Powered by Google www.ChineseStandard.net Database: 189760 (25 May 2024)

GB/T 10088-2018 PDF in English


GB/T 10088-2018 (GB/T10088-2018, GBT 10088-2018, GBT10088-2018)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 10088-2018English70 Add to Cart 0-9 seconds. Auto-delivery. Module and diameter of cylindrical worm Valid


Standards related to: GB/T 10088-2018

GB/T 10088-2018: PDF in English (GBT 10088-2018)

GB/T 10088-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.200
J 17
Replacing GB/T 10088-1988
Module and diameter of cylindrical worm
ISSUED ON. MAY 14, 2018
IMPLEMENTED ON. DECEMBER 1, 2018
Issued by. State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Worm module m ... 4 
4 Standard pitch diameter d1 of worm ... 5 
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 10088-1988 “Module and diameter of cylindrical
worm”.
As compared with GB/T 10088-1988, the main changes of this Standard are as
follows.
- ADD the Foreword of the standard.
Attention is drawn to the possibility that some of the elements of this document
may be the subject of patent rights. The issuing authority of this document shall
not be held responsible for identifying any or all such patent rights.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee 52 on Gears of Standardization Administration of China
(SAC/TC 52).
Drafting organizations of this Standard. Chongqing Machine Tool (Group) Co.,
Ltd., Zhengzhou Research Institute of Mechanical Engineering Co., Ltd., Beijing
University of Technology.
Main drafters of this Standard. Li Xianguang, Li Yi, Yu Kebin, Zhang Yuanguo,
Shi Zhaoyao, Wang Zhigang, Lu Jun.
The previous editions of the standard replaced by this Standard were released
as follows.
- GB/T 10088-1988.
Module and diameter of cylindrical worm
1 Scope
This Standard specifies the module and diameter of cylindrical worm.
This Standard applies to worms of cylindrical worm gears.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this document.
GB/T 10085 Basic parameters of cylindrical worm gears
3 Worm module m
The worm module m is the axial module of worm. The worm module m shall be
selected according to the values specified in Table 1. The first series shall be
used preferentially.
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.