Path: Home > GB > Page68 > GB 7000.219-2008 Home > Standard_List > GB > Page68 > GB 7000.219-2008

GB 7000.219-2008 English PDF

US$439.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 7000.219-2008: Luminaires -- Part 2-19: Particular requirements -- Air-handling luminaires
Status: Obsolete

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB 7000.219-2008	English	439	Add to Cart	3 days [Need to translate]	Luminaires -- Part 2-19: Particular requirements -- Air-handling luminaires	Obsolete	GB 7000.219-2008

PDF similar to GB 7000.219-2008

Standard similar to GB 7000.219-2008

GB/T 7000.204 GB 7000.204 GB/T 7000.201 GB/T 7000.211 GB/T 7000.212 GB/T 7000.213

Basic data

Standard ID	GB 7000.219-2008 (GB7000.219-2008)
Description (Translated English)	Luminaires -- Part 2-19: Particular requirements -- Air-handling luminaires
Sector / Industry	National Standard
Classification of Chinese Standard	K72
Classification of International Standard	29.140.40; 93.080.30
Word Count Estimation	11,141
Date of Issue	2008-12-31
Date of Implementation	2010-02-01
Older Standard (superseded by this standard)	GB 7000.14-2000
Adopted Standard	IEC 60598-2-19-1981 + A1-1987 + A2-1997, IDT
Regulation (derived from)	Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This Chinese standard relates to use of ventilation ducts for ventilation space (forced ventilation) Ventilation luminaires safety requirements. With tubular fluorescent lamps as the light source, the power supply voltage not exceeding 1000V. This standard should be used in conjunction with GB 7000. 1. It should be noted that this standard only provides a ventilated luminaires safety requirements, there is no specified performance requirements. Note 1: this standard of the"airy"and"airy"refers to the forced ventilation. Note 2: this standard does not use tungsten and except for tubular fluorescent lamps discharge lamps other than the request.

GB 7000.219-2008: Luminaires -- Part 2-19: Particular requirements -- Air-handling luminaires

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Luminaires.Part 2-19. Particular requirements.Air-handling laminalrea s ICS 29.140.40; 93.080.30 K72 National Standards of People's Republic of China GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 Replacing GB 7000.14-2000 Luminaires - Part 2-19. Particular requirements Ventilation fixtures (IEC 60598-2-19. 1981 + A1. 1987 + A2.1997, IDT) Published 2008-12-31 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China issued

Preface Ⅰ Introduction IEC Ⅲ 1 Scope 1 2 1 General test requirements 3 Definitions 1 4 lamps Category 1 Flag 1 5 6 Structure 2 7 creepage distances and clearances 2 8 Ground 2 provisions Terminal 2 9 10 external and internal lines 2 11 Protection against electric shock 3 Thermal test and durability test 12 3 13 dust, water and solid objects 4 14 Insulation resistance and electric strength 4 15 heat, fire, and the resistance to tracking 4 GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997

