|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3355-2014: Test method for in-plane shear response of polymer matrix composite materials
Status: Valid GB/T 3355: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3355-2014 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Test method for in-plane shear response of polymer matrix composite materials
| Valid |
GB/T 3355-2014
|
| GB/T 3355-2005 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test method for longitudinal transverse shear (L-T shear) properties of fiber reinforced plastics
| Obsolete |
GB/T 3355-2005
|
| GB/T 3355-1982 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method for longitudinal transverse shear (L-T shear)properties of fiber reinforced plastics
| Obsolete |
GB/T 3355-1982
|
PDF similar to GB/T 3355-2014
Basic data | Standard ID | GB/T 3355-2014 (GB/T3355-2014) | | Description (Translated English) | Test method for in-plane shear response of polymer matrix composite materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 9,979 | | Date of Issue | 7/24/2014 | | Date of Implementation | 1/1/2015 | | Older Standard (superseded by this standard) | GB/T 3355-2005 | | Quoted Standard | GB/T 1446; GB/T 3961 | | Regulation (derived from) | National Standards Bulletin No. 19, 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the composite laminates aspect shear test methods for polymer-based performance test equipment, samples, test procedures, calculations and test reports. | GB/T 3355-2014: Test method for in-plane shear response of polymer matrix composite materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for in-plane shear response of polymer matrix composite materials
ICS 83.120
Q23
National Standards of People's Republic of China
Replacing GB/T 3355-2005
Shear Test Method of Composite Polymer Matrix
Issued on. 2014-07-24
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 3355-2005 "fiber reinforced plastics aspect shear test method." This standard and GB/T 3355-2005
Compared to the main changes are as follows.
--- Standard name from "vertical and horizontal shear test method for plastic fiber reinforced" with a "polymer matrix composites aspect shear test side
law";
--- The scope of the original "Determination of unidirectional fiber or fabric-reinforced plastic flat aspect shear modulus, shear strength and vertical aspect
Transverse shear stress - strain curve "to" continuous fiber (unidirectional tape or fabric) reinforced polymer matrix composite laminates Latitude
Determination of "shear properties;
--- Remove 3.1 CKC cut definitions of terms, definitions of terms 0.2% increase shear strength;
--- Increase in Chapter 4, the principle method;
--- The test equipment included as a separate chapter (see Chapter 5), which adds provisions relating to the environment boxes (see 5.2);
--- The width of the sample from the "25mm ± 0.5mm" to "25mm ± 0.1mm", delete the sample sheet strengthening requirements,
Slice count should be enhanced layout and sample length parallel degree requirements (see 6.2);
--- The "specimen thickness [45 °/-45 °] ns, wherein the unidirectional laminates (16, 20 or 24 layers), 4≤n≤6, arbitration sample thickness h
The thickness of the plywood layer 3s. For fabric laminate (8, 12 or 16 layers), 4≤n≤6 "read." stacking sequence of samples
[45/-45] ns (after sub-composite laminates paving repeated n times, then symmetrical paving). Wherein for unidirectional tape, 4≤n≤6;
For fabric, 2≤n≤4 "(see 61, 2005 4.2.);
--- Increased non-laboratory standard ambient conditions (see 7.1.2) in a test environment condition of;
--- The sample conditioning an increase in the content of the wet state of the sample (see 7.2.2);
--- Detailed description of the increase in the extensometer and strain gauges installed in 6.2 and 7.3;
--- Increasing the percentage of measured bending requirements (see 7.3);
--- Shear strength by the symbol "τbLT" changed to "S", the shear stress by the symbol "τnLT" changed to "τ", the shear modulus by the symbol
"GLT" changed to "G12" (see 9.1, 9.2);
--- Modify the definition of shear strength (see 9.1);
--- Increase the strain range measuring shear modulus (see 9.2);
--- Shear strength increased by 0.2%, 0.2% shear strain and shear strain limits of the concept (see 9.3, 9.4).
The standard by the China Building Materials Federation, China Aviation Industry Corporation made.
The standard fiber-reinforced plastic by the National Standardization Technical Committee of the National Standardization Technical Committee on Aircraft (SAC/TC435)
Centralized.
This standard was drafted. China Aircraft Strength Research Institute, China Aviation Industry Corporation Beijing Institute of Aeronautical Materials.
The main drafters of this standard. Zhou Jianfeng, Yang Shengchun, true Shen, ZHANG Zi, Chen Xinwen, Sun Jian Shi, Xiao Juan, Zhang Lipeng.
This standard previously issued as follows.
--- GB/T 3355-1982, GB/T 3355-2005.
Shear Test Method of Composite Polymer Matrix
1 Scope
This standard specifies the composite laminates aspect shear test methods for polymer-based performance test equipment, samples, test procedure, computing
And test reports.
This standard applies to continuous fiber (unidirectional tape or fabric) reinforced polymer matrix composite laminates aspect shear performance measurement for
The composite form is limited to withstand a tensile load direction continuous fiber laminates ± 45 ° plies.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1446 Test methods for fiber reinforced plastic properties General
GB/T 3961 fiber reinforced plastics
3 Terms and Definitions
GB/T 3961 defined by the following terms and definitions apply to this document.
3.1
0.2% 0.2% offsetshearstrength shear strength
Excessive shear strain axis deviates from zero shear strain of 0.2%, parallel to the shear stress - strain curve linear segments of straight line, the straight line and shearing
Force - strain curve corresponding to the intersection of shear stress value that is 0.2% of shear strength.
4 principle of the method
Determination of polymer matrix composites by vertical and horizontal shear properties [± 45] ns laminates uniaxial tensile load applied to the specimen.
5 Test Equipment
5.1 test machine and test equipment
Test machine and test equipment shall comply with GB/T 1446's.
5.2 environmental chamber
Precision environmental control box shall meet the test requirements, the verification of qualified and used in the period.
6 Sample
6.1 Overlay form
Stacking sequence of the sample [45/-45] ns (after sub-composite laminates paving repeated n times, then symmetrical paving). Wherein for
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3355-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 3355-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3355-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3355-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3355-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3355-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|