HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 13288.2-2011 English PDF

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13288.2-2011: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 13288.2-2011English134 Add to Cart 3 days [Need to translate] Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure Valid GB/T 13288.2-2011

PDF similar to GB/T 13288.2-2011


Standard similar to GB/T 13288.2-2011

GB/T 13912   GB/T 11376   GB/T 13911   GB/T 13288.4   GB/T 13288.5   GB/T 13288.3   

Basic data

Standard ID GB/T 13288.2-2011 (GB/T13288.2-2011)
Description (Translated English) Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A29
Classification of International Standard 25.220.10
Word Count Estimation 7,741
Date of Issue 2011-12-30
Date of Implementation 2012-10-01
Older Standard (superseded by this standard) GB/T 13288-1991
Quoted Standard ISO 4618; ISO 8501-1; ISO 8503-1; ISO 8503-3; ISO 8503-4; ISO 8504-2
Adopted Standard ISO 8503-2-1988, IDT
Regulation (derived from) National Standard Approval Announcement 2011 No.23
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the level of visual and touch the surface roughness evaluation method. Steel surface with ISO 8504-2 requirements of any kind arising from abrasive blast cleaning can be assessed by the roughness of the provisions of this section. This method uses the ISO surface roughness comparison specimens, assessed at the scene before application of paints and abrasive blast cleaned steel surface roughness. This method is applicable by pellets or steel grit abrasive blast cleaned surfaces and spray to clean the entire exterior grade surface is measured in ISO 8501-1 Sa2 1/2 and Sa3 level. This method is suitable for cleanup by metal or non-metallic abrasive surface.

GB/T 13288.2-2011: Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 2. Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure ICS 25.220.10 A29 National Standards of People's Republic of China Replace GB/T 13288-1991 Surface treatment of steel before coating Surface roughness characteristics of steel after jet cleaning Part 2. abrasive spray after cleaning steel Comparison of surface roughness grades Surfaceroughness characteristicsofblast-cleansteelsubstrates- Part 2. Methodforthegradingofsurfaceprofileofabrasiveblast-cleanedsteel- (ISO 8503-2. 1988, IDT) 2011-12-30 release.2012-10-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

GB/T 13288 "Surface coating of steel before coating coating The surface roughness characteristics of steel after jet cleaning are divided into the following parts. - Part 1. Technical requirements for assessing ISO surface roughness comparison of sample surface roughness after jet cleaning definition; - Part 2. Determination of surface roughness grade of steel after abrasive jet cleaning - Comparison of sample method; - Part 3. ISO surface roughness comparison - Sample calibration and determination of surface roughness - Microscope focusing method; - Part 4. ISO surface roughness comparison - Sample calibration and determination of surface roughness - Method of stylus method; - Part 5. Determination of surface roughness - Copying method. This part is part 2 of GB/T 13288. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 13288-1991 "before the steel surface roughness grade assessment (comparison sample method)". This part with GB/T 13288-1991 compared to the main technical changes are as follows. --- modify the normative reference file to refer directly to the ISO standard; - Added chapters such as "terms and definitions", "principles", "instruments" (see Chapters 3, 4 and 5); - modified the "Test Report" chapter (see Chapter 8, Chapter 6 of.1991). This part uses the translation method equivalent to ISO 8503-2. 1988 "coating the surface of the steel before the steel surface of the sprayed steel surface Roughness characteristics - Part 2. Comparison method for the determination of surface roughness grade of steel after abrasive jet cleaning. In this part of the normative reference to the international documents have a consistent correspondence between the following documents. --- GB/T 5206 (all parts) Paint and varnish vocabulary [ISO 4618 (all parts)]; GB/T 8923.1-2011 Visual evaluation of surface cleanliness of steel surface before coating of coatings - Part 1. Uncoated Overcoat steel surface and the full removal of the original coating after the steel surface corrosion grade and treatment level (ISO 8501-1. 2007, IDT); GB/T 13288.1-2008 Surface treatment of steel before coating coating Surface roughness characteristics of steel after jet cleaning Part 1. Technical requirements and definitions for ISO surface roughness comparison samples for assessing surface roughness of steel after jet cleaning (ISO 8503-1. 1988, IDT); GB/T 13288.3-2009 Surface Treatment of Coatings before Coatings Surface roughness characteristics of steel after jet cleaning 3 parts. ISO surface roughness comparison sample block calibration and surface roughness measurement method Microscope focusing method (ISO 8503- 3. 1988, IDT); GB/T 18839.2-2002 Surface treatment of steel before coating coating Surface treatment method Abrasive jet cleaning (eqvISO 8504-2..2000). This part is made by China Shipbuilding Industry Corporation. This section is prepared by the National Coatings and Pigments Standardization Technical Committee (PAC / TC5/SC6). This part of the drafting unit. China Shipbuilding Industry Integrated Technology and Economic Research Institute, China Shipbuilding Industry Corporation, the Eleventh Institute, Shandong Zibo Daya Metal Technology Co., Ltd., Shandong Kai Tai Group Co., Ltd., Guangzhou China Ship Huangpu Shipbuilding Co., Ltd., Zhejiang Jialong Anticorrosion Engineering Co., Ltd., Guangzhou in the ship Longxue Shipbuilding Co., Ltd. The main drafters of this part are. Song Yanyuan, Fu Jianhua, Han Qingji, Han Chao, Liu Ruwei, Zhang Laibin, Li Dong, Wang Jiade, Chen Xihuan, Zhang Wanhong, Guo Lixiong. This part of the previous version of the standard to replace the release of the situation. --- GB/T 13288-1991.

