|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10051.11-2010: Lifting hooks -- Part 11: Securing plates for hook nuts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10051.11-2010 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Lifting hooks -- Part 11: Securing plates for hook nuts
| Valid |
GB/T 10051.11-2010
|
PDF similar to GB/T 10051.11-2010
Basic data | Standard ID | GB/T 10051.11-2010 (GB/T10051.11-2010) | | Description (Translated English) | Lifting hooks -- Part 11: Securing plates for hook nuts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.30 | | Word Count Estimation | 7,763 | | Date of Issue | 2011-01-10 | | Date of Implementation | 2011-09-01 | | Quoted Standard | GB/T 700; GB/T 1804 | | Adopted Standard | DIN 15414-1983, MOD | | Regulation (derived from) | National Standard Approval Announcement 2011 No.1 (Total No.166) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the shank hook nut locking plate type and size, technical requirements and inspection rules. This section applies to prevent rotation of the nut locking nut hook plate (hereinafter referred to as locking plate) on the hook device. | GB/T 10051.11-2010: Lifting hooks -- Part 11: Securing plates for hook nuts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lifting hooks Part 11. Securing plates for hook nuts
ਘਣ ౿౽ ಃ ౺౼౺ ಃ ౽౺
ਙ ಂ ౺
͙ ࡺ Ϧ γ ڝ স ტ ᴳ 2
ਖਐ ౹ ਤ ౻౺౺౿౻ ಃ ౻౻ ౼౺౻౺
䊣 䛹 श 䧕
Ji ౻౻ 䘔 ܲ ಐ श 䧕 㳦 䭞 ᲪᲫ
ਛਹ ਼ਿ ਟਲ਼ੈ ౻౻ ಐ ਣਸਵੋ ੈੀਲ਼ਸਹੈ ਼ਿੋ
౼౺౻౻ 6 ౺౻ 6 ౻౺ࣽ ጯ ౼౺౻౻ 6 ౺ ಄6 ౺౻
͙ࡺϦγ ڝ স ტ 䉔 䛻 ⯽ⲏᷬ Shu ᷬ⫗ᕧ ᅬ
͙ ტ ᴳ 2 ࡂ Neko ⤲ ༀ ц ࣽ ጯ
Foreword
GB/T 10051 "crampon" is divided into the following sections.
--- Part 1. mechanical properties, lifting, stress and materials;
--- Part 2. Forged hook technical conditions;
--- Part 3. Forged hook in check;
--- Part 4. shank hook with blank;
--- Part 5. Shank hooks;
--- Part 6. straight double hook shank blank;
--- Part 7. straight double hook shank;
--- Part 8. hook beam blank;
--- Part 9. hook beam;
--- Part 10. hook nut;
--- Part 11. hook nut locking plate;
--- Part 12. Hook locking means;
--- Part 13. Laminated hook technical conditions;
--- Part 14. Laminated hook in check;
--- Part 15. Laminated single hook.
This section GB/T 10051 Part 11.
The partial modification using DIN15414. 1983 "Lifting apparatus pulley block safety plate."
This section according to DIN15414. 1983 redrafted.
Taking into account China's national conditions, in the use of DIN15414. 1983 when modified, these technical differences are identified in the single vertical line
Involved in the margins, given the technical reasons for differences and their list in Appendix A for reference.
For ease of use, this section also made the following editorial changes.
--- "This standard" be replaced by "this section";
--- With a decimal point "." Instead of a comma as the decimal point "."
Appendix A of this section is an informative annex.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is responsible for drafting unit. Taiyuan Heavy Machinery Group Co., Ltd.
Participated in the drafting of this section. Beijing Materials Handling Design and Research Institute.
The main drafters of this section. Liurun Lin, Ye Peixin, Zhang Yanping, Wang first Cheng, Shen Changhong, SOIL AND.
Lifting hook
Part 11. hook nut locking plate
1 Scope
This section GB/T 15001 specifies the shank hook nut locking plate type and size, technical requirements and inspection rules.
This section is intended to prevent the nut rotating hook nut locking plate (hereinafter referred to as the lock plate) to the hook device.
2 Normative references
The following documents contain provisions which, through reference GB/T 10051 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 700 carbon structural steel (GB/T 700-2006, ISO 630.1995, NEQ)
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance (GB/T 1804-2000, eqv ISO 2768-1.
1989)
3 type and size
3.1 locking plate structure, dimensions shown in Figure 1 and Table 1.
figure 1
Table 1
Hook No.
h11
t2 L d13
mm
Quality ≈
kg
67525610012 0.12
885,256,110 14.5 0.13
10,100,256,125 14.5 0.15
12,100,328,125 14.5 0.25
16 and 20,130,328,160 14.5 0.32
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10051.11-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 10051.11-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10051.11-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10051.11-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|