GB/T 13053: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13053-2025 | English | 499 |
Add to Cart
|
4 days [Need to translate]
|
Bus inner dimensions
| Valid |
GB/T 13053-2025
|
| GB/T 13053-2008 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Bus inner dimensions
| Valid |
GB/T 13053-2008
|
| GB/T 13053-1991 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Bus driver compartment dimensions
| Obsolete |
GB/T 13053-1991
|
Basic data | Standard ID | GB/T 13053-2025 (GB/T13053-2025) | | Description (Translated English) | Bus inner dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T42 | | Classification of International Standard | 43.080.20 | | Word Count Estimation | 25,272 | | Date of Issue | 2025-08-29 | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 13053-2008 | | Issuing agency(ies) | State Administration for Market Regulation; Standardization Administration of China | GB/T 13053-2008: Bus inner dimensions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Bus inner dimensions
ICS 43.080.20
T42
National Standards of People's Republic of China
Replacing GB/T 13053 ~ 13056-1991
Carriage Dimensions
Posted 2008-02-03
2008-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 13053-1991 "bus driver's size", GB/T 13054-1991 "bus driver's dimensions term"
GB/T 13055-1991 "bus passenger area size", GB/T 13056-1991 "bus passenger area the size of the term."
This standard replaces the standard, compared to the main changes are as follows.
a) GB/T 13054-1991 and GB/T 13056-1991 "terminological" and GB/T 13053-1991 and GB/T 13055-
1991 "Project" in this Standard referred to as "term."
b) the same before and after the revision of the terms, description of the term or dimensional changes are.
--- The standard 3.4.9,3.4.10 (trunk lines, thigh center line) corresponding to GB/T 13054-1991 of 4.40,4.41;
--- The standard 3.4.11 ~ 3.4.14 (H point, R-point, R 'point, G point) corresponding to the GB/T 13054-1991 of 3.9 to 3.12;
--- The standard 3.4.15 (eye point) corresponding to the GB/T 13054-1991 4.29;
--- The standard 3.4.16 (driver's) corresponding to GB/T 13054-1991 4.1;
--- The standard 3.4.18 (hinged pedal) corresponding to the GB/T 13054-1991 4.42;
--- The standard 3.4.20 (accelerator pedal center) corresponding to GB/T 13054-1991 4.36;
--- The standard 3.4.22 (clutch pedal center) corresponding to GB/T 13054-1991 4.34;
--- The standard 3.4.31 (steering wheel center) corresponding to GB/T 13054-1991 4.23;
--- The standard 3.4.33 (steering wheel diameter) corresponding to GB/T 13054-1991 4.19 and GB/T 13053-1991 4.8;
--- The standard 3.4.40 "the lowest point of the lower edge of the steering wheel", corresponding to GB/T 13054-1991 4.22;
--- The standard 3.4.44 (lower edge of the instrument panel to the surface from the floor) corresponding to GB/T 13053-1991 4.7;
--- GB/T 13053-1991;
--- GB/T 13054-1991;
--- GB/T 13055-1991;
--- GB/T 13056-1991.
Carriage Dimensions
1 Scope
This standard specifies the three-dimensional coordinate system bus, the size of the driver's and passenger area, terminology and code.
The standard term for all types of passenger cars.
This standard does not include driving zone appliances, lamps, instruments, indicators and the like terms and size requirements.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 15089 classification of motor vehicles and trailers
GB/T 15759 body template design and usage requirements
3 Terms, code and size
Terms and GB 3.1 GB/T 15089 stipulated/T 15759 Level 3 model provisions apply to this standard.
3.2 standard defines each term and size of the code. The term code by the letter of the English name of the representative of the composition, size code letters
And numbers and letters indicating the size of the type number indicates the size of the number. Correspondence between the type and size of the letter is as follows.
--- L of the length, perpendicular to the reference plane X;
--- The W width, perpendicular to the reference plane Y;
--- Height of the H, Z perpendicular to the reference plane;
D --- diameter;
α --- angles;
A --- other dimensions.
3.3 standard defines the size of the design dimensions, including.
--- When using the steering wheel angle-adjustable steering column adjustable in length or structure, the steering wheel should be in the middle of the design specified by the manufacturer;
The driver's seat should be located in the design reference position, backrest should be in the design torso angle position, the passenger seat should be located in the reference position.
3.4 Terminology and symbols in Table 1.
Table 1
Clause No. corresponding word in English terminology Terminology code reference values \u200b\u200bshown
3.4.1 longitudinal symmetry plane of the vehicle reference Y plane zeroYplane OYP 1
3.4.2 Z reference plane zeroZplane
By bus and plane perpendicular to the base frame
Straight to the plane of the reference plane Y
OZP 1
3.4.3 X reference plane zeroXplane
Through the center of the front wheel and perpendicular to the reference
Y plane and the reference plane Z plane
OXP 1
3.4.4 Y plane Yplane
Either parallel to the reference plane is a Y
YP plane
3.4.5 Z plane Zplane
Parallel to the reference plane Z either
ZP plane
|