|
US$94.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10183.4-2010: Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib Cranes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10183.4-2010 | English | 94 |
Add to Cart
|
3 days [Need to translate]
|
Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib Cranes
| Valid |
GB/T 10183.4-2010
|
PDF similar to GB/T 10183.4-2010
Basic data | Standard ID | GB/T 10183.4-2010 (GB/T10183.4-2010) | | Description (Translated English) | Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib Cranes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 5,551 | | Date of Issue | 2011-01-10 | | Date of Implementation | 2011-06-01 | | Quoted Standard | GB/T 6974.1; GB/T 10183.1-2010 | | Adopted Standard | ISO 12488-4-2004, IDT | | Regulation (derived from) | National Standard Approval Announcement 2011 No.1 (Total No.166) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the GB/T 6974. 1 define their tolerance jib crane tracks. GB/T 10183 does not apply to this part of the curve in orbit jib crane. | GB/T 10183.4-2010: Cranes -- Tolerances for wheels and travel and traversing tracks -- Part 4: Jib Cranes
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Cranes Tolerances for wheels and travel and traversing tracks Part 4. Jib Cranes
ICS 53.020.20
J80
National Standards of People's Republic of China
Cranes and crane wheels and trolley tracks tolerance
Part 4. jib crane
Part 4. JibCranes
(ISO 12488-4.2004, IDT)
Issued on. 2011-01-10
2011-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 10183 "Cranes wheel and carts and trolley tracks tolerance" is divided into two parts.
--- Part 1. General;
--- Part 4. jib crane.
This section GB/T Part of 410,183.
This part identical with ISO 12488-4.2004 "Cranes wheel and carts and trolley orbit tolerances - Part 4. set up arm
Heavy machine "(in English).
This section is equivalent translation ISO 12488-4.2004.
For ease of use, this section made the following editorial changes.
a) "This part of ISO 12488" be replaced by "GB/T 10183 in this section";
b) Delete the ISO 12488-4.2004 Foreword;
c) For ISO 12488-4.2004 international standard reference has been adopted as the equivalent of the standard with our standard replaces the corresponding
International standards.
The standard ISO 12488-4.2004 clerical error made in the correction, such as 6.1 "Tables 3 to 8" to "Tables 2 to 7"; 6.2
"Tables 5 and 6" to "Tables 4 and 5."
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is responsible for drafting unit. DHI DCW Group Co., Ltd., Beijing Institute of lifting the transport machinery design.
Participated in the drafting of this section. Dalian University of Technology.
The main drafters of this section. Lv Xinmin, Guipei Kang Ho uranium, Du Changshun, Teng Ru people.
Introduction
GB/T 10183 provisions of this section reflect contemporary crane design level requirements are given guidelines and design criteria. The
Guidelines provide, reflecting the guarantee to meet the basic safety requirements and members have ample experience in the successful design life. Deviation from this
These guidelines will generally lead to an increased risk or shortened life expectancy. But it should be recognized that the use of technical innovation and new materials, etc. may produce new
The plan will eventually receive the same or higher level of security and durability.
Cranes and crane wheels and trolley tracks tolerance
Part 4. jib crane
1 Scope
GB/T 10183 provisions of this section by the GB/T 6974.1 defined jib crane and tolerance track.
GB/T 10183 is not applicable to this part of the curve in the orbit jib crane.
2 Normative references
The following documents contain provisions which, through GB/T 10183 reference in this text, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 6974.1 crane terminology - Part 1. General terms (GB/T 6974.1-2008, ISO 4306-1.2007,
IDT)
GB/T 10183.1-2010 crane and trolley wheels and carts orbit tolerances - Part 1. General (ISO 12488-
1.2005, IDT)
3 Terms and Definitions
Terms and definitions GB/T 10183.1 provisions applicable to this section.
4 Symbol
Symbol GB/T 10183.1 provisions applicable to this section.
Tolerance grade 5
Jib crane rigid support structure should be in GB/T 10183.1-2010 Class 2 tolerance design.
Hinged mast crane support structure should be GB/T 10183.1-2010 in the Class 3 tolerance design.
Note. Other tolerance levels of use can be determined according to the manufacturer and the purchaser agreement.
6 Tolerance
6.1 General
Tolerance levels given by the GB/T 10183.1-2010 in Tables 2 to 7.
Over 6.2 wheel structure
Jib cranes typically have multiple rounds of structure, for example, with 2-16 sets of wheels by frame, and the upper portion of the balance beam balance beam and each corner
Phase structure of the connection. Use GB/T 10183.1-2010 tolerance values \u200b\u200bof Tables 4 and 5 below, including the car, balance beam and doors
Frame structure associated tolerance values. The following basic tolerance should be considered.
A --- for the "same row" all the wheels;
Δe --- for within the group as well as from e wheel trolley or the balance beam in the all wheel base distance e;
Δhr --- the average for the bottom surface of the wheel, all wheels are cumulative vertical tolerance or trolley or the balance beam and the mast is connected.
Symbol Φk, Φr, τk, τr can be used for all the wheels, and the average cumulative tolerances and door frame connected to the trolley or balance beam.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10183.4-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 10183.4-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10183.4-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10183.4-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|