|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10051.14-2010: Lifting hooks -- Part 14: Inspection of laminated hooks in service
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10051.14-2010 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Lifting hooks -- Part 14: Inspection of laminated hooks in service
| Valid |
GB/T 10051.14-2010
|
PDF similar to GB/T 10051.14-2010
Basic data | Standard ID | GB/T 10051.14-2010 (GB/T10051.14-2010) | | Description (Translated English) | Lifting hooks -- Part 14: Inspection of laminated hooks in service | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.30 | | Word Count Estimation | 6,680 | | Date of Issue | 2011-01-10 | | Date of Implementation | 2011-09-01 | | Quoted Standard | GB/T 10051.13-2010; GB/T 10051.15 | | Adopted Standard | DIN 15405-2-1988, NEQ | | Regulation (derived from) | National Standard Approval Announcement 2011 No.1 (Total No.166) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the content of laminated hook checks when used, requirements and inspection cycle. This section applies to lifting machinery and lifting the molten metal (ladle) laminated Hook (hereinafter referred to as the hook). | GB/T 10051.14-2010: Lifting hooks -- Part 14: Inspection of laminated hooks in service---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lifting hooks Part 14. Inspection of laminated hooks in service
ਘਣ ౿౽ ಃ ౺౼౺ ಃ ౽౺
ਙ ಂ ౺
͙ ࡺ Ϧ γ ڝ স ტ ᴳ 2
ਖਐ ౹ ਤ ౻౺౺౿౻ ಃ ౻౾ ౼౺౻౺
䊣 䛹 श 䧕
Ji ౻౾ 䘔 ܲ ಐ ऌ❳ ᐻ श 䧕 ҫ⩔ᷬᴑ
ਛਹ ਼ਿ ਟਲ਼ੈ ౻౾ ಐ ਘਸਵਹੀਲ਼ੂਲ਼ਸ ਼ਿਸੈ ੌਵਸ
౼౺౻౻ 6 ౺౻ 6 ౻౺ࣽ ጯ ౼౺౻౻ 6 ౺ ಄6 ౺౻
͙ࡺϦγ ڝ স ტ 䉔 䛻 ⯽ⲏᷬ Shu ᷬ⫗ᕧ ᅬ
͙ ტ ᴳ 2 ࡂ Neko ⤲ ༀ ц ࣽ ጯ
Foreword
GB/T 10051 "crampon" is divided into the following sections.
--- Part 1. mechanical properties, lifting, stress and materials;
--- Part 2. Forged hook technical conditions;
--- Part 3. Forged hook in check;
--- Part 4. shank hook with blank;
--- Part 5. Shank hooks;
--- Part 6. straight double hook shank blank;
--- Part 7. straight double hook shank;
--- Part 8. hook beam blank;
--- Part 9. hook beam;
--- Part 10. hook nut;
--- Part 11. hook nut locking plate;
--- Part 12. Hook locking means;
--- Part 13. Laminated hook technical conditions;
--- Part 14. Laminated hook in check;
--- Part 15. Laminated single hook.
This section GB/T 10051 Part 14.
This portion DIN15405-2. 1988 "Laminated lifting hooks hook in check" non-equivalent.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is responsible for drafting unit. Taiyuan Heavy Machinery Group Co., Ltd.
Participated in the drafting of this section. Beijing Materials Handling Design and Research Institute.
The main drafters of this section. Liurun Lin, Ye Peixin, Zhang Yanping, Wang first Cheng, Shen Changhong, SOIL AND.
Lifting hook
Part 14. Laminated hook in check
1 Scope
This section GB/T 10051 specifies the content inspection of laminated hooks used, requirements and inspection cycle.
This section applies to crane lifting the molten metal (ladle) of laminated hook (hereinafter referred to as the hook).
2 Normative references
The following documents contain provisions which, through reference GB/T 10051 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 10051.13-2010 crampons - Part 13. Laminated hook technical conditions
Part 15 GB/T 10051.15 crampon. Laminated single hook
3 Check the contents and requirements
3.1 Check before use
3.1.1 shall GB/T 10051.13-2010 6.2 inspection provisions hook sign.
3.1.2 hook flag should be consistent with the manufacturer's certificate of compliance.
3.2 Check
3.2.1 Surface Crack
Hook surface should not have cracks, in particular to check hanging hook hole portion, if cracks should be replaced.
3.2.2 Deformation
If you look at the risk of the hook section of the hook and neck deformation, or when the bending radius of the lateral deformation of less than 10 times the thickness should
Replace the hook.
3.2.3 Wear
Check hook hook sleeve and mouth guards, anti-collision shield amount of wear must not exceed 5% GB/T 10051.15 specified basic size.
3.2.4 Welding
Hook defect does not allow welding.
4 Periodic inspection and inspectors
Frequent and regular inspection cycles are shown in Table 1 and Table 2. Frequent inspections by the operator or other persons delegated to perform periodic inspection
It should perform full-time inspectors.
Inspectors should be required in this section 3.2 itemized checks, regular inspections should be recorded and archived.
For special occasions, it can be otherwise.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10051.14-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 10051.14-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10051.14-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10051.14-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|