HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 11313.42-2021 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11313.42-2021: Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF connectors
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11313.42-2021English459 Add to Cart 4 days [Need to translate] Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF connectors Valid GB/T 11313.42-2021

PDF similar to GB/T 11313.42-2021


Standard similar to GB/T 11313.42-2021

GB/T 17737.100   GB/T 21711.1   GB/T 11313.40   GB/T 11313.41   GB/T 11313.35   

Basic data

Standard ID GB/T 11313.42-2021 (GB/T11313.42-2021)
Description (Translated English) Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF connectors
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L23
Word Count Estimation 24,284
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 11313.42-2021: Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF connectors


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio-frequency connectors -- Part 42: Sectional specification for CQN series quick lock RF connectors ICS 33:120:30 L23 National Standards of People's Republic of China RF Connector Part 42: CQN Series Quick Lock RF Connector sub-specification (IEC 61169-42:2013,Radio-frequencyconnectors-Part 42:Sectional 2021-12-31 Released 2022-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration `directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Mating interface and standard gauge 1 3:1 Universal Connector Dimensions---Class 2 1 3:2 Standard Specification 4 3:3 Standard Test Connector Dimensions---Class 0 5 4 Quality assessment procedures8 4:1 General 8 4:2 Ratings and Characteristics 8 4:3 List of tests and inspection requirements 10 4:4 Procedure 13 5 Guidelines for Detailed Specification Development 13 5:1 General 13 5:2 Identification of detail specifications 13 5:3 Identification of components 13 5:4 Performance 14 5:5 Marks, order documents and related matters 14 5:6 Selection of tests, test conditions and severity 14 5:7 Blank Detail Specification Format for CQN Series Quick Lock RF Connectors 14 Figure 1 Pin Connector 2 Figure 2 Jack Connector 3 Figure 3 Standard gauge 4 for the center contact of a jack connector Figure 4 Standard gauge for pin connector outer contact 4 Figure 5 Pin Standard Test Connector 6 Figure 6 Jack Standard Test Connector 7 Table 1 Pin Connector Dimensions 2 Table 2 Jack Connector Dimensions3 Table 3 Standard gauge dimensions for center contacts of jack connectors4 Table 4 Standard gauge dimensions for outer contacts of pin connectors 5 Table 5 Pin Standard Test Connector Dimensions 6 Table 6 Jack Standard Test Connector Dimensions7 Table 7 Preferred climate categories8 Table 8 Ratings and Characteristics8 Table 9 Delivery test 11 Table 10 Periodic test 11

