|
US$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10671-2023: Test method for specific optical density of smoke generated by solid materials
Status: Valid GB/T 10671: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10671-2023 | English | 349 |
Add to Cart
|
4 days [Need to translate]
|
Test method for specific optical density of smoke generated by solid materials
| Valid |
GB/T 10671-2023
|
| GB/T 10671-2008 | English | 719 |
Add to Cart
|
4 days [Need to translate]
|
Test method for specific optical density of smoke generated by solid materials
| Obsolete |
GB/T 10671-2008
|
| GB/T 10671-1989 | English | 719 |
Add to Cart
|
5 days [Need to translate]
|
Test method for specific optical density of smoke generated by solid materials
| Obsolete |
GB/T 10671-1989
|
PDF similar to GB/T 10671-2023
Basic data | Standard ID | GB/T 10671-2023 (GB/T10671-2023) | | Description (Translated English) | Test method for specific optical density of smoke generated by solid materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U07 | | Classification of International Standard | 47.020.05 | | Word Count Estimation | 18,175 | | Date of Issue | 2023-08-06 | | Date of Implementation | 2024-03-01 | | Older Standard (superseded by this standard) | GB/T 10671-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 10671-2023: Test method for specific optical density of smoke generated by solid materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 47.020.05
CCSU07
National Standards of People's Republic of China
Replace GB/T 10671-2008
Test method for specific optical density of smoke produced by solid materials
Published on 2023-08-06
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document replaces GB/T 10671-2008 "Test method for specific optical density of smoke produced by solid materials" and is consistent with GB/T 10671-2008.
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Added types of applicable materials (see Chapter 1);
b) Added the term and definition of “smoke darkening index” (see 3.7);
c) Added the test requirement that the irradiance is 50kW/m2, and changed the lower limit of the total number of samples from 6 to 9 (see 7.2.2);
d) The order of preparation before the test was adjusted, the radiation furnace was changed to a radiation cone, the content related to the light transmittance meter was deleted, and the air tightness was increased
Inspection steps (see 8.1,.2008 version of 8.1);
e) The comparison of light transmittance and specific optical density has been deleted (see Appendix B of the.2008 version).
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and coordinated by the National Ocean Ship Standardization Technical Committee (SAC/TC12).
This document was drafted by. China Shipbuilding Industry Corporation No. 725 Research Institute, Qingdao Shuangrui Marine Environmental Engineering Co., Ltd.
The main drafters of this document. Fan Ningbo, Luo Wen, Wang Wenlong, Wang Fengling, Qiao Dongping, Ren Weiwei, Wang Yudong, Wang Tingyong, and Wang Xiaohua.
This document was first published in 1989, revised for the first time in.2008, and this is the second revision.
Test method for specific optical density of smoke produced by solid materials
1 Scope
This document specifies the principles, test equipment, specimens, test procedures, evaluation and calculation of test results for the specific optical density of smoke produced by solid materials.
and test reports.
This document is applicable to composite materials, rubber, foam, coatings, adhesives, thin materials, insulation under flameless mode or flame mode conditions.
Test of the specific optical density of smoke produced by solid materials such as wires.
2 Normative reference documents
This document has no normative references.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
light transmittance lighttransmittance
The percentage of the ratio of transmitted light flux (F) to incident light flux (F0).
3.2
In a test chamber of a certain volume, during the process of burning the sample to produce smoke, the degree of light attenuation after passing through the smoke layer is measured, and the derivation is derived
corresponding optical density.
Note. A measure of smoke produced by burning materials, also known as smoke density.
3.3
The specific optical density when the light transmittance is minimum during the test.
Note. It can also be called the maximum smoke density.
3.4
Specific optical density when the light transmittance is 75%.
3.5
Flameless modenoflamingexposure
Use a radiation cone to heat the vertically mounted specimen surface with an average irradiance of 25kW/m2 or 50kW/m2.
3.6
flame mode flamingexposure
Based on the flameless mode, a burner is installed in front of the sample so that the flame directly burns the sample.
3.7
The comprehensive index of the total amount of smoke and the smoke production rate when the critical specific optical density is reached.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10671-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10671-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10671-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10671-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 10671-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10671-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|