Foreword

All technical contents of this section is mandatory. This section GB 7000 "lamps" Part 2-19, GB 7000 series of standards existing section 22, the publication date of this section, has Published GB 7000 series of standards are as follows. GB 7000.1-2007 lamps - Part 1. General Requirements and Test GB 7000.2-2008 lamps - Part 2-22. Particular requirements for emergency lighting GB 7000.4-2007 lamps Part 2-10. Particular requirements for children luminaries GB 7000.5-2005 road and street lighting safety requirements GB 7000.6-2008 lamps - Part 2-6. Particular requirements with a built-in transformer or converter tungsten lamp GB 7000.7-2005 safety requirements Floodlights GB 7000.9-2008 lamps Part 2-20. Particular requirements for light string GB 7000.17-2003 safety requirements limit the surface temperature of the lamp GB 7000.18-2003 filament lamps extra low voltage lighting system security requirements GB 7000.19-2005 photo and film (non-professional use) Safety requirements for lighting GB 7000.201-2008 lamps - Part 2-1. Particular requirements for fixed general purpose luminaires GB 7000.202-2008 Luminaires - Part 2-2. Particular requirements Recessed Lighting GB 7000.204-2008 lamps - Part 2-4. Particular requirements for portable general purpose luminaires GB 7000.207-2009 lamps - Part 2-7. Particular requirements for garden use luminaries 7000.208-2008 lamps - Part 2-8 GB . Particular requirements handlamps GB 7000.211-2008 lamps Part 2-11. Particular requirements for the aquarium lamp GB 7000.212-2008 lamps - Part 2-12. Particular requirements for the power outlet mounted nightlight GB 7000.213-2008 Luminaires - Part 2-13. Particular requirements for ground recessed light fixtures GB 7000.217-2008 lamps Part 2-17. Particular requirements for stage lighting, television, film and photographic studios (indoor and outdoor) Lighting GB 7000.218-2008 Luminaires - Part 2-18. Particular requirements for swimming pools and similar lighting GB 7000.219-2008 lamps - Part 2-19. Particular requirements for ventilated luminaires GB 7000.225-2009 Luminaires - Part 2-25. Particular requirements. the building of hospitals and rehabilitation clinics lamp This section is equivalent to using the International Electrotechnical Commission IEC 60598-2-19. 1981 "Luminaires - Part 2. Particular requirements through Chapter 19 Wind lamps, "1987 Amendment No. 1 and No. 2, 1997 Amendment. This partial replacement GB 7000.14-2000. The main difference in this section GB 7000.14-2000 comprises. --- reference standard GB 7000.1-1996 instead GB 7000.1; --- "present standard" to "this section"; --- standard name to "lamps - Part 2-19. Particular requirements for ventilated luminaires"; Standard changed from GB 7000.14 GB 7000.219; --- "dielectric strength" to "electric strength"; --- "factory" to "manufacturer." Appendix A of this section is informative appendix. This section was proposed by China Light Industry Federation. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 This part of the jurisdiction of the National Standardization Technical Committee of electrical lighting fixtures Branch. This section was drafted. National Lighting Fitting Quality Supervision and Inspection Center, the National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Shanghai era Lighting Appliance Testing Co., Philips Lighting (Shanghai) Co., Ltd., Shanghai Institute of lighting fixtures. This part drafter. Chen Chao in Shi Xiaohong, Sang high element, as in Li, Liu Yue accounting. This part of the first edition published in July 2001, this edition is the first revision. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 IEC Foreword 1) IEC formal decisions or agreements on technical issues, was attended by representatives of the International Committee of the technical issues of interest to the Commission Members will be developed to express the international consensus on as closely as possible. 2) These resolutions and agreements in the form of standards, technical reports or guides and publishing, to recommend ways for use by States, in this sense It has been accepted by the National Committees. 3) In order to promote international unification, IEC National Committees undertake to maximize the use of IEC international standards as national standards or to Standard area. IEC standards and any difference between the corresponding national standard should be pointed out as clearly as possible in the latter. IEC 1987 No. 1 by the Rev. 60598-2-19 IEC Technical Committee 34, light bulbs and related products Technical Committee 34D lamps at the Technical Committee to develop. 1987 No. 1 Rev. following documents. June vote Reporting Act 34D (CO) 111 34D (CO) 128 For details on this Rev. vote, the vote on the report can be seen in the table. IEC 1997 No. 2 by the Rev. 60598-2-19 IEC Technical Committee 34, light bulbs and related products Technical Committee 34D lamps at the Technical Committee to develop. 1997 Rev. 2 is based on the following documents. FDIS Report on voting 34D/471/FDIS 34/481/RVD For details on this Rev. vote, the vote on the report can be seen in the table. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 Luminaires - Part 2-19. Particular requirements Ventilation fixtures Range 1 GB 7000 specifies this section (forced ventilation) Safety requirements using a ventilated luminaires or ventilation duct for ventilation space. In tubular fluorescent lamps as the light source, the power source voltage does not exceed 1000V. This section should be used with GB 7000.1. It should be noted that this section only specifies requirements for ventilation luminaires security, no requirement performance. Note 1. in this section, "air" and "vent" means forced ventilation. Note 2. This section does not request the use of other than tungsten and tubular fluorescent lamps of the gas discharge lamp.

2 General test requirements

7000.1 provisions of Chapter 0 Application GB . GB 7000.1 test specified in the test according to the test specified in this order. Definition 3 7000.1 defined in Chapter 1 GB and the following definitions apply. 3.1 A lamp is used in conjunction with specially designed air conditioning system. Note. The air may pass a light source or a separate plenum chamber. 3.2 Operating state of the lamp, neither ventilation nor forced air, but allows air convection. Lighting Category 4 Application of a predetermined 7000.1 Chapter 2 GB , but ventilated luminaires should be classified as Class Ⅰ, Ⅱ Ⅲ class and classes.

