HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 11365-2019 English PDF

US$564.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11365-2019: Bevel gears - ISO system of accuracy
Status: Valid

GB/T 11365: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11365-2019English564 Add to Cart 6 days [Need to translate] Bevel gears - ISO system of accuracy Valid GB/T 11365-2019
GB/T 11365-1989EnglishRFQ ASK 7 days [Need to translate] Accuracy of bevel and hypoid gears Obsolete GB/T 11365-1989

PDF similar to GB/T 11365-2019


Standard similar to GB/T 11365-2019

GB/T 10095.2   GB/T 10095.1   GB/T 10088   GB/T 19935   GB/T 19936.2   

Basic data

Standard ID GB/T 11365-2019 (GB/T11365-2019)
Description (Translated English) Bevel gears - ISO system of accuracy
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J17
Classification of International Standard 21.200
Word Count Estimation 30,397
Date of Issue 2019-10-18
Date of Implementation 2020-05-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 11365-2019: Bevel gears - ISO system of accuracy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Bevel gears--ISO system of accuracy ICS 21.200 J17 National Standards of People's Republic of China Replace GB/T 11365-1989 Bevel gear precision system (ISO 17485.2006, IDT) Published on.2019-10-17 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword I 1 Scope 1 2 Normative references 1 3 terms and definitions, symbol 1 3.1 Terms and Definitions 1 3.2 Basic terms and symbols 4 4 Application of precision level system 6 4.1 Overview 6 4.2 accuracy level 7 4.3 Tolerance direction 7 4.4 Additional Features 7 5 tolerance 7 5.1 Tolerance value 7 5.2 Grading factor 7 5.3 Rounding rule 8 5.4 Tolerance Formula 8 6 Use of measurement methods 9 6.1 Measurement method 9 6.2 Recommended Measurement Control Method 10 6.3 Filtering of measurement data 11 6.4 Tooth contact speckle inspection 11 Appendix A (informative) tolerance example table 12 Appendix B (informative) Single-sided meshing integrated measurement method 14 Appendix C (informative) Accuracy of small modulus bevel gears 18 Appendix D (informative) Comprehensive data description 20 Reference 26

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 11365-1989 "Bevel and Hypoid Gear Accuracy", compared with GB/T 11365-1989, the main The technical changes are as follows. ---Tolerance value is originally given by the table, and is calculated by the formula; ---The definition of terms is revised from 23 items to 10 items. If the tangential comprehensive error is changed to the tangential total deviation, the terminology of the transmission error is increased. Righteousness, the total error of the axis intersection angle, the relative error of the tooth profile, etc. are deleted; some terms are defined in the informational appendix, such as double-sided meshing Deviation, etc. This standard uses the translation method equivalent to ISO 17485.2006 "Bevel Gear Precision System". This standard has made the following editorial changes. --- The first use of fis in Tables 1 and 2 was changed from "3.1.6" to "3.1.5"; --- The first use of Ri in Table 1 was changed from "Figure 1" to "Figure 2"; --- Fis (design) in Table 2 is changed to fis (design); --- The formula on the right side of the formula 5.4 "(2)" ~ "(9)" is changed to "(4)" ~ "(11)", the formula number in the paragraph text is unchanged. This standard is proposed and managed by the National Gear Standardization Technical Committee (SAC/TC52). This standard was drafted. Henan University of Science and Technology, Zhengzhou Machinery Research Institute Co., Ltd., Shandong Huacheng Zhongde Transmission Equipment Co., Ltd., Hal Binjingda Measuring Instrument Co., Ltd., Beijing University of Technology, Jiangsu Zhonggong High-end Equipment Research Institute Co., Ltd., Northwestern Polytechnical University, Beijing Airlines Aerospace University. The main drafters of this standard. Wei Bingyang, Wang Zhigang, Deng Xiaozhong, Li Tianxing, Ruan Guoqiang, Zhou Guangcai, Cao Xuemei, Mao Wei, Liu Shijun, Wu Luji, Guan Hongjie, Shi Zhaoyao, Wang Changlu, Zhao Ning, Wang Yanzhong, Tao Changbin, Zhang Yuanguo. The previous versions of the standards replaced by this standard are. ---GB/T 11365-1989. Bevel gear precision system

1 Scope

This standard specifies the accuracy terminology, grade and tolerance values for unassembled bevel gears, hypoid gears and their components. Tooth profile Terminology, hierarchy, and allowable values for precision. This standard provides a uniform tolerance scale for both the supply and demand sides, and defines 10 accuracy levels. From level 2 to level 11, the accuracy is reduced step by step. The tolerance calculation formula for gear accuracy and its applicable range are specified in 5.4. The scope of application of these formulas is as follows. 1.0mm≤mmn≤50mm 5≤z≤400 5mm≤dT≤2500mm among them. Mmn---midpoint normal modulus; z --- number of teeth; dT --- Tolerance reference diameter. The measurement methods recommended by this standard are described in Chapter 6. The tolerance value is calculated according to the specific size of the bevel gear and is not given in the form of a data table. Out. However, for the sake of clarity, Appendix A gives a table and illustrations of partial tolerance values. This standard does not apply to reducers, speed increasers, gear motors, shaft-mounted reducers, high-speed transmissions and other applications according to a given power, speed, transmission A closed gear unit that is manufactured in comparison to the application environment. The design of the bevel gear is not limited to the scope of this standard. Determining the accuracy level of the gear that meets the requirements of the working conditions requires a wealth of expertise Work experience. Note. The design tolerance of a single gear cannot directly correspond to the accuracy of the gear pair assembly. Gear tolerances outside the scope of this standard shall be determined based on actual operating conditions. This may require additional tolerance settings, unlike this standard The calculation of the quasi-middle formula.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3374.1-2010 Gear terms and definitions Part 1. Geometric definitions (ISO 1122-1.1998, IDT) ISO 23509 Bevel Gear and Hypoid Gear Geometry (Bevelandhypoidgeargeometry) 3 terms and definitions, symbols The following terms and definitions as defined in GB/T 3374.1-2010 and ISO 23509 apply to this document. Some symbols and terminology contained in this standard may be different from other documents or standards. Users should understand the standard symbols used by themselves. The meaning of numbers, terms, and definitions. 3.1 Terms and definitions 3.1.1 Index deviation indexdeviation FX

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11365-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11365-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11365-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11365-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11365-2019?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11365-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.