|
US$1479.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10180-2017: Thermal performance test code for industrial boilers
Status: Valid GB/T 10180: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10180-2017 | English | 1479 |
Add to Cart
|
10 days [Need to translate]
|
Thermal performance test code for industrial boilers
| Valid |
GB/T 10180-2017
|
| GB/T 10180-2003 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Thermal performance test code for industrial boilers
| Obsolete |
GB/T 10180-2003
|
| GB 10180-1988 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Test code for industrial boiler
| Obsolete |
GB 10180-1988
|
PDF Samples
Basic data | Standard ID | GB/T 10180-2017 (GB/T10180-2017) | | Description (Translated English) | Thermal performance test code for industrial boilers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J98 | | Classification of International Standard | 27.060.30 | | Word Count Estimation | 74,765 | | Date of Issue | 2017-07-12 | | Date of Implementation | 2018-02-01 | | Older Standard (superseded by this standard) | GB/T 10180-2003 | | Quoted Standard | GB/T 211; GB/T 212; GB/T 213; GB/T 214; GB/T 260; GB/T 384; GB/T 474; GB/T 476; GB/T 508; GB/T 1884; GB/T 2900.48; GB/T 6284; GB/T 8174; GB/T 10184; GB/T 10410; GB 13271; GB/T 13610; GB/T 19227; GB 23971; GB/T 24747; GB/T 25214; GB/T 28730; GB/T 28731 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the terms and definitions in the thermal performance test of industrial boilers, symbols and units, general rules, test preparation, test requirements, measurement items and test instruments, test methods, boiler thermal efficiency calculations, and test reports. This standard is applicable to the thermal performance test of solid fuel boilers, liquid fuel boilers, gas fuel boilers and electric heating boilers whose rated pressure is less than 3.8 MPa, medium for water or liquid organic heat carrier. Oil field steam boiler, waste heat utilization device or equipment (except flue-type waste heat boiler), the steam pressure of not less than 3.8 MPa and the steam temperature of less than 450 �� can refer to the use of the boiler. | GB/T 10180-2017: Thermal performance test code for industrial boilers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermal performance test code for industrial boilers
ICS 27.060.30
J98
National Standards of People's Republic of China
Replacing GB/T 10180-2003
Industrial Boiler Thermal Performance Test Procedures
Published on.2017-07-12
2018-02-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Symbols and Units 3
5 General 11
6 Test preparation 14
7 Test Requirements 15
8 Measuring items and test instruments 17
9 Test methods 21
10 Calculation of boiler thermal efficiency 26
11 Test report 29
Appendix A (Informative Appendix) Flue Gas Condensation and Heat Recovery in Boiler Thermal Balance System Boundary
Boiler thermal efficiency calculation 30
Appendix B (Normative Appendix) Boiler Operation Test 33
Appendix C (Normative Appendix) Sampling and preparation of coal and pulverized coal 37
Appendix D (Normative Appendix) Determination of Equal Area of Grid Method and Determination of Representative Points 38
Appendix E (Normative Appendix) Use of the Aussie Analyzer 40
Appendix F (Normative) Measurement and Calculation of Heat Loss 42
Appendix G (normative) Saturated steam humidity and superheated steam salt content determination method 43
Appendix H (Informative Appendix) Main contents of industrial boiler thermal performance test report 47
Appendix I (Normative Appendix) Calculation of Thermal Efficiency of Circulating Fluidized Bed Boilers with Addition of Desulfurizers 61
Appendix J (informative annex) Average constant pressure heat capacity of flue gas, ash and air, relevant quantities of commonly used gases, and commonly used statutory measurements
Units and their translation 68
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 10180-2003 "Industrial Boiler Thermal Performance Test Procedures", compared with GB/T 10180-2003, except for
The major technical changes outside of this series are as follows.
--- Modify the scope (see Chapter 1, Chapter 1 of the.2003 edition);
--- Added and modified terms and definitions (see Chapter 3, Chapter 3 of the.2003 edition);
--- Added and modified symbols and units (see Chapter 4,.2003, Chapter 4);
--- Modify the method of determining the base temperature of the boiler in the styling test and acceptance test (see 5.7,.2003 version 7.10);
--- Modify the measurement accuracy of some instruments and equipment (see Table 6,.2003 version 9.4~9.8);
--- Modify the formula for calculating the thermal efficiency of the superheated steam boiler [see Equation (5), Equation (6), Equation (7),.2003, Equation (5), Equation (6)];
--- Modify the error provisions of the boiler thermal efficiency calculation results (see 10.1.2,.2003 version 9.3);
--- Modified sampling and preparation of coal and pulverized coal (see Appendix C, Appendix A of the.2003 edition);
--- Modify the use of the Austenitic analyzer (see Appendix E, Appendix C of the.2003 edition);
--- Modify the measurement and calculation of heat loss (see Appendix F, Appendix D of the.2003 edition);
--- Added boiler thermal balance system boundary map and related requirements for thermal performance test (see 5.1);
--- Increased the validity of the test data record requirements (see 5.8);
--- Increased thermal efficiency calculation method for multi-function boilers (see 10.2);
--- Added boiler thermal efficiency calculation method for adding desulfurizer (see Appendix I);
--- Increased boiler thermal efficiency calculation method for the occurrence of flue gas condensation and heat recovery in the boiler thermal balance system boundary (see attached
Record A);
--- Increased boiler operation test method (see Appendix B);
--- Increased the division of the grid area and the determination of representative points (see Appendix D);
--- Increased calculation of the thermal efficiency of circulating fluidized bed boilers with addition of desulfurizers (see Appendix I);
--- Deleted the indefinable content of light furnace walls, heavy light furnace walls, etc. (see 7.1.1 of the.2003 edition).
