GB/T 4323-2017 PDF in English
GB/T 4323-2017 (GB/T4323-2017, GBT 4323-2017, GBT4323-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 4323-2017 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Pin coupling with elastic sleeve
| Valid |
| GB/T 4323-2002 | English | 479 |
Add to Cart
|
3 days
|
Pin coupling with elastic sleeve
| Obsolete |
| GB/T 4323-1984 | English | 439 |
Add to Cart
|
4 days
|
Pin coupling with elastic sleeve
| Obsolete |
Standards related to (historical): GB/T 4323-2017
PDF Preview
GB/T 4323-2017: PDF in English (GBT 4323-2017) NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.100.20 J 19
GB/T 4323-2017
Replacing GB/T 4323-2002
Pin coupling with elastic sleeve
Issued on. May 12, 2017 Implemented on. December 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Type, basic parameters and main dimensions ... 5
4 Marking method ... 9
5 Technical requirements ... 10
6 Inspection rules ... 11
Appendix A ... 12
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 4323-2002 “Pin coupling with elastic sleeve”. Compared with GB/T 4323-2002, except for editorial revision, the main technical changes are as follows.
-Removed the side view drawing and parts number in Figure 1, Figure 2 and added essential dimensions;
- Made major adjustments on Table 2, Table 3 and added essential values;
-Deleted GB/T 93, GB/T 531, GB/T 1693, GB/T 3512 and GB/T 6557 in Normative references;
- Removed Figures 3 ~ Figure 5 and Table 4;
- Changed 5.2 and Table 5 in the technical requirements to 3.3 and Table 3, integrated the technical requirement in Chapter 3, and amended the contents of Table 3;
- Removed Chapter 6 "Test methods".
This Standard was proposed by and shall be under the jurisdiction of the National Technical Committee for Standardization of Machine Shafts and Accessories (SAC/TC 109).
Drafting organizations of this Standard. Leqing Coupling Factory, China Machinery Productivity Promotion Center, Taiyuan Heavy Industry Co., Ltd., Zhejiang Xipuli Seal Technology Co., Ltd., Wuhan Zhengtong Transmission Technology Co., Ltd.
Main drafters of this Standard. Huang Xiaojing, Ming Cuixin, Wang Xiaoling, Xi Weimin, Yu Xiaosuo, Li Haibin.
The previous releases of the standards replaced by this standard are.
-- GB/T 4323-1984, GB/T 4323-2002.
Pin coupling with elastic sleeve
1 Scope
This Standard specifies the structural types, basic parameters, main dimensions, marking method, technical requirements and inspection rules of the standard LT type and LTZ type elastic sleeve pin couplings (hereinafter referred to as the coupling).
This Standard is applicable to the driving shaft system connecting the two coaxial lines with transmission nominal torque of 16N·m~ 22 400N·m at working temperature of 30°C~ +100°C, and has the function of compensating the relative displacement of the two axes and buffering the axes.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 528 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain
properties
GB/T 529 Rubber, vulcanized or thermoplastic. Determination of tear strength (Trouser,
angle and crescent test pieces)
GB/T 531.1 Rubber, vulcanized or thermoplastic. Determination of indentation
hardness. Part 1. Durometer method (Shore hardness)
GB/T 699 Quality carbon structure steels
GB/T 1681 Rubber. Determination of rebound resilience of vulcanizates
GB/T 1682 Rubber, vulcanized. Determination of low-temperature brittleness. Single
test piece method
GB/T 1689 Rubber vulcanized. Determination of abrasion resistance (Akron machine)
GB/T 1690 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
GB/T 3098.2 Mechanical properties of fasteners. Nuts
GB/T 3852 Types and dimensions for coupling bores and their connection
5.6 The working surface of the brake wheel shall be quenched. The hardness is 40 HRC~ 50 HRC, and the depth of effective hardened layer is 2mm~ 3mm.
5.7 The heat treatment hardness of the pin is 241 HBW ~ 269 HBW.
5.8 the maximum torque transmitted by the instantaneous overload of the coupling is twice that of the allowable torque.
5.9 For selection of coupling, see Appendix A.
6 Inspection rules
6.1 Factory inspection
6.1.1 Each set of couplings shall be inspected in accordance with the requirements of Chapter 3 and the drawings before exiting the factory.
6.1.2 Each set of couplings shall be inspected and qualified by the manufacturer's product quality inspection department. The product quality certificate shall be attached before exiting the factory.
6.2 Type inspection
6.2.1 Inspection requirements
Type inspection shall be carried out when it is the first time of production, there is a major change in the product structure, material and process, or so required by the contract.
6.2.2 Inspection items
The inspection items shall be in accordance with 6.1.1.
6.2.3 Sampling and batch rules
When the first output of the coupling is less than 10 sets, pick 1 set for spot check; when 10~ 50 sets, spot check 2 sets; when more than 50 sets, check 3 sets. If it is not qualified for the first inspection, double the number of sampling for a second spot check; if it fails again, check the whole batch.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|