|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3354-2014: Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials
Status: Valid GB/T 3354: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3354-2014 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials
| Valid |
GB/T 3354-2014
|
| GB/T 3354-1999 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test method for tensile properties of oriented fiber reinforced plastics
| Obsolete |
GB/T 3354-1999
|
| GB 3354-1982 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method for tensile properties of oriented fiber reinforced plastics
| Obsolete |
GB 3354-1982
|
PDF similar to GB/T 3354-2014
Basic data | Standard ID | GB/T 3354-2014 (GB/T3354-2014) | | Description (Translated English) | Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 10,180 | | Date of Issue | 7/24/2014 | | Date of Implementation | 1/1/2015 | | Older Standard (superseded by this standard) | GB/T 3354-1999 | | Quoted Standard | GB/T 1446; GB/T 3961 | | Regulation (derived from) | National Standards Bulletin No. 19, 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the report oriented fiber reinforced polymer matrix composites Laminates performance test method for tensile test equipment, samples, test conditions, test procedures and test calculation. This standard applies to continuous fibers | GB/T 3354-2014: Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials
ICS 83.120
Q23
National Standards of People's Republic of China
Replacing GB/T 3354-1999
Directional fiber-reinforced polymer matrix composites
Test method for tensile properties
Issued on. 2014-07-24
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 3354-1999 "Test Method for Tensile Properties of Plastics oriented fiber reinforced." This standard and GB/T 3354-
Compared to 1999, the main changes are as follows.
--- Standard name from "plastic tensile properties of oriented fiber reinforced" with a "directional fiber reinforced polymer matrix composites
Performance test method "stretch;
--- Will expand the scope of application. the continuous fibers (including fabric) reinforced polymer matrix composites in the symmetric equilibrium Laminates stretchability
Energy measurement;
--- Deleted the original five terms and definitions;
--- The test equipment included as a separate chapter (see Chapter 5), which adds provisions relating to the environment boxes (see 5.2);
--- The 0 ° tensile specimens by the length of "230mm" changed to "230mm ~ 250mm"; arbitration thickness "2.0mm" to "Recommended thick
Degree 1mm "(see 6.2);
--- The 90 ° stretched length of the specimen by the "170mm" changed to "170mm ~ 200mm", and canceled paste stiffener requirements (see 6.2);
--- Remove the plywood content 0 °/90 ° balanced symmetrical layers to size requirements multidirectional laminate sample (see 6.2);
--- The multi-directional laminate tensile specimens by the length of "230mm" changed to "230mm ~ 250mm" (see 6.2);
--- Strengthening of the material-and-paste method sheet has been modified (see 6.3 and 6.4);
--- Increased non-laboratory standard ambient conditions (see 7.1.2) in a test environment condition of;
--- The sample conditioning an increase in the content of the wet state of the sample (see 7.2.2);
--- Detailed description of the increase in the extensometer and strain gauge installation (including installation diagram and extensometer strain gauge pasted shown in 7.3
intention);
--- Increasing the percentage of measured bending requirements (see 7.3);
--- Increased explain the failure mode (see 8.3.3);
--- Increased measuring the elastic modulus of strain range (see 9.2, 9.3);
--- The tensile failure elongation to tensile failure strain (see 9.4).
The standard by the China Building Materials Federation, China Aviation Industry Corporation made.
The standard fiber-reinforced plastic by the National Standardization Technical Committee, the National Standardization Technical Committee on Aircraft (SAC/TC435)
Centralized.
This standard was drafted. China Aircraft Strength Research Institute, China Aviation Industry Corporation Beijing Institute of Aeronautical Materials, Harbin glass
Steel Institute.
The main drafters of this standard. Sun Jian Shi, Yang Shengchun, true Shen, Chen Xinwen, Wang Xinghua, Shen Wei, Wang Jian, Xiao Juan.
This standard previously issued as follows.
--- GB 3354-1982, GB/T 3354-1999.
Directional fiber-reinforced polymer matrix composites
Test method for tensile properties
1 Scope
This standard specifies the test equipment oriented fiber reinforced polymer matrix composites laminate tensile properties of the sample, the test strip
Parts, test procedures, calculations and test reports.
This standard applies to continuous fibers (including fabric) reinforced polymer matrix composites was measured within a balanced symmetric laminate surface tensile properties.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1446 Test methods for fiber reinforced plastic properties General
GB/T 3961 fiber reinforced plastics
3 Terms and Definitions
Terms and definitions GB/T 3961 defined apply to this document.
4 principle of the method
For long thin straight specimen holder by gripping end to the friction load, uniform tension in the working section of the sample field, stretch forming test material
performance.
5 Test Equipment
5.1 test machine and test equipment
Test machine and test equipment shall comply with GB/T 1446's.
5.2 environmental chamber
Precision environmental control box shall meet the test requirements, the verification of qualified and used in the period.
6 Sample
6.1 Overlay form
The specimen shall have symmetric equilibrium plies form.
6.2 specimen shape and size
Shape and size of the sample shown in Figure 1 and Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3354-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 3354-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3354-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3354-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3354-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3354-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|