|
US$1079.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10107.1-2012: Cycloidal drives -- Part 1: Basic terminology
Status: Valid GB/T 10107.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10107.1-2012 | English | 1079 |
Add to Cart
|
7 days [Need to translate]
|
Cycloidal drives -- Part 1: Basic terminology
| Valid |
GB/T 10107.1-2012
|
| GB/T 10107.1-1988 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Basic terminology of cycloidal drives
| Obsolete |
GB/T 10107.1-1988
|
PDF similar to GB/T 10107.1-2012
Basic data | Standard ID | GB/T 10107.1-2012 (GB/T10107.1-2012) | | Description (Translated English) | Cycloidal drives -- Part 1: Basic terminology | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J19 | | Classification of International Standard | 21.120 | | Word Count Estimation | 49,460 | | Older Standard (superseded by this standard) | GB/T 10107.1-1988 | | Regulation (derived from) | National Standards Bulletin No. 24 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the cycloid gear, the gear and the planetary gear needle basic terminology and standard definition. GB/T 10107 This part applies cycloid planetary transmission. | GB/T 10107.1-2012: Cycloidal drives -- Part 1: Basic terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS21.120
J19
National Standards of People's Republic of China
Replacing GB/T 10107.1-1988
Cycloid drive - Part 1. Basic terminology
Cycloidaldrives-Part 1. Basicterminology
Issued on. 2013-03-01 2012-09-03 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Terms and definitions 1
3 cycloid [gear] round 18
4-pin [gear] round 32
5 cycloid planetary gear set 37
Index 40
Foreword
GB/T 10107 "cycloid planetary transmission" includes the following three parts.
--- Part 1. Basic terminology;
--- Part 2. graphical method;
--- Part 3. Symbols of geometrical data.
This is Part 1 GB/T 10107 in.
Rules in this section in accordance with GB/T 1.1-2009 given draft.
This Part replaces GB/T 10107.1-1988 "Cycloid drive basic terminology." This part of GB/T 10107.1-
Compared to 1988, in addition to editorial amendments, the main changes are the following.
--- Adding new terms and definitions (see 2.1.1.4, 2.1.1.5, 2.1.1.6, 2.4.2.5, 2.4.2.6, 5.1.2.2, 5.1.2.3);
--- Increased synonyms part of the term (see 2.1.3.5, 3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1,
4.3.2.1);
--- Complement and extend the definition of the term minority content (see 2.1.1.2, 2.1.1.3);
--- Adjusted increase in the content of Chapter 5;
--- Improvement of standards of the section, subsection titles (see 3.1, 3.1.1, 3.1.2, 4.1, 4.1.1);
--- Adjusted Synonyms part of the term (see 2.1.1, 2.1.1.3, 2.1.3.5, 2.4.2.2, 2.4.2.3, 2.4.2.4,
3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1, 4.3.2.1).
This section is proposed and managed by the China Machinery Industry Federation.
This part of the main drafting unit. Hebei University, Tianjin Petrochemical General Machinery Research Institute.
Participated in the drafting of this section. Tianjin reducer Plant Co., Ltd., Shanghai slowdown Machinery Co., Ltd., Jiangsu Stallone reducer shares
Parts Limited, Thai-reducer Co., Ltd., Shandong Obo reducer Ltd., Zhangjiagang Second Textile Machinery Co., Ltd.
The main drafters of this section. Dai Tianwei, Xuan Ping, Liu Zhixin, Ma Xiaojuan, Li Guoliang, Xu Qiguo.
This part of the standard replaces the previous editions are.
--- GB/T 10107.1-1988.
Cycloid drive - Part 1. Basic terminology
1 Scope
This section GB/T 10107 provisions of the basic terminology and standard definitions cycloidal gear and pin gear planetary drive.
This section GB/T 10107 applies to Cycloid Drive.
2 Terms and definitions
2.1
Kinematics defined kinematicdefinitions
2.1.1
Cycloidal gear and pin gear planetary transmission mechanism cycloidalgear, pinwheelandtheirplanetarygeardrivemech-
anisms
2.1.1.1
Cycloid [gear] round cycloidalgear
Tooth profile is accurate (or near) the cycloidal equidistant curved shape of the disc-shaped or annular gear (Figure 1, Figure 2).
figure 1
figure 2
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10107.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 10107.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10107.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10107.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 10107.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10107.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|