Path: Home > GB/T > Page726 > GB/T 10960-2025 Home > Standard_List > GB/T > Page726 > GB/T 10960-2025

GB/T 10960-2025 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10960-2025: Single blade stroke circular sawing machines - Vocabulary and accuracy

GB/T 10960: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 10960-2025	English	279	Add to Cart	3 days [Need to translate]	Single blade stroke circular sawing machines - Vocabulary and accuracy		GB/T 10960-2025
GB/T 10960-2005	English	314	Add to Cart	3 days [Need to translate]	Woodworking machines -- Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels -- Nomenclature and acceptance conditions	Valid	GB/T 10960-2005
GB/T 10960-1989	English	239	Add to Cart	2 days [Need to translate]	Woodworking machines--Single blade stroke circular sawing machines--Accuracy tests	Obsolete	GB/T 10960-1989

Basic data

Standard ID	GB/T 10960-2025 (GB/T10960-2025)
Description (Translated English)	Single blade stroke circular sawing machines - Vocabulary and accuracy
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J65
Classification of International Standard	79.120.10
Word Count Estimation	14,112
Date of Issue	2025-10-31
Date of Implementation	2026-05-01
Older Standard (superseded by this standard)	GB/T 10960-2005
Issuing agency(ies)	State Administration for Market Regulation and Standardization Administration of China

GB/T 10960-2025: Single blade stroke circular sawing machines - Vocabulary and accuracy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 79.120.10 CCSJ65 National Standards of the People's Republic of China Replaces GB/T 10960-2005 Terminology and Precision of Reciprocating Woodworking Saws Published on 2025-10-31 Implemented on May 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4 General Requirements 3 5.Geometric accuracy inspection 3 Index 6 Figure 1.Example of a reciprocating woodworking saw. (Figure 2) Table 1 Geometric Accuracy Inspection 3

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document supersedes GB/T 10960-2005 "Terminology and Precision of Reciprocating Saw Machines for Woodworking Machine Tools", and is consistent with GB/T 10960- Compared to.2005, aside from structural adjustments and editorial changes, the main technical changes are as follows. ---The normative references have been changed (see 4.2, 4.7 and Table 1; 3.2, 3.7 and Table 2 in the.2005 edition); ---Change "Terminology" to "Terms and Definitions", and modify the example diagram and related technical content of the reciprocating woodworking saw machine (see page). Chapter 3 (Chapter 4 in the.2005 edition); ---The "Brief Description" section has been changed to "General Requirements," and the relevant technical content has been modified (see Chapter 4, Chapter 3 of the.2005 edition); ---The inspection methods in the geometric accuracy inspection items have been changed (see Chapter 5, Chapter 5 of the.2005 edition); ---The work accuracy check has been removed (see 5.2 in the.2005 edition). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee on Standardization of Woodworking Machine Tools and Cutting Tools (SAC/TC84). This document was drafted by. Fujian Provincial Academy of Mechanical Sciences, Nanxing Equipment (Shaoguan) Co., Ltd., and Fujian Deli Electromechanical Co., Ltd. Guangdong Product Quality Supervision and Inspection Institute and Guangdong Shunde Changsheng Machinery Manufacturing Co., Ltd. The main drafters of this document are. Wang Heping, Xiao Zhiqun, Zhou Fuliang, Yin Zhihong, and Wang Xiaolin. This document was first published in 1989, revised for the first time in.2005, and this is the second revision. Terminology and Precision of Reciprocating Woodworking Saws

1 Scope

This document defines the terminology for reciprocating woodworking saws and their main components, specifies geometric accuracy inspection and corresponding tolerances, and describes... The corresponding experimental methods are described. This document applies to the precision inspection of general-purpose, ordinary-precision reciprocating woodworking saw blades. This document is not applicable to operational tests of reciprocating woodworking saws (such as tests for vibration, abnormal noise, and component creep). It is suitable for the characteristic inspection of machine tools (such as speed, feed rate, etc.).

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 17421.1-2023 General Rules for Machine Tool Inspection - Part 1.Geometric Accuracy of Machine Tools under No-Load or Quasi-Static Conditions

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 A sawing machine with a reciprocating saw head used for sawing large-format engineered wood panels. Note 1.Hereinafter referred to as "machine tool". Note 2.The main components of the machine tool and their names are shown in Figure 1. 3.2 swinghead A power head equipped with a circular saw blade that can be moved or rotated. 3.3 Back workbench outfeedtable The worktable from which the workpiece is output after processing. 3.4 Bed frame framework A frame structure part on a woodworking machine tool that performs or carries out its main functions or main mutual movements. 3.5 workbench table A component with a working plane for supporting and clamping workpieces. 3.6 front workbench infeedtable Input the workpiece into the processing table.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10960-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10960-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10960-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10960-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10960-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10960-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.