Introduction

Regardless of what kind of abrasive and cleaning methods used in the surface treatment of steel, it is possible to form the surface of the steel after jet cleaning. Up to the irregularities of the crests and troughs. Due to this irregularity, resulting in the accuracy of the surface roughness can not be measured. because In this case, the roughness profile is proposed to be divided into recessed form (cleaned with pellet abrasive) and pointed (with sand abrasive cleaning), and the roughness Divided into "fine", "medium" and "thick" three, each grade definition see GB/T 13288.1 provisions. These surface features are considered to be given Most of the coating features are sufficient. Enough to meet most of the coating requirements. It is particularly noteworthy that the "fine", "medium" and "coarse" grades represent different ranges of roughness characteristics, depending on the spray cleaning surface Is the abrasive or abrasive. Thus, the effects of the "fine", "medium" and "coarse" grades on the coating can be achieved not only by special surface features but also ("Fine", "medium" and "thick") and the type of abrasive used. This test method requires the following details. These contents shall comply with ISO 8501, ISO 8503 and ISO 8504 parts Similar to the provisions of the standard, or the terms of the parties concerned. a) the time and position of the grade assessment, ie assessing the frequency at which jet cleaning occurs and the distance between the assessment points; b) the type of abrasive used for jet cleaning, i.e., pellet abrasive or grit abrasive or a mixture of both; c) the roughness level required for the jet cleaning surface (see note), "fine", "medium" or "thick", and the surface rust before jetting (See ISO 8501-1); d) If necessary, compare the type of sample block, ie compare sample block G or compare sample block S. Note. The corrosion grade of the steel indicates the "original" roughness of the steel surface, which will affect the roughness of the surface after cleaning. The "second" roughness is the jet The roughness formed on the basis of the "original" roughness during the cleaning process is exactly what the "second" roughness is required to use the reference comparison sample for evaluation The roughness. Due to mechanical or flame cutting, drilling and other reasons caused by the sharp edges are not in the "original" roughness within the range, before the abrasive jet cleaning Should be worn away. Surface treatment of steel before coating Surface roughness characteristics of steel after jet cleaning Part 2. abrasive spray after cleaning steel Comparison of surface roughness grades

1 Scope

This part of GB/T 13288 specifies the surface roughness rating visual and touch rating, using any of the provisions of ISO 8504-2 The surface roughness of steel produced by abrasive cleaning shall be assessed in accordance with the provisions of this part. The method uses ISO surface roughness comparison sample, in the field to assess the coating before the abrasive jet cleaning steel surface rough Roughness. Note. The ISO surface roughness comparison sample can also be used to assess the surface roughness of other substrates after abrasive jet cleaning, and is not limited to the determination of coating coatings Front surface. The method is applicable to the surface of the steel which is cleaned by pellets or grit abrasive, and the sprayed appearance of the whole surface is Sa2⅟2 and Sa3 in ISO 8501-1. This method is applicable to surfaces cleaned by metal or nonmetallic abrasives.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 4618 Paints and Varnishes Terms and Definitions (Paintsandvarnished-Termsanddefinitions) ISO 8501-1 Specimen for steel surface treatment before coating - Visual assessment of surface cleanliness - Part 1. Uncoated steel sheet Surface and complete removal of the original coating after the steel surface corrosion level and treatment level (Preparation ofsteelsubstratesbefore applicationofpaintsandrelatedproducts-Visualassessmentofsurfacecleanliness-Part 1. Rust gradesandpreparationgradesofuncoatedsteelsubstratesandofsteelsubstratesafteroveralremoval ofpreviouscoatings ISO 8503-1 Surface coating of steel before coating - Surface roughness characteristics of steel after jet cleaning - Part 1. The technical requirements and definitions of the ISO surface roughness of the surface roughness of the steel after the fixed jet cleaning (Preparation ofsteel Substratebeforeapplicationofpaintsandrelatedproducts-Surfaceroughness characteristicsof blast-cleanedsteelsubstrates-Part 1. SpecificationsanddefinitionsforISO surfaceprofilecomparatorsfor theassessmentofabrasiveblast-cleanedsurfaces ISO 8503-3 Surface coating of steel before coating - Surface roughness characteristics of steel after jet cleaning - Part 3. ISO table Surface roughness comparison of the sample block calibration and surface roughness of the method of microscopy focus method (Preparationofsteelsubstrates beforeapplicationofpaintsandrelatedproducts-Surfaceroughness characteristicsofblast-cleaned steelsubstrates-Part 3. MethodforthecalibrationofISO surfaceprofilecomparatorsandforthede- terminationofsurfaceprofile-Focusingmicroscopeprocedure ISO 8503-4 Steel surface treatment before coating - Surface roughness characteristics of steel after jet cleaning - Part 4. ISO table Comparison of surface roughness comparison sample and method for determination of surface roughness Method of preparation method (Preparation ofsteelsubstratesbefore

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13288.2-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13288.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13288.2-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13288.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.