HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (26 Oct 2025)

GB/T 11356.1-2008 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11356.1-2008: Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
Status: Valid

GB/T 11356.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11356.1-2008English279 Add to Cart 3 days [Need to translate] Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves Valid GB/T 11356.1-2008
GB/T 11356.1-1997English399 Add to Cart 3 days [Need to translate] Belt drives--Pulleys for classical and narrow V-belts drives (system based on datum width)--Geometrical inspection of grooves Obsolete GB/T 11356.1-1997
GB/T 11356-1989EnglishRFQ ASK 3 days [Need to translate] Pulley for classical and narrow V-belts drires--Geometrical inspection of groove Obsolete GB/T 11356-1989

PDF similar to GB/T 11356.1-2008


Standard similar to GB/T 11356.1-2008

GB/T 11357   GB/T 10414   GB/T 13487   GB/T 11356.2   GB/T 11362   GB/T 11361   

Basic data

Standard ID GB/T 11356.1-2008 (GB/T11356.1-2008)
Description (Translated English) Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J18
Classification of International Standard 21.220.10
Word Count Estimation 12,190
Date of Issue 2008-04-16
Date of Implementation 2008-10-01
Older Standard (superseded by this standard) GB/T 11356.1-1997
Quoted Standard GB/T 10412
Adopted Standard ISO 255-1990, MOD
Regulation (derived from) National Standard Approval Announcement 2008 No.5 (Total No.118)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the conventional testing methods based on datum width of the pulley wheels and narrow V grooves. Pulley detection parameters and tolerances specified in GB/T 10412 in.

GB/T 11356.1-2008: Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt drives. Pulleys for V-belts (system based on datum width). Geometrical inspection of grooves ICS 21.220.10 J18 National Standards of People's Republic of China Replacing GB/T 11356.1-1997 Vp belt drive pulley (datum width) Geometrical inspection (ISO 255.1990, MOD) Posted 2008-04-16 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 11356 "V belt drive pulley groove test" consists of two parts. --- GB/T 11356.1 V belt drive pulley (datum width) Groove inspection; --- GB/T 11356.2 V belt drive pulley (effective width) Groove inspection. This section is GB/T Part of 111,356. The partial modification of the use of ISO 255.1990 "Geometrical inspection V belt drive pulley (datum width)." It is consistent with the existing national standards belt drive, this part of the ISO 255.1990 Symbol in the following modifications. --- Reference width symbol "Wd" to "Chou d"; --- Groove angle symbol "α" to "φ"; This Part replaces GB/T 11356.1-1997 "transmission belt and narrow V pulley (datum width) - Geometrical inspection." Section compared with the GB/T 11356.1-1997 The main changes are as follows. --- According to the ISO standard format, the standard structure of the arrangement; --- Increased names figure; --- Increased introduction; --- Range to add a "pulley groove detection parameters and tolerances" description; --- Increasing the ISO standard references in the original; --- 6.2 adds support for multi-groove pulley groove inspection requirements; --- Increased by reference. Appendix A of this part is a normative appendix. This section is proposed and managed by the China Machinery Industry Federation. This section is drafted. the machine Productivity Promotion Center. The main drafters of this section. Qin Shuan Huang Gang. This part of the Central Machine Productivity Promotion Center is responsible for interpretation. This part of the standard replaces the previous editions are. --- GB 11356-1989; --- GB/T 11356.1-1997.

Introduction

When using the V-belt drive, the size of the pulley wheel groove may be based on datum width or effective width is defined, and therefore developed a pulley Both systems with defined size and description. Two systems independent of each other. Based on the reference pulley groove width defined test developed by specifying the necessary machinery to ensure that detection methods with the actual wheel geometry and standard Pulley groove consistency. But there is no provision to control the rapid test method or a continuous groove pulley groove of products. Vp belt drive pulley (datum width) Geometrical inspection

1 Scope

GB/T 11356 provisions of this part of the conventional test methods based on datum width of the pulley wheels and narrow V grooves. Pulley detection parameters and tolerances specified in GB/T 10412 in.

2 Normative references

The following documents contain provisions which, through reference GB/T 11356 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 10412 and narrow V - pulley (datum width) (ISO 4183.1995, MOD)

3 Basic Program

Pulley inspection according to the following four successive test procedures. a) Inspection groove cross section (see Chapter 4); b) Test groove pitch (see Chapter 5); c) test reference diameter (see Chapter 6); d) test runout (see Chapter 7). 4-slot test section 4.1 channel cross-sectional dimension Sectional groove particular size should comply with the relevant standards, test parameters shown in Figure 1 and Table 1. FIG. 1 a cross-sectional groove

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11356.1-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11356.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11356.1-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11356.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11356.1-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11356.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

Refund Policy     Privacy Policy     Terms of Service     Shipping Policy     Contact Information