HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 1186-2016 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1186-2016: Rubber hoses, textile-reinforced, for compressed air -- Specification
Status: Valid

GB/T 1186: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 1186-2016English194 Add to Cart 3 days [Need to translate] Rubber hoses, textile-reinforced, for compressed air -- Specification Valid GB/T 1186-2016
GB/T 1186-2007English279 Add to Cart 3 days [Need to translate] Rubber hose, textile-reinforced, for compressed air -- Specification Obsolete GB/T 1186-2007
GB/T 1186-1992English279 Add to Cart 3 days [Need to translate] Rubber hose for compressed air (up to 2. 5 MPa) Obsolete GB/T 1186-1992

PDF similar to GB/T 1186-2016


Standard similar to GB/T 1186-2016

GB/T 3683   GB/T 3685   GB/T 1171   GB/T 5568   

Basic data

Standard ID GB/T 1186-2016 (GB/T1186-2016)
Description (Translated English) Rubber hoses, textile-reinforced, for compressed air -- Specification
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G42
Classification of International Standard 23.040.70
Word Count Estimation 10,191
Date of Issue 2016-12-13
Date of Implementation 2017-07-01
Older Standard (superseded by this standard) GB/T 1186-2007
Regulation (derived from) National Standard Announcement No.2816 of 2016
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 1186-2016: Rubber hoses, textile-reinforced, for compressed air -- Specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber hoses, textile-reinforced, for compressed air - Specification ICS 23.040.70 G42 National Standards of People's Republic of China Replacing GB/T 1186-2007 Specification for reinforced rubber hoses for compressed air (ISO 2398..2006, IDT) 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 Category 1 Material and structure 6 size 2 6.1 ID and Tolerance 2 6.2 concentricity 3 6.3 Length Tolerance 3 6.4 Minimum thickness of liner and overcoat 3 7 Physical properties 3 7.1 Mixing rubber 3 7.2 finished hose 4 8 sign 4

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 1186-2007 "reinforced rubber hose for compressed air". Compared with GB/T 1186-2007 The technical changes are as follows. - modified scope (see Chapter 1, Chapter 1 of the.2007 edition); - Added terms and definitions (see Chapter 3); - modified the classification of the hose (see Chapter 4, Chapter 3 of the.2007 edition); --- modified the hose "inside diameter" requirements (see 6.1,.2007 version 5.1); --- increased the hose "concentricity" requirement (see 6.2); - increased the length of the hose "tolerance" (see 6.3); --- increased the physical performance requirements of the hose "compound" (see 7.1); --- Added "bending test" (see 7.2). This standard uses the translation method equivalent to ISO 2398..2006 "compressed air with fabric reinforced rubber hose specification". And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. Determination of tensile stress - strain properties of vulcanized rubber or thermoplastic rubber (ISO 37..2005, IDT); GB/T . Vulcanized rubber or thermoplastic rubber - Test method for resistance to liquids (ISO 1817..2005, MOD); GB/T 3512-2014 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test (ISO 188..2011, IDT); GB/T 5563-2013 Rubber and plastics hoses and hose assemblies - Hydrostatic test method (ISO 1402..2009, IDT); GB/T 9573-2013 Rubber and plastics hoses and hose assemblies - Hose dimensions and hose length measurement method (ISO 4671..2007, IDT); --- GB/T 9575-2013 Rubber and plastic hose hose specifications and maximum and minimum internal diameter and cutting length tolerance (ISO 1307. 2006, IDT); Rubber and plastics hoses - Determination of bond strength between layers (ISO 8033..2006, IDT) GB/T 14905-2009. This standard has made the following editorial changes. - delete the "bar" unit in the text, leaving only the "MPa" unit. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard is nationalized by the National Rubber and Rubber Products Standardization Technical Committee Hose Subcommittee (SAC/TC35/SC1). The drafting of this standard unit. Penglai Ao of Rubber Products Co., Ltd., Shenyang Rubber Research and Design Institute Co., Ltd. The main drafters of this standard. Li Guangyuan, Wang Shuli, Li Liang, Kong Bo. This standard replaced the previous version of the standard release. GB/T 1186-1981, GB/T 1186-1992, GB/T 1186-2007. Specification for reinforced rubber hoses for compressed air Caution - Personnel using this standard should be familiar with formal laboratory procedures. This standard is not intended to involve the use of this standard may occur All the security issues. It is the user's responsibility to develop appropriate safety and health regimes and to ensure compliance with national regulations.

1 Scope

This standard specifies the maximum working pressure for compressed air at 2.5MPa and the operating temperature range according to the category at -40 ℃ ~ 70 ℃ Between the three types, three levels and two types of rubber hose requirements.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 5564-2006 Rubber and plastic hoses Low temperature flexing test (ISO 4672..1997, IDT) Rubber or plastic reinforced hoses and non - reinforced hoses bending test (ISO 1746..1998, IDT) GB/T 5565-2006. GB/T 7528-2011 Terminology for rubber and plastic hoses and hose assemblies (ISO 8330..2007, IDT) Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326..2006, IDT) GB/T 24134-2009 ISO 37 vulcanized rubber or thermoplastic rubber tensile stress and strain properties of the determination (Rubber, vulcanizedor thermoplastic-Determinationoftensilestress-strainproperties ISO 188 vulcanized rubber or thermoplastic rubber - accelerated aging or heat resistance test (Rubber, vulcanizedorthermoplastic- Acceleratedageingandheatresistancetests) ISO 1307 Rubber and plastic hose Hose specifications and maximum and minimum internal and cutting length tolerances (Rubberandplasticsho- ses-Hosesizes, minimumandmaximuminsidediametersandtolerancesoncutlengths) ISO 1402 Rubber and plastic hoses and hose assemblies Hydrostatic test method (Rubberandplasticshosesandhose assemblies-Hydrostatictesting) ISO 1817 vulcanized rubber - the determination of the impact of liquid (Rubber, vulcanized-Determinationoftheeffectsofliq- uids ISO 4671 Rubber and plastic hoses and hose assemblies Hose size and hose assembly length measurement method (Rubberand plasticshosesandhoseassemblies-Methodsofmeasurementofdimensions) ISO 8033 Determination of adhesive strength between rubber and plastic hoses (Rubberandplasticshoses-Determinationof adhesionbetweencomponents)

3 terms and definitions

The terms and definitions defined in GB/T 7528-2011 apply to this document.

4 classification

According to the design pressure, the hose type is as follows. --- 1 type. low pressure --- design maximum working pressure of 1.0MPa;

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1186-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1186-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1186-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1186-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1186-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1186-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.