|
US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10599-2023: Multi-rope friction hoist
Status: Valid GB/T 10599: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10599-2023 | English | 289 |
Add to Cart
|
3 days [Need to translate]
|
Multi-rope friction hoist
| Valid |
GB/T 10599-2023
|
| GB/T 10599-2010 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Multi-rope mining friction hoist
| Obsolete |
GB/T 10599-2010
|
| GB/T 10599-1998 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Multi-rope mining friction hoist
| Obsolete |
GB/T 10599-1998
|
| GB 10599-1989 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Multi-rope mining friction hoist
| Obsolete |
GB 10599-1989
|
PDF similar to GB/T 10599-2023
Basic data | Standard ID | GB/T 10599-2023 (GB/T10599-2023) | | Description (Translated English) | Multi-rope friction hoist | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D93 | | Classification of International Standard | 73.100.40 | | Word Count Estimation | 14,154 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-07-01 | | Older Standard (superseded by this standard) | GB/T 10599-2010 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 10599-2023: Multi-rope friction hoist---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73:100:40
CCSD93
National Standards of People's Republic of China
Replace GB/T 10599-2010
Multi-rope friction hoist
Published on 2023-12-28
2024-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Type and basic parameters 2
5 Technical requirements 5
5:1 General requirements 5
5:2 Parts requirements 5
5:2:1 Spindle device 5
5:2:2 Disc brake 6
5:2:3 Reducer 6
5:2:4 Hydraulic station 6
5:2:5 Depth indicator system 7
5:2:6 Guide wheel and sheave device 7
5:2:7 Electronic control system 7
5:3 Security Protection 7
5:4 Direct-coupled electric motor hoist 8
5:5 Product complete supply scope 8
6 Test methods 8
7 Inspection Rules 9
7:1 Inspection classification 9
7:2 Factory inspection 10
7:3 Type inspection 10
8 Marking, packaging, transportation, storage and maintenance 10
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB/T 10599-2010 "Multi-rope friction hoist": Compared with GB/T 10599-2010, except for structural adjustment and
In addition to editorial changes, the main technical changes are as follows:
a) Changed the product model compilation method (see 4:2, 3:2 of the:2010 edition);
b) The main technical parameters of the product have been changed (see 4:3, 3:3 of the:2010 version);
c) Changed the technical requirements for some parts and components (see Chapter 5, Chapter 4 of the:2010 edition);
d) The product test method has been changed (see Chapter 6, Chapter 5 of the:2010 edition);
e) Product inspection rules have been changed (see Chapter 7, Chapter 6 of the:2010 edition);
f) The requirements for product marking, packaging, transportation, storage and maintenance have been changed (see Chapter 8, Chapter 7 of the:2010 edition):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Mining Machinery Standardization Technical Committee (SAC/TC88):
This document was drafted by: Luoyang Mining Machinery Engineering Design and Research Institute Co:, Ltd:, CITIC Heavy Machinery Co:, Ltd:, Shanxi
Xinfusheng Machinery Manufacturing Co:, Ltd:, Shaanxi Mining Equipment Inspection and Inspection Co:, Ltd:, Jinzhou Mining Machinery (Group) Co:, Ltd:, Shandong Taishan
Tiandun Mining Machinery Co:, Ltd:, Luoyang Baikete Technology Development Co:, Ltd:, Luoyang Weka Mining Machinery Equipment Co:, Ltd:, He
Bi Wanfeng Mining Machinery Manufacturing Co:, Ltd:, Yanchang Petroleum Balasu Coal Co:, Ltd:
The main drafters of this document: Qu Tie, Xu Yongfu, Du Bo, Zhang Lanjun, Nie Yong, Wang Shuang, Hu Xiuhai, Zhang Jiayi, Liu Kai, Niu Guoqiang, Hu Xilei,
Sui Shun, Liang Guanying, Kou Lei, Gao Zhikang, Liu Tongxin, Li Yuhui, Guo Kongfei:
This document was first published in 1989, revised for the first time in:1998, revised for the second time in:2010, and this is the third revision:
Multi-rope friction hoist
1 Scope
This document specifies the type, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, and transportation of multi-rope friction hoists:
transportation, storage and maintenance:
This document is suitable for installation in vertical shafts of coal mines, metal mines, and non-metal mines, for lifting people and objects in environments without explosive gases and dust:
Multi-rope friction hoist for materials and equipment:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 191 Packaging, storage and transportation pictorial mark
GB/T 4879 Anti-rust packaging
GB/T 8923:1-2011 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 1: Uncoated
The corrosion grade and treatment grade of the steel surface and the steel surface after the original coating has been completely removed
GB/T 13306 Signage
GB/T 13325 Basic criteria for measuring noise radiated by machines and equipment at the operator's position (engineering level)
GB/T 11345-2023 Ultrasonic testing technology, testing levels and assessment for non-destructive testing of welds
GB/T 13384 General technical conditions for mechanical and electrical product packaging
GB 16423 Safety regulations for metal and non-metal mines
GB :20181 Safety requirements for mine hoists and mining hoisting winches
GB/T 25706 Mining machinery product model compilation method
GB/T 29712-2023 Non-destructive testing of welds and ultrasonic testing acceptance levels
GB/T 37400:1-2019 General technical conditions for heavy machinery Part 1: Product inspection
GB/T 37400:12 General technical conditions for heavy machinery Part 12: Coating
JB/T 1581 Ultrasonic testing method for steam turbine, turbine generator rotor and main shaft forgings
JB/T 3277 Mine hoist and mining hoist winch hydraulic station
JB/T 3721 Disc brake brake shoe for mine hoist and mine hoisting winch
JB/T 3812 Disc springs for disc brakes of mine hoists and mining winches
JB/T 6754:2 DC drive mine hoist electrical control equipment Part 2 Thyristor electrical control equipment
JB/T 8519 Mine hoist and mining hoisting winch disc brake
JB/T 9043 Planetary gear reducer for mine hoist
JB/T 10347 Friction lining of friction hoist
JB/T 12808 Heavy-duty planetary gear reducer for mining
JB/T 13193 Technical conditions for low-voltage variable frequency drive electronic control equipment for mine hoists and mine hoisting winches
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10599-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10599-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10599-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10599-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 10599-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10599-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|