HOME   Cart(4)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 11313.41-2021 English PDF

US$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11313.41-2021: Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11313.41-2021English489 Add to Cart 5 days [Need to translate] Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors Valid GB/T 11313.41-2021

PDF similar to GB/T 11313.41-2021


Standard similar to GB/T 11313.41-2021

GB/T 17737.100   GB/T 21711.1   GB/T 11313.40   GB/T 11313.42   GB/T 11313.35   

Basic data

Standard ID GB/T 11313.41-2021 (GB/T11313.41-2021)
Description (Translated English) Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L23
Word Count Estimation 26,228
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 11313.41-2021: Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R. F. coaxial connectors


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio-frequency connectors - Part 41.Sectional specification for CQA series quick lock RFcoaxial connectors ICS 33.120 L23 National Standards of People's Republic of China RF connector Part 41.CQA Series Quick Lock RF Connector sub-specification (IEC 61169-41.2011, NEQ) Released on 2021-03-09 2021-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ 1 Scope 1 2 Normative references 1 3 Mating interface and standard gauge 1 3.1 Universal connector size-level 2 1 3.1.1 Pin connector 1 3.1.2 Jack connector 3 3.2 Standard gauge 4 3.2.1 Standard gauges for jack connectors 4 3.2.2 Test procedure 5 3.2.3 Standard gauges for external contacts of pin connectors 5 3.2.4 Test procedure 6 3.3 Standard test connector size --0 level 6 3.3.1 Pin standard test connector 6 3.3.2 Jack standard test connector 8 4 Quality assessment procedures 9 4.1 General 9 4.2 Ratings and characteristics 9 4.3 Test list and inspection requirements 12 4.3.1 Delivery test 12 4.3.2 Periodic test 13 4.4 Procedure 15 4.4.1 Quality consistency inspection 15 4.4.2 Approval of appraisal and its maintenance 15 5 Guide for detailed specification development 15 5.1 General 15 5.2 Identification of detailed specifications 15 5.3 Identification of components 15 5.4 Performance 16 5.5 Marks, order documents and related matters 16 5.6 Selection of test, test conditions and severity 16 5.7 Blank detail specification format of CQA series RF connectors 16 Appendix A (Normative Appendix) Accessories for interchange with SMA connectors 21