This standard is proposed and managed by the National Standardization Technical Committee for Boiler and Pressure Vessels (SAC/TC262).
This standard is drafted by. Shanghai Industrial Boiler Research Institute.
Participated in the drafting of this standard. Fujian Institute of Boiler and Pressure Vessel Inspection, Guangdong Special Equipment Inspection and Research Institute, Shanghai Special
Equipment Supervision and Inspection Technology Research Institute, Jianglian Heavy Industry Co., Ltd., Jiangsu Shuangliang Boiler Co., Ltd., Suzhou Hailu Heavy Industry Co., Ltd.
Secretary, Jinniu Co., Ltd., Nantong Wanda Boiler Co., Ltd., Dalian Boiler and Pressure Vessel Inspection and Research Institute, Qingdao Ebara Environmental Equipment Co., Ltd.
Limited Company, Taishan Group Co., Ltd., China Special Equipment Inspection and Research Institute, Tianjin Baocheng Machinery Manufacturing Co., Ltd., Wuxi Tineng
Boiler Co., Ltd.
The main drafters of this standard. Wang Shanwu, Zhang Yuanzhang, Li Yuesheng, Tong Qinghua, Lei Qinxiang, Pan Ruilin, Ding Jie, Xiao Xinfang, Xu Yuping,
Li Shengde, Yang Lin, Ye Hao, Guan Jian, Qiu Xingtong, Yu Mengquan, Li Chun, Meng Xiangjun, Xu Yongmin, Wang Huiyun, Zhou Donglei, Yin Huikun, Qi Guoli,
Li Yaorong, Zhu Yongzhong, Zhao Bo.
The previous versions of the standard replaced by this standard are.
--- GB/T 10180-1988, GB/T 10180-2003.
Industrial Boiler Thermal Performance Test Procedures
1 Scope
This standard specifies the terms and definitions, symbols and units, general rules, test preparations, and test requirements in the thermal performance test of industrial boilers.
Measurement items and test instrumentation, test methods, calculation of boiler thermal efficiency, and test report.
This standard applies to solid fuel boilers and liquid fuel boilers whose rated pressure is less than 3.8 MPa and whose medium is water or liquid organic heat carrier.
Thermal performance tests for furnaces, gas-fired boilers, and electric heating boilers.
Oilfield steam injection boiler, waste heat utilization device or equipment (excluding flue type waste heat boiler), steam pressure not less than 3.8MPa and steam temperature
The degree of less than 450 °C boiler can refer to use.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
Determination of total moisture in GB/T 211 coal
Industrial analysis method for GB/T 212 coal
GB/T 213 Coal Calorimetry Method
Determination of Total Sulfur in GB/T 214 Coal
GB/T 260 Petroleum Products Moisture Determination
GB/T 384 determination of calorific value of petroleum products
Preparation of GB/T 474 coal sample
Determination of Carbon and Hydrogen in GB/T 476 Coal
GB/T 508 ash determination of petroleum products
GB/T 1884 Laboratory determination of density of crude oil and liquid petroleum products (densitometer method)
GB/T 2900.48 Electrical terminology boiler
GB/T 3286 (all parts) Methods for chemical analysis of limestone and dolomite
GB/T 6284 General method for determination of moisture in chemical products Dry reduction method
Test and Evaluation of GB/T 8174 Equipment and Pipeline Thermal Insulation Effect
GB/T 10184 Power Station Boiler Performance Test Procedures
GB/T 10410 Gas and chromatographic analysis of major components of artificial gas and liquefied petroleum gas
GB 13271 Boiler Air Pollutant Emission Standard
GB/T 13610 Composition Analysis of Natural Gas Gas Chromatography
GB/T 19227 Determination of nitrogen in coal
GB 23971 Organic Heat Carrier
GB/T 24747 organic heat carrier safety technical conditions
GB/T 25214 Determination of Total Sulfur in Coal by Infrared Spectroscopy
GB/T 28730 solid biomass fuel sample preparation method
GB/T 28731 Solid Biomass Fuel Industry Analysis Method
GB/T 28732 method for determination of total sulfur in solid biomass fuel
GB/T 28733 Method for determination of total moisture of solid biomass fuel
GB/T 28734 Determination of hydrocarbons in solid biomass fuels
GB/T 30725 solid biomass fuel ash composition determination method
GB/T 30726 Solid Fuel Ash Fusion Method
GB/T 30727 Solid biomass fuel calorific value determination method
GB/T 30728 Determination of Nitrogen in Solid Biomass Fuels
GB/T 30732 Coal Industrial Analytical Instruments Method
GB/T 30733 Determination of carbon and hydrogen nitrogen in coal
CJ/T 313 Domestic Waste Sampling and Analysis Methods
DL/T 567.8 Fuel Test Method for Thermal Power Plants Determination of Fuel Calorific Value
DL/T 567.9 Fuel Test Method for Thermal Power Plant Fuel Element Analysis
NB/T 47034 Industrial Boiler Technical Conditions
NY/T 1879 Biosolids Solid Fuel Sampling Method
NY/T 1880 Biomass Solid Shaped Fuel Sample Preparation Method
NY/T 1881.1 Test Method for Biomass Solid Fuels Part 1. General Rules
NY/T 1881.2 Biomass Solid Forming Fuel Test Methods Part 2. Full Moisture
NY/T 1881.3 Test Methods for Biomass Solid Formed Fuels Part 3. General Analysis of Sample Moisture
NY/T 1881.4 Test Method for Biomass Solid Formed Fuels Part 4. Volatile Partitions
NY/T 1881.5 Test Method for Biomass Solid Fuels Part......
|