5 Mark

Application of GB 7000.1 Chapter 3 5.1 to 5.4 with the following provisions. 5.1 no markings of the built-ventilated luminaires should contain on the attached label or on the manufacturer's instructions provided with the lamp indicates The following warning content, i.e. a groove in the outer surface of the inner member can not be mounted in any fixture within 25mm from the general surface of combustible materials local. 5.2 are marked ventilated luminaires, lamps should indicate the type of structure, this information should be marked on the fixture, or the manufacturer's instructions Is given in the book, the content should be two or one of the following. "Ventilation duct for connection." "Working in a ventilated space." For ventilation apertures adapted lamps equipped with ventilation ducts while increasing attachment, the attachment shall be marked on the lamp. "Ventilation duct for connection." 5.3 GB 7000.1 3.3.6 mentioned in the "special conditions" shall include the following. a) not marked with a minimum distance between the marker lamps ordinary combustible member, and the lamp body of the building structure allows; GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 b) suitable type, for example, "used in the plenum."

6 structure

7000.1 The following provisions of Chapter 4 of the application of 6.1 to 6.3 GB . 6.1 pairs embedded member, and the spring compression impact energy test specified in GB 7000.1 4.13 should provide in accordance with the following Table 1. Table 1 and the impact energy is spring compression Impact energy test was member/Nm compression/mm Providing protection against electric shock member (excluding the ceramic member) 17 0.35 Ceramic member and all other components of the lamp 13 0.20 6.2 If avoid fire hazard, to ensure that the minimum distance between the lamp and certain architectural structural member, with the spacer on the luminaire or class Like device, the method of fixing these devices should enable these devices can not be removed unless cause permanent damage or that it can not be installed properly. This provision does not apply because only affect the security structure needs to be provided spacers. Note. fire hazard location. In some countries, the ventilation system as a fire hazard location, and in these cases, we recommend the following apply. a) a housing to be ventilated luminaires metal or other non-combustible material, and carrying out tests of this Chapter 12, should not exceed the temperature of the lamp body Over 100 ℃. The lamp may be vented, but the total area of the holes should not exceed 10% of the body surface area of the lamp. b) on the horizontal width of the hole facing should not exceed 6mm, width of the other holes can not exceed 10mm. Further, the inner face on the other planes Hole, the width in the horizontal plane of the projector must not exceed 6mm. Lamps with a width of the ventilation duct and the short tube connection hole is not limited. c) ventilated lamp ballast, connecting means element, and the like through-wiring to use a non-combustible material of the protective housing, in order to prevent dust erosion. This may be part of the housing element. When the rated current is not exceeded. 2A, the seat does not apply to the socket, and the connection start means and Short connecting wires. 6.3 pairs of conventional surface mounted directly on the combustible material, i.e. with the mark of the lamps, GB 7000.1 4.16.1 predetermined not suitable for use in For forced ventilation hole. Ventilation strip of luminaires cannula (connected to air device), the test should be done of the sleeve surface as the surface of the lamp.

7 creepage and clearance distances

7000.1 provisions of Chapter 11 Application GB .