foreword

GB/T 11313 "Radio Frequency Connector" consists of the following parts: --- Part 1: General requirements and test methods of the general specification; --- Part 2: Sub-specification for Type 9:52 RF coaxial connectors; --- Part 4: Radio frequency coaxial connection with outer conductor inner diameter of 16mm (0:63in), characteristic impedance of 50Ω, and screw connection device (type 7-16); --- Part 8: RF coaxial connection with outer conductor inner diameter of 6:5mm (0:256in), characteristic impedance of 50Ω (75Ω) and bayonet connection Connector (BNC type) sub-specification; --- Part 9: SMC series radio frequency coaxial connector sub-specification; --- Part 10: Sub-specification for SMB series RF coaxial connectors; --- Part 11: RF coaxial connector with outer conductor inner diameter of 9:5mm (0:374in), characteristic impedance of 50Ω, and screw connection (4:1/9:5 type) sub-specification; --- Part 13: Sub-specification for type 1:6/5:6 and 1:8/5:6 RF coaxial connectors; --- Part 15: RF coaxial connector with outer conductor inner diameter of 4:13mm (0:163in), characteristic impedance of 50Ω, and screw connection (SMA type); --- Part 16: Radio frequency coaxial connection with outer conductor inner diameter of 7mm (0:276in), characteristic impedance of 50Ω (75Ω) and screw connection Connector (N type) sub-specification; --- Part 18: Sub-specification for SSMA series RF coaxial connectors; --- Part 19: SSMB type radio frequency coaxial connector sub-specification; --- Part 24: Sub-specification for threaded RF coaxial connectors (type F) for 75Ω cable distribution systems; --- Part 29: 50Ω and 75Ω with a characteristic impedance of 50Ω, with threaded, push-pull, quick-lock or slide rail racks or panels with small Type RF coaxial connectors (Type 1:0/2:3) sub-specification; --- Part 33: Sub-specification for BMA series radio frequency connectors; --- Part 35: 2:92 Series RF Connector Sub-Specification; --- Part 36: Snap-connect miniature RF coaxial connectors (MCX type) with a characteristic impedance of 50Ω; --- Part 37: Sub-specification for STWX8 series RF coaxial connectors; --- Part 38: Sub-specification for modular slide-in RF connectors (type TMA) for 50Ω backplanes and panels; --- Part 39: Sub-specification for CQM series quick-lock RF connectors; --- Part 40: 2:4 Series RF Connector Sub-Specification; --- Part 41: Sub-specification for CQA series quick-lock RF connectors; --- Part 42: Sub-specification for CQN series quick-lock RF connectors; --- Part 43: RBMA series blind-mate RF coaxial connectors sub-specification; --- Part 101: MMCX series radio frequency coaxial connector sub-specification; --- Part:201: Electrical test methods for reflection coefficient and voltage standing wave ratio; --- Part 202: Electrical test methods for insertion loss: This part is Part 42 of GB/T 11313: This section is drafted in accordance with the rules given in GB/T 1:1-2009: This section uses the redrafting method to modify the use of IEC 61169-42:2013 "RF Connector Part 42: CQN Series Quick Lock Tight RF Coaxial Connectors Sub-Specification: The technical differences between this part and IEC 61169-42:2013 and their reasons are as follows: --- Adjust the "original dimensions are metric dimensions, all unmarked graphic structures are for reference only" in 3:1:1 to the note in Chapter 1; --- Modified the label in Figure 1, and deleted the detail I in Figure 1; ---Modified the maximum value of b and c in Table 1, deleted the column of remarks in the table and the paragraph in the table, and added footnotes to the code a, e, k Be explained; --- Modified the deviation value of the angle in Figure 2, added the provisions of the angle of 20 ° ± 2 °, and modified the symbols of some dimensions in Figure 2; ---Modified the minimum value of e in Table 2, modified some codes in the table according to the change of dimension symbols in Figure 2, and deleted Remark 1 in the table Columns and paragraphs in the table, footnotes have been added to explain the codes a, k, p; --- Added standard gauge B for insertion force test in Table 3, and changed the original standard gauge B to standard gauge C; --- Modified the test procedure in 3:2:2 of the international standard and merged it into 3:2:1; --- Added the standard gauge for pin connector outer contacts as 3:2:2, and at the same time, added Figure 4 and Table 4, after which the chart number is extended; --- Modified the diameter size in Figure 5, and deleted the detail I; --- Modified the maximum value of code b and c in Table 5, deleted the note in the table, and added a footnote to explain a and e; --- Modified the deviation value of the angle in Figure 6, added the provisions of the angle of 20 ° ± 2 °, and modified the symbols of some dimensions in Figure 6; ---Modified the minimum value of the code e in Table 6, modified some codes in the table according to the change of the size symbol in Figure 6, and deleted the code in the table: Note, added footnotes to explain a, k, p; --- Added the preferred climatic categories in Table 7, after which the table numbers are extended; --- Modified the patch cables in the withstand voltage and the withstand voltage after the environmental test in Table 8; --- Added the identification of detailed specifications in 5:2, and the subsequent chapter numbers are extended; --- Added the provisions of (5) in 5:3 on the serial code; --- Added serial numbers (2) and (3) in 5:7 Blank Detail Specification Format: The following editorial changes have been made to this section: --- In order to coordinate with existing standards, the standard name was changed to "RF Connectors Part 42: CQN Series Quick Lock RF Connectors" Connector Specifications"; --- In accordance with the requirements of GB/T 1:1-2009, the preparation of the chapter "Scope" is standardized: This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This part is under the jurisdiction of the National Standardization Technical Committee of High Frequency Cables and Connectors for Electronic Equipment (SAC/TC190): This section is drafted by: Shaanxi Huada Technology Co:, Ltd:, China Electronics Standardization Institute: The main drafters of this section: Zhao Jianchuang, Qiao Xiaoyan, Ren Qiang, Qu Jinliang, Wu Zhengping:

Introduction

The issuing body of this document draws attention to the fact that the declaration of compliance with this document may involve the locking of products in 3:1:1, 3:1:2, 3:2:1, 3:2:2 Use of related patents for tight structure and zero clearance pressure on the end face: The issuing authority of this document has no position on the authenticity, validity and scope of this patent: The patent holder has assured the issuing body of this document that he is willing to agree to any applicant on reasonable and non-discriminatory terms and conditions, Negotiate patent licensing: This patent holder's statement is on file with the issuing agency of this document: Relevant information can be obtained through the following Get in touch with: Name of patent holder: Qu Jinliang Address: No: 3 Electronic West Street, Electronic City, Xi'an City Please note that in addition to the patents mentioned above, some content of this document may still involve patents: The issuing agency of this document does not undertake to identify these benefit responsibilities: RF Connector Part 42: CQN Series Quick Lock RF Connector sub-specification

1 Scope

This part of GB/T 11313 specifies the mating interface, standard specifications and quality assessment procedures of CQN series quick-lock RF connectors Preface, detailed specification development guide, blank detailed specification format: This part specifies the dimensions of the mating interface of the class 2 universal connector, the specific dimensions of the class 0 standard test connector, and the GB/T 11313:1-2013 selects the rule contents and tests applicable to all detailed specifications of CQN series connectors: This section provides recommended performance characteristics to consider when preparing a detailed specification, including tests for M and H rating levels: Checklist and inspection requirements: This part is applicable to 50Ω characteristic impedance, the highest operating frequency up to 11GHz, used in radio equipment and instruments to connect radio frequency power CQN series quick lock RF connectors for cable or microstrip: Note: The original dimensions of this part are metric dimensions, and all graphic structures without dimensions are for reference only:

2 Normative references

The following documents are essential for the application of this document: For dated references, only the dated version applies to this article pieces: For undated references, the latest edition (including all amendments) applies to this document: GB/T 11313:1-2013 RF Connectors Part 1: General Specifications General Requirements and Test Methods (IEC 61169-1: 1998, IDT)

3 Mating interface and standard gauge

3:1 Universal Connector Dimensions---Class 2 3:1:1 Pin Connectors The pin connector interface is shown in Figure 1, and the dimensions are shown in Table 1:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11313.42-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11313.42-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11313.42-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11313.42-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.