remove the ISO 14528.1-1999 1.6 content; --- Deleted the Chapter 2, "Normative references" in two footnotes. --- Remove the ISO 14528-1.1999 is not referenced in the ISO 800.1992 standards. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Technical Committee of Standardization Technical Committee plastic thermosetting plastics (SAC/TC15/SC11) centralized. This section is responsible for drafting unit. Fujian Shaxian Hongguang Chemical Co., Ltd., Changshu Southeast Plastic Co., Chenguang Chemical Research Design Institute Limited, Guangdongrongtai Industrial Co., Ltd., Shandong Billiton Bo Plastics Co., Ltd., the State Quality Supervision, Inspection synthetic resin Test center. The main drafters of this section. Chenyin Gui, Chen Jiwei, Liu Lirong, Wei Wei, Chen Dongyang, Peng Jianjun. Plastic powdered melamine - formaldehyde molding compounds (MF-PMCs) Part 1. Designation system and basis

1 Scope

1.1 GB/T 13454 in the provisions of this part of the powdered melamine - formaldehyde molding compounds (MF-PMCs) system named character set. 1.2 various types of filling in accordance with MF-PMCs/reinforcing material name and content, predetermined processing methods, special properties and are particularly useful for name The performance characteristics (specified performance) information classification. 1.3 section applies to all powdery, granular or powdered material MF-PMCs. 1.4 material with the same name does not necessarily have the same performance, this section does not provide engineering data, performance data, or some special purpose and / Or special molding method of molding conditions required data. If you need these additional properties should be ISO 14528-2.1999 tests prescribed The method of measurement. 1.5 When you need to express conform ISO 14528-3. a general-purpose data requirements listed in 1999, also need to use the character set of system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Determination of strength GB/T 1043.1-2008 Plastics Charpy impact - Part 1. Non-instrumented impact test (ISO 179-1. 2000, IDT) GB/T 1634.2-2004 Determination of plastic deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite materials Material (ISO 75-2.1993, IDT) GB/T 1844.1-2008 Plastics - Symbols and abbreviations - Part 1. Basic polymers and their special characteristics (ISO 1043-1. 1997, IDT) GB/T 1844.2-2008 Plastics - Symbols and abbreviations - Part 2. fillers and reinforcing materials (ISO 1043-2.2000, IDT) GB/T 2035-2008 Plastics terms and definitions (ISO 472.1999, IDT) ISO 14528-2.1999 Plastics powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 2. Preparation of test specimens Determination (Plastics-Melamine-formaldehyde powder moulding compounds (MF-PMCs) -Part 2. Preparationoftestspecimensanddeterminationofproperties) ISO 14528-3.1999 Plastics powdered melamine - formaldehyde molding compounds (MF-PMCs) - Part 3. molding compound to be selected Seek (Plastics-Melamine-formaldehyde powder moulding compounds (MF-PMCs) -Part 3. Requirementsforselectedmouldingcompounds)

3 Terms and Definitions

GB/T 2035-2008 and ISO 14528-2.1999 as defined in the following terms and definitions apply to this section. 3.1 Powder molding compounds powdermouldingcompound (PMC) Free flowing powder by mechanical machining feed system, granular or powdered plastic molding, also not normally considered to be powdered

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13454.1-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13454.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13454.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13454.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13454.1-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13454.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.