HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 3356-2014 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3356-2014: Test method for flexural properties of orientational for reinforced polymer matrix composite materials
Status: Valid

GB/T 3356: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 3356-2014English209 Add to Cart 3 days [Need to translate] Test method for flexural properties of orientational for reinforced polymer matrix composite materials Valid GB/T 3356-2014
GB/T 3356-1999English239 Add to Cart 2 days [Need to translate] Test method for flexural properties of unidirectional fiber reinforced plastics Obsolete GB/T 3356-1999
GB 3356-1982English199 Add to Cart 2 days [Need to translate] Test method for flexural properties of unidirectional fiber reinforced plastics Obsolete GB 3356-1982

PDF similar to GB/T 3356-2014


Standard similar to GB/T 3356-2014

GB/T 3854   GB/T 2567   GB/T 3139   GB/T 3362   GB/T 3355   GB/T 3354   

Basic data

Standard ID GB/T 3356-2014 (GB/T3356-2014)
Description (Translated English) Test method for flexural properties of orientational for reinforced polymer matrix composite materials
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Q23
Classification of International Standard 83.120
Word Count Estimation 9,978
Date of Issue 7/24/2014
Date of Implementation 1/1/2015
Older Standard (superseded by this standard) GB/T 3356-1999
Quoted Standard GB/T 1446; GB/T 3961
Regulation (derived from) National Standards Bulletin No. 19, 2014
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies test methods for flexural properties of composite polymer-based directional fiber test equipment, samples, test procedures, calculations and test reports. This Standard applies to continuous fiber reinforced polymer matrix composit

GB/T 3356-2014: Test method for flexural properties of orientational for reinforced polymer matrix composite materials


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for flexural properties of orientational for reinforced polymer metrix composite materials ICS 83.120 Q23 National Standards of People's Republic of China Replacing GB/T 3356-1999 Directional fiber-reinforced polymer matrix composites Flexural properties Issued on. 2014-07-24 2015-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 3356-1999 "plastic flexural properties of unidirectional fiber reinforced." This standard and GB/T 3356- Compared to 1999, the main changes are as follows. --- Standard name from "plastic flexural properties of unidirectional fiber reinforced" with "directional fiber reinforced polymer matrix composites bend Music performance test method "; --- Expand the scope of application. polymer matrix composites Laminates bending properties of continuous fiber reinforced determination; --- Principle of the method of directional fiber-reinforced polymer matrix composites flexural properties were described; --- The test equipment included as a separate chapter (see Chapter 5), which adds provisions relating to the environment boxes, and provides for loading and head carriage The hardness, HRC40 ~ 45. 5.3 The test method has been described to retain the original three-point bending test side (Method A), an increase of four-point bending test method (Method B), the radial load bearing head and instead of polymer matrix composites Load bearing material samples and head radius. R = 3mm, to 0 ° unidirectional fiber-reinforced composite laminate specimen loading head and branched Block radius. R = 5mm; --- Chapter 6 in the specimen shape and size, in addition to retain the contents of the original standards, the increase of polymer matrix composites specimen thickness Requirements, 2mm ~ 6mm, recommend 4mm (see 6.1). --- Chapter 7, delete the test equipment and test machine calibration two, the test laboratory environmental conditions into standard ambient conditions (see 7.1.1) and non-laboratory standard ambient conditions (see 7.1.2). For conditioning the sample into the dry state (see 7.2.1) and wet Sample state state (see 7.2.2); --- Original standard span adjustment, accurate to within 0.5mm to span measurement is accurate to 0.1mm (see 8.2.1); --- Increased sample failure mode description (see 8.3.4); --- Chapter 9 increased bending calculations, calculated failure strain of four points (see 9.1.2) and calculate the flexural modulus Recommended strain range 0.001 to 0.003 (see 9.1.3). The standard by the China Building Materials Federation, China Aviation Industry Corporation made. The standard fiber-reinforced plastic by the National Standardization Technical Committee, the National Standardization Technical Committee on Aircraft (SAC/TC435) Centralized. This standard was drafted. China Aircraft Strength Research Institute, China Aviation Industry Corporation Beijing Institute of Aeronautical Materials, Materials and Aerospace Technology Research Institute. Drafters of this standard. Shen Wei, Yang Shengchun, true Shen, ZHANG Zi, Wang Liping, WANG Hai, Wang Jian, right Caixia. This standard previously issued as follows. --- GB 3356-1982, GB/T 3356-1999. Directional fiber-reinforced polymer matrix composites Flexural properties

1 Scope

This standard specifies the test equipment directional fiber polymer matrix composites flexural properties of the sample, the test procedure, computing and experiment report. This standard applies to continuous fiber reinforced polymer matrix composites Laminates bending performance measurement, also applicable to other complex polymer matrix Determination of bending properties of composite materials.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1446 Test methods for fiber reinforced plastic properties General GB/T 3961 fiber reinforced plastics

3 Terms and Definitions

Terms and definitions GB/T 3961 defined apply to this document.

4 principle of the method

Polymer-based fiber-reinforced composite laminates straight specimens, three-point or four-point bending method for bending load is applied in the sample Central or middle part of the formation of bending stress distribution field test laminate bending performance.

5 Test Equipment

5.1 test machine and test equipment Test machine and test equipment shall comply with GB/T 1446's. 5.2 environmental chamber Precision environmental control box shall meet the test requirements, the verification of qualified and used in the period. 5.3 Loading head with the bearing 5.3.1 Overview Radius Radius loading head and the seat of 3mm, to 0 ° unidirectional fiber-reinforced composite laminate sample loading head and bearing recoverable By 5mm. Recommended load bearing head and a hardness of HRC40 ~ 45. Loading method is divided into A (three-point bending) and B (four-point bending method).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3356-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3356-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3356-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3356-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3356-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3356-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.