|
US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13288.4-2013: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13288.4-2013 | English | 214 |
Add to Cart
|
3 days [Need to translate]
|
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface
| Valid |
GB/T 13288.4-2013
|
PDF similar to GB/T 13288.4-2013
Basic data | Standard ID | GB/T 13288.4-2013 (GB/T13288.4-2013) | | Description (Translated English) | Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A29 | | Classification of International Standard | 25.220.10 | | Word Count Estimation | 11,166 | | Quoted Standard | ISO 3274; ISO 4287-1; ISO 4618; ISO 5436; ISO 8503-1; ISO 8503-2; ISO 8503-3; ISO 8504-2; ISO/TC 57 | | Adopted Standard | ISO 8503-4-1988, IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 10 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides for the GB/T 13288. 1 comparison calibration of surface roughness and surface roughness stylus assay sample block. GB/T 13288 in this section also applies to the cleanup after injection, the average difference between the peak measu | GB/T 13288.4-2013: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned substrates Part 4. Method for the calibration of ISO surface profile comparator and for the determination of surface pro
ICS 25.220.10
A29
National Standards of People's Republic of China
Before application of paints and surface treatment of steel
Surface roughness characteristics of blast-cleaned steel post
Part 4. ISO surface profile comparators block
Calibration and surface roughness measurement method stylus method
Part 4. MethodforthecalibrationofISO surfaceprofilecomparatorandforthe
(ISO 8503-4. 1988, IDT)
Issued on. 2013-12-01 2013-07-19 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13288 "steel substrates before application of paints and spray cleaned steel surface roughness characteristics" is divided into the following sections.
--- Part 1. Technical requirements and definitions used to assess post-blast cleaning of steel surface roughness ISO roughness comparison sample block;
--- Part 2. Determination after abrasive blast cleaning of steel surface roughness comparison specimens class method;
--- Part 3. Calibration and surface roughness measurement method ISO surface roughness comparison specimens microscope focusing method;
--- Part 4. ISO calibration of surface roughness and surface roughness comparison specimens measuring method stylus method;
--- Part 5. Determination of surface roughness Replica tape method.
This section GB/T Part of 413,288.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 8503-4. 1988 "before application of paints and surface treatment of steel blast cleaning of steel surface roughness
Roughness properties - Part 4. ISO calibration of surface roughness and surface roughness measurement method stylus Law "comparative sample block.
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 5206 (all parts) Glossary [ISO 4618 (all parts)]
--- GB/T 13288.1-2008 steel substrates before application of paints and steel surface roughness characteristics of blast - cleaned first
Part 1. Technical requirements for assessing post-blast cleaning of steel surface roughness of ISO surface profile comparators and definitions
(ISO 8503-1. 1988, IDT)
--- GB/T 13288.2-2011 steel surface blast cleaned steel substrates before application of paints roughness characteristics
Part 2. Part 2. Determination after abrasive blast cleaning of steel surface roughness comparison specimens grade method (ISO 8503-
2. 1988, IDT)
Spray steel surface treatment after cleaning --- GB/T 13288.3-2009 steel substrates before application of paints and roughness characteristics
Part 3. Calibration and surface roughness measurement method ISO surface roughness comparison specimens focus microscope method (ISO 8503-
3. 1988, IDT)
--- GB/T 18839.2-2002 steel substrates before application of paints and surface treatment method - Part 2. Abrasive blast - cleaning
(ISO 8504-2.2000, MOD)
This part is proposed by the China State Shipbuilding Corporation.
This part of the National Standardization Technical Committee before painting and metal surface treatment and painting processes Technical Committee paint pigment
(SAC/TC5/SC6) centralized.
This section is drafted. 11th Institute of China Shipbuilding Industry, Technical and Economic Research Institute of China Shipbuilding Industry, MCC Baosteel Technology
Services Limited.
The main drafters of this section. Fu Jianhua, Song Yanyuan, Jiang Feng, Tang Weiwei, Qi Xi, Yang Gang.
Before application of paints and surface treatment of steel
Surface roughness characteristics of blast-cleaned steel post
Part 4. ISO surface profile comparators block
Calibration and surface roughness measurement method stylus method
1 Scope
GB/T 13288 provisions of this part of the GB/T 13288.1 surface roughness comparators for calibration and surface roughness
Stylus assay.
This section GB/T 13288 also apply to clean up after injection, the average peak-valley difference in Ry5 = 20μm ~ 200μm range of flat steel
Determination of surface roughness or a copy. Measurements can be blast-cleaned surface area representative, if not measured directly on the surface,
Can be measured (see Appendix C) on the surface of the copy.
Note. If desired, can also be used to assess other substrate surface roughness by abrasive blast cleaning.
An alternative method, see ISO 8503-3.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 3274 with a surface roughness measurement instrument Roughness law conversion method contacts the contact roughness tester, the system M (Instruments
forthemeasurementofsurfaceroughnessbytheprofilemethod-Contacttransformation-Contact
profilemeters, systemM)
ISO 4287-1 Surface roughness - Terminology - Part 1. Surface and reagent preparation (Surfaceroughness-
Terminology-Part 1. Surfaceanditsparameters)
ISO 4618 paints and varnishes - Vocabulary (Paintsandvarnishes-Vocabulary)
Calibration Standard ISO 5436 standard stylus instrument types, calibration and use (Calibrationspecimens-Stylusinstru-
ments-Types, calibrationanduseofspecimens)
Steel surface roughness characteristics - Part 1 ISO 8503-1 coated front surface coating of steel blast - cleaning. abrasive jet
Requirements and definitions (Preparationofsteelsubstratesbeforeapplication clean up after the steel surface roughness comparison specimens of ISO
ofpaintsandrelatedproducts-Surfaceroughnesscharacteristicsofblast-cleanedsteelsubstrates-Part 1.
SpecificationsanddefinitionsforISO surfaceprofilecomparatorsfortheassessmentofabrasiveblast-
cleanedsurfaces)
Steel surface roughness characteristics - Part 2 ISO 8503-2 coated front surface coating of steel blast - cleaning. abrasive jet
After cleaning up the steel surface roughness rating - comparison specimens Act (Preparationofsteelsubstratesbeforeapplicationof
paintsandrelatedproducts-Surfaceroughnesscharacteristicsofblast-cleanedsteelsubstrates-Part
2. Methodforthegradingofsurfaceprofileofabrasiveblast-cleanedsteel-Comparatorprocedure)
Steel surface roughness characteristics - Part 3 ISO 8503-3 coated front surface coating of steel blast - cleaning. ISO surface
Calibration and surface roughness comparison specimens roughness measuring method microscope focusing method (Preparationofsteelsubstrates
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13288.4-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 13288.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13288.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13288.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|