|
US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10067.411-2014: Basic specifications for electroheat installations -- Part 411: Electroheat bath furnace
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10067.411-2014 | English | 419 |
Add to Cart
|
3 days [Need to translate]
|
Basic specifications for electroheat installations -- Part 411: Electroheat bath furnace
| Valid |
GB/T 10067.411-2014
|
PDF similar to GB/T 10067.411-2014
Basic data | Standard ID | GB/T 10067.411-2014 (GB/T10067.411-2014) | | Description (Translated English) | Basic specifications for electroheat installations -- Part 411: Electroheat bath furnace | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K61 | | Classification of International Standard | 25.180.10 | | Word Count Estimation | 18,160 | | Date of Issue | 12/5/2014 | | Date of Implementation | 4/16/2015 | | Quoted Standard | GB/T 10066.1-2004; GB/T 10066.4-2004; GB/T 10067.1-2005; GB/T 10067.4-2005; JB/T 2379-1993; JB/T 9691-1999 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2014 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the various types of electric bath furnace (hereinafter referred to as bath furnace) general technical requirements, test methods, inspection rules and technical grade products, signs, packaging, transportation, storage, and orderi | GB/T 10067.411-2014: Basic specifications for electroheat installations -- Part 411: Electroheat bath furnace
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Basic specifications for electroheat installations Part 411. Electroheat bath furnace
ICS 25.180.10
K61
National Standards of People's Republic of China
Electric equipment basic technical conditions
Part 411. Electric bath furnace
Part 411. Electroheatbathfurnace
Issued on. 2014-12-05
2015-04-16 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Product Category 2
4.1 2 varieties and specifications
4.2 Part 2
4.3 The main parameters 3
5 Technical requirements 3
5.1 General Requirements 3
5.2 pairs of complementary design and manufacture of claim 3
5.3 Performance Requirements 7
5.4 sets requirements 9
6 Test methods 9
6.1 General provisions 9
Measuring 6.2 air furnace heating time of 10
6.3 rated power measurement 10
Measuring 6.4 degrees of temperature uniformity 10
Surface temperature measurement 6.5 10
Measuring 6.6 air furnace loss 11
Three-phase current unbalance measuring 6.7 degrees 11
7 inspection rules and technical grade 11
8 signs, packaging, transportation and storage 12
9 Ordering and Delivery 13
Foreword
GB/T 10067 "Basic electric device technical conditions" existing 19 sections.
--- Part 1. Common part;
--- Part 2. Arc heating device;
--- Part 3. induction electric device;
--- Part 31. IF coreless induction furnace;
--- Part 32. voltage-frequency multi-station frequency coreless induction furnace complete sets of equipment;
--- Part 33. frequency coreless induction melting Tonglu;
--- Part 4. Indirect resistance furnaces;
--- Part 41. network with resistance heating unit;
--- Part 42. Push resistance heating unit;
--- Part 43. Forced convection Pit resistance furnace;
--- Part 44. Box-type resistance furnace;
--- Part 45. vacuum hardening furnace;
--- Part 46. Bell-type resistance furnace;
--- 47 parts. vacuum heat treatment and brazing furnace;
--- Part 48. Car-resistance furnace;
--- Part 49. Natural convection Pit resistance furnace;
--- Part 410. single crystal furnace;
--- Part 411. Electric bath furnace;
--- Part 5. High-frequency dielectric heating equipment.
We will continue to develop other parts as needed.
This section GB/T Part 41,110,067 should the GB/T Part 1 and Part 410 067 used in conjunction.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electric Equipment Industry Standardization Technical Committee (SAC/TC121) centralized.
This section is drafted. Xi'an Institute Ltd. furnace, furnace Metallurgical Engineering Technology Center, the State Quality Supervision and Inspection Center Furnace,
Shaanxi Province electric engineering and technology research center.
The main drafters of this section. Zhangshu Rong, Yuanfang Lan, Zhu Lin.
Electric equipment basic technical conditions
Part 411. Electric bath furnace
1 Scope
This section GB/T 10067 specifies the various types of electric heating bath furnace (hereinafter referred to as bath furnace) general technical requirements, test methods, test
Rules and technical grading, marking, packaging, transportation, storage, and ordering and delivery.
This section applies to the design required 4.1, 5.1 and 5.2, mainly used for metal parts subjected to heat treatment in a salt bath, oil bath or alkali bath
Electric heating bath furnace.
This section also applies to similar electric bath furnace, such as a metal bath furnace can also refer to this section otherwise.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 10066.1-2004 Test methods for electroheat installations - Part 1. General section
GB/T 10066.4-2004 Test methods for electric equipment - Part 4. Indirect resistance furnaces
GB/T 10067.1-2005 basic technical conditions for electric devices - Part 1. General section
GB/T 10067.4-2005 Electric equipment basic technical conditions - Part 4. Indirect resistance furnaces
JB/T 2379-1993 Metal tubular heating element
JB/T 9691-1999 Heating Equipment Model methodology
3 Terms and Definitions
GB/T 10066.4-2004 and as defined in the following terms and definitions apply to this document.
3.1
Bath size dimensionsofbathbasin
Design requirements and on the nameplate bath internal dimensions.
It refers to a circular bath bath bad nominal height and the inner diameter of the top plane and bottom bath between.
It refers to a pair of rectangular bath bath cross-sectional width and length, and height of the bath top and bottom plane between. Face the bath,
Bath "wide" and the body of the operator about the connection in parallel.
3.2
Workspace dimensions dimensionsofworkingzone
It allows you to place the burden of the size of the internal space of the bath bath furnace design requirements (see 5.2.11).
Workspace dimensions include cross-sectional dimension (diameter or width and length) and the effective height.
Cross-sectional dimension of the work area is generally equal to the cross-sectional dimension of the bath. The exceptions are. RYN class of bath and electrode through the cross
RYD class bath furnace section, the cross-sectional dimensions of the work area is equal to the cross-sectional dimensions of the bath minus the tubular heating element or the area occupied by the electrodes
The corresponding size.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10067.411-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 10067.411-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10067.411-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10067.411-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|