Foreword

GB/T 11313 "Radio Frequency Connectors" has or plans to publish the following parts. ---Part 1.General requirements and test methods of the general specification; ---Part 2.Sectional specification for type 9.52 radio frequency coaxial connectors; ---Part 3.Sectional specification for double-pin connectors for double-balanced antenna feeders; ---Part 4.RF coaxial connector with inner diameter of outer conductor of 16mm (0.63in), characteristic impedance of 50Ω, threaded connection (7-16 type); ---Part 5.Sectional specification for radio frequency coaxial connectors for mating with 60096IEC 50-17 and larger cables; ---Part 6.Sectional specification for radio frequency coaxial connectors for mating with 60096IEC 75-17 and larger cables; ---Part 7.RF coaxial connector with inner diameter of outer conductor of 9.5mm (0.374in), characteristic impedance of 50Ω, bayonet connection (Type C) Sub-specification; ---Part 8.RF coaxial connection with inner diameter of outer conductor of 6.5mm (0.256in), characteristic impedance of 50Ω (75Ω), bayonet connection (BNC type) sub-specification; ---Part 9.SMC series radio frequency coaxial connector sub-specification; ---Part 10.Sectional specification for SMB series radio frequency coaxial connectors; ---Part 11.RF coaxial connector with inner diameter of outer conductor of 9.5mm (0.374in), characteristic impedance of 50Ω, threaded connection (4.1/9.5 type) sub-specification; ---Part 12.Sectional specification for non-matching threaded radio frequency coaxial connectors (UHF type); ---Part 13.1.6/5.6 and 1.8/5.6 type radio frequency coaxial connector sub-specification; ---Part 14.The inner diameter of the outer conductor is 12mm (0.472in), the characteristic impedance is 75Ω, and the threaded radio frequency coaxial connector (3.5/12 type) sub-specification; ---Part 15.RF coaxial connector with inner diameter of outer conductor of 4.13mm (0.163in), characteristic impedance of 50Ω, threaded connection (SMA type); ---Part 16.The inner diameter of the outer conductor is 7mm (0.276in), the characteristic impedance is 50Ω (75Ω), and the threaded radio frequency coaxial connection Sectional specification for connectors (Type N); ---Part 17.RF coaxial connector with inner diameter of outer conductor of 6.5mm (0.256in), characteristic impedance of 50Ω, threaded connection (TNC type) sub-standard; ---Part 18.Sectional specification for SSMA series radio frequency coaxial connectors; ---Part 19.Sectional specification for SSMB type radio frequency coaxial connectors; ---Part 20.RF coaxial connector with inner diameter of outer conductor of 2.08mm (0.082in), characteristic impedance of 50Ω, threaded connection (SSMC type) sub-specification; ---Part 21.The inner diameter of the outer conductor is 9.5mm (0.374in), the characteristic impedance is 50Ω, and there are two different types of threaded connections The sub-specification of the radio frequency connector (SC-A and SC-B type); ---Part 22.Sectional specification for double core radio frequency connectors (BNO type) for bayonet connection of double inner conductor shielded symmetrical cables; ---Part 23.Connecting 3.5mm hard precision coaxial cable, the inner diameter of the outer conductor is 3.5mm (0.1378in) radio frequency coaxial connector specification; ---Part 24.Sectional specification for threaded radio frequency coaxial connectors (Type F) for 75Ω cable distribution systems; ---Part 25.Connecting double inner conductor shielded symmetrical cable, outer conductor inner diameter of 13.56mm (0.534in) twin-core screw type (3/4-20UNEF) connector (TWHN type) section specification; ---Part 26.TNCA series radio frequency coaxial connector sub-specification; ---Part 27.Sectional specification for threaded radio frequency coaxial connectors (Type E) for 75Ω cable distribution systems; ---Part 28.The inner diameter of the outer conductor is 5.60mm (0.220in), the characteristic impedance is 75Ω, and the card lock is connected to the radio frequency coaxial connector. specification; ---Part 29.50Ω and 75Ω with characteristic impedance of 50Ω, with threaded, push-pull, quick lock or slide rail rack or panel with small Sectional specification for type radio frequency coaxial connectors (1.0/2.3 type); ---Part 31.RF coaxial connector with inner diameter of outer conductor of 1.0mm (0.039in), characteristic impedance of 50Ω, threaded connection (1.0 type) sub-standard; ---Part 32.RF coaxial connector with inner diameter of outer conductor of 1.85mm (0.072in), characteristic impedance of 50Ω, threaded connection (1.85 type) sub-specification; ---Part 33.Sub-specification for BMA series radio frequency connectors; ---Part 35.2.92 series radio frequency connector sub-specification; ---Part 36.Snap-on miniature radio frequency coaxial connector (MCX type) with characteristic impedance of 50Ω; ---Part 37.STWX8 series radio frequency coaxial connector sub-specification; ---Part 38.Sectional specification for 50Ω backplane and panel modular sliding-in radio frequency connectors (TMA type); ---Part 39.Sectional Specification for CQM Series Quick Lock RF Connectors; ---Part 40.2.4 series radio frequency connector sub-specification; ---Part 41.Sectional Specification for CQA Series Quick Lock RF Connectors; ---Part 42.Sectional Specification for CQN Series Quick Lock RF Connectors; ---Part 43.Sectional specification for RBMA series blind-mate radio frequency coaxial connectors; ---Part 44.Sectional specification for SMP series push-in radio frequency coaxial connectors; ---Part 45.Sectional Specification for SQMA Series Quick Lock RF Coaxial Connectors; ---Part 47.Sectional specification for plug-in radio frequency coaxial connectors for Fquick series 75Ω cable distribution systems; ---Part 48.BMP series blind-mate radio frequency coaxial connector sub-specification; ---Part 49.SMAA series radio frequency coaxial connector sub-specification; ---Part 58.Sectional specification for SBMA series blind-mate radio frequency coaxial connectors; ---Part 101.Sectional specification for MMCX series radio frequency coaxial connectors; ---Part.201.Electrical test method reflection coefficient and voltage standing wave ratio; --- Part 202.Electrical test method insertion loss. This part is Part 41 of GB/T 11313. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the redrafting method to refer to IEC 61169-41.2011 "Radio Frequency Connector Part 41.CQA Series Quick Locking Compilation of "Specifications for Frequency Connectors", and the degree of consistency with IEC 61169-41.2011 is non-equivalent. The main differences between this part and IEC 61169-41.2011 are as follows. ---Regulate the statement expression in the scope; --- Make drawing and drawing modifications according to the new drawing and dimensioning requirements (see 3.1.1, 3.1.2, 3.3.1, 3.3.2); ---IEC 61169-41.2011 table 1 "pin connector size" in the "w" value size optimization, from "20 ° minimum" to "20 ° (Nominal value)” (see Table 1); ---IEC 61169-41.2011 in Table 3 and Table 4 in the standard regulation B expression according to the tolerance expression method (see Table 3 and Table 4); ---IEC 61169-41.2011 table 5 "pin connector size" omission to write the angle "n" column, this part adds the angle The size of "n" has been optimized and the size of "w" has been optimized from "20°minimum value" to "20°(nominal value)" (see Table 5); ---IEC 61169-41.2011 in Table 6 "Note 4.When mated with a pin with a diameter of ϕ0.914mm±0.0025mm" In the case of editorial errors, this part was revised to "When mating with a pin with a diameter of ϕ0.90mm~ϕ0.927mm" (see Table 6); ---The content of Chapter 5 and other standards are unified and standardized. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part is under the jurisdiction of the National Standardization Technical Committee for High-frequency Cables and Connectors for Electronic Equipment (SAC/TC190). This section was drafted by. AVIC Fushida Technology Co., Ltd., China Electronics Standardization Institute. The main drafters of this section. Zhou Cui, Yang Qiuli, Wu Xiangwen, Wu Zhengping. RF connector Part 41.CQA Series Quick Lock RF Connector sub-specification

1 Scope

This part of GB/T 11313 is the sub-specification of GB/T 11313.1-2013.This part specifies the CQA series of fast locking radio frequency Connector mating interface and standard regulations, quality assessment procedures, detailed specification development guidelines, and details of accessories interchangeable with SMA connectors Small size (see Appendix A). This part is suitable for applications with a nominal impedance of 50Ω, which are used in microwave communication, wireless transmission and other fields, and are connected to radio frequency cables or microstrips. Etc., CQA series quick-locking RF connectors with operating frequency up to 18GHz. Note. The original size of this part is in millimeters, and all the graphic structures without dimensions are for reference only.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 11313.1-2013 Radio Frequency Connector Part 1.General Specification General Requirements and Test Methods (IEC 61169-1. 1998, IDT)

3 Mating interface and standard gauge

3.1 Universal connector size-level 2 3.1.1 Pin connector The pin connector interface is shown in Figure 1, and the dimensions are shown in Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11313.41-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11313.41-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11313.41-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11313.41-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.