8 grounding provisions

The provisions of Chapter 7 7000.1 Application GB . Terminal 9 7000.1 application of the provisions of Chapters 14 and 15 GB . External and internal wiring 10 Application of GB 7000.1 Chapter 5 and 10.1 the following provisions. 10.1 When the flexible cable or cord connected to the supply as the method by the manufacturer when, should meet GB 5023.1 ~ 5023.7 "rated voltage 450/750 and below PVC insulated cables "and GB 5013.1 ~ 5013.7" rated voltage and below rubber insulated cables 450/750 " Under the mechanical and electrical performance requirements, and can withstand a maximum temperature under normal conditions of use may be subjected without damage. Qualification testing by the test section in Chapter 12. Note. the flexible cables and cords embedded ventilated luminaire should be suitable for the following cases. a) flexible cables and cords is not accessible and can not touch flexible cables and cords inside the groove; b) lamps should readily into the recess; c) adjustable ventilated luminaires embedded easy to adjust. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 11 Protection against electric shock 7000.1 provisions of Chapter 8 of the application GB . Thermal test and durability test 12 Application GB Chapter 12 requires 7000.1 12.1 - 12.3 below. 12.1 Thermal test (normal operation) 12.1.1 tests were conducted under static operating conditions. Detailed description of the general structure of the test groove, e.g., the thickness of the wall should comply with the following provisions and Appendix D of GB 7000.1. When lamps with ventilation duct connected to the ventilation sleeve experiment, the cannula should be connected to the side or top of the chamber. When the ventilation air flow aperture lamps were tested, the respective side surface 4.5mm thick hardboard cap and the chamber may be By the sealed, provided with a central distance 25mm, the plurality of apertures of 4.5mm aperture cover on the entire plane. When the test, marked with the symbol embedded ventilated luminaire is mounted in the recess, a distance from the top surface of the test recesses may be 0mm (See FIG. 1) or 25mm (see FIG. 2), but for the lighting installation when not so marked with the symbol of the flat top surface of the solid from the test groove 25mm top surface (see FIG. 1) or 60mm (see Figure 2). Distance "X"/mm Marked lamps 0 No marker lamps 25 FIG. 1 is connected with the ventilation duct with the ventilation sleeve lamps mounted in the test method of the groove Distance "X"/mm Marked lamps 25 No marker lamps 60 FIG 2 is provided with a ventilated luminaires installed in the ventilation method of the pore space of the recess in the test GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997 12.1.2 When the test, except that the temperature tubular fluorescent tube glass surface can not exceed 150 ℃ outside, in the main air channel facing the range The surface temperature should not exceed 100 ℃. Exchanging gas leaving the temperature of the lamp should not exceed 100 ℃. Test temperature in all parts of the groove can not exceed 90 ℃. 12.2 by the lamp or lamps will contact terminals connected to the supply temperature should reach unsafe. 12.2.1 Compliance is checked by the test And the provisions of 12.2.2 to test. 12.2.1 lamp connected to a power cable on the sign should predetermined lamp or lamps provide a flexible cable, which is not marked, said use Cable specified on the next book. Otherwise, use PVC cable on the provisions of GB 5023. Find the hottest part (the outer surface of the inner line or along the lamps) along the normal working position cable may contact the cable portion Light contact member, the contact point of measuring the temperature of this insulating layer by the method according to Appendix K GB 7000.1. 12.2.2 cable working temperature must not exceed the limits in Table 2. 12.3 Thermal test (abnormal operation) 12.3.1 tested under static operating conditions Lighting installation according to the provisions of 12.1.1. 12.3.2 During the test, in addition to the temperature of the surface of tubular fluorescent tubes can not exceed 150 ℃ outside, within a range facing the air passage Surface temperature should not exceed 130 ℃. Test temperature in all parts of the groove can not exceed 130 ℃. IP higher than IP20 lamps accordance with the provisions of Chapter 13 of the present, after the test specified in 9.2 GB 7000.1, a pilot 9.3 GB 7000.1 test conducted 12.4,12.5 and 12.6 in the previous test. Table 2 cable operating temperature Cable working temperature limit specified Cable (including the sheath) providing a predetermined maximum temperature GB 7000.1 12.2 Table lamp with Lighting does not provide wire a) the temperature of the cable marker lamps b) the temperature of the lamp is not marked cable Labeled temperature The provisions of GB 7000.1 12.2 Table Normal P. V. C is the maximum temperature, not Under the influence of mechanical stress 13 dust, solid objects and water Application of GB 7000.1 Chapter 9. Lamps of higher than IP20 IP, the test sequence specified in GB 7000.1 Chapter 9 of this part should be required Chapter 12. 14 Insulation resistance and electric strength Application of GB 7000.1 Chapter 10. 15 heat, fire resistance to tracking and Application of GB 7000.1 Chapter 13. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997

Appendix A

(Informative) Lower. "For ventilation lamps," normal "to set the type of air-conditioning and lighting systems used simultaneously, requiring a predetermined measurement Specified in this state is static working state, i.e., the lamp does not forced ventilation exhaust, but allows normal flow of air, on the luminaire When the air-conditioning system as a lighting installation member, the ambient temperature near the lamp determined by the type and properties of the system, but only by these User evaluation. On the assessment, the temperature should be measured at the midpoint of the recess lighting installation space, with a static model or simulate lighting fixture in its place Limiting effect on the free flow of air generated. For the worst case may occur when the analog forced ventilation, when feeding cold or at room temperature for ventilation, air circulation system should be shut down When the measured temperature, while the air fed to higher than room temperature, can open the air circulation system to measure temperature. GB 7000.219-2008/IEC 60598-2-19. 1981 + A1. 1987 + A2.1997

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 7000.219-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 7000.219-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 7000.219-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 7000.219-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.