GB/T 15545-2020 PDF English
Search result: GB/T 15545-2020_English: PDF (GB/T15545-2020)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 15545-2020 | English | 80 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
General rules for packing, marking, transport, storage and quality certificates of unshaped refractory
| Valid |
| GB/T 15545-1995 | English | 199 |
Add to Cart
|
2 days
|
Unshaped refractory. Packing, marking, transportation and storage
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 15545-2020 Related standards: GB/T 15545-2020
PDF Preview: GB/T 15545-2020
GB/T 15545-2020: PDF in English (GBT 15545-2020) GB/T 15545-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 81.080
Q 40
Replacing GB/T 15545-1995
General rules for packing, marking, transport, storage
and quality certificates of unshaped refractory
ISSUED ON: JUNE 02, 2020
IMPLEMENTED ON: APRIL 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Packing ... 5
5 Marking ... 7
6 Transport ... 8
7 Storage ... 8
8 Quality certificate ... 8
General rules for packing, marking, transport, storage
and quality certificates of unshaped refractory
1 Scope
This Standard specifies the packing, marking, transport, storage and quality
certificates of unshaped refractory (hereinafter referred to as products).
This Standard applies to unshaped refractory.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 191, Packaging - Pictorial marking for handling of goods
GB/T 1413, Series 1 freight containers - Classification, dimensions and
ratings
GB/T 2934, General-purpose flat pallets for through transit of goods -
Principal dimensions and tolerances
GB/T 3830, Calendered film (sheet) from flexible PVC
GB/T 4122.1, Packaging terms - Part 1: Basic
GB/T 4892, Dimensions of rigid rectangular packages - Transport packages
GB/T 4995, General-purpose flat pallets for through transit of goods -
Performance requirements and selection of tests
GB/T 6388, Transport package shipping mark
GB/T 6543, Single and double corrugated boxes for transport packages
GB/T 6544, Corrugated fiberboard
GB/T 9174, General specification for transport packages of general cargo
GB/T 10454, Flexible freight container
Buckets
Metal
bucket
a) The bucket shall be round, free of obvious
defects such as out-of-round, concave,
deflection; the bucket body shall be
smooth, free of burrs and mechanical
damage;
b) Repair welding of the straight seam of the
barrel is not allowed;
c) The bucket shall clean, free of rust, slag
and other impurities. Lining insulation
material;
d) The paint film on the surface of the bucket
shall be smooth and even;
e) The bucket mouth piece assembly is
matched; it does not leak and meets the
requirements that are determined by other
parties
25/40/50/
100/200
Plywood
(fiberboard)
bucket
It shall comply with GB/T 9174 20/25/40/ 50/100
Hard
plastic
bucket
It shall comply with GB/T 9174 20/25/40/ 50/100
Boxes Corrugated Box
a) The dimensions of corrugated box shall
meet the requirements of GB/T 6543 and
GB/T 6544;
b) Lined with plastic film or other anti-leakage
materials;
c) After sealing the box, use nylon band or
steel band to tie it firmly
Assembly
packaging
Wooden
box (fully
enclosed
wooden
box, open
crate)
a) The box board shall be free of obvious
burrs and holes. The defects of the wood
itself must not affect the structural strength
of the box board;
b) The four corners of the wooden box shall
be aligned vertically; the thickness and
width of the box board and box stop shall
be determined according to the weight of
the product; but the thickness shall not be
less than 18 mm and the width shall not be
less than 70 mm;
c) The box size shall be selected according to
GB/T 4892
1 000/1 200
e) date of manufacture and batch number;
f) validity period and storage conditions;
g) rain and moisture proof markings;
h) others.
5.3 The product packing, storage and transport markings shall comply with the
provisions of GB/T 191.
5.4 The product transport packing receipt and delivery marking shall comply
with the provisions of GB/T 6388.
6 Transport
6.1 Before the transport, the package shall be verified to be complete; the
internal components shall not leak, not damaged; the seal shall be intact.
6.2 The transport machine shall be safe, firm and clean, and shall be equipped
with rain and moisture-proof facilities.
6.3 Handle with care and keep the package intact during transport.
6.4 Packages which are transported over long distances can be transported in
containers.
7 Storage
7.1 Packages should be stored in a warehouse that is protected from rain,
moisture, sun and fire.
7.2 Packages shall be stacked and marked separately.
8 Quality certificate
Each batch of products shall be accompanied by a quality certificate, which
indicates:
a) name of the manufacturer;
b) name of the buyer;
c) product name, designation grade and batch number;
d) quality inspection special seal and issuer;
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|