HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 29966-2013 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 29966-2013: Food additive -- Diallyl disulfide
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 29966-2013English209 Add to Cart 3 days [Need to translate] Food additive -- Diallyl disulfide Valid GB 29966-2013

PDF similar to GB 29966-2013


Standard similar to GB 29966-2013

GB 29938   GB 29924   GB 29989   GB 29958   GB 29960   GB 29957   

Basic data

Standard ID GB 29966-2013 (GB29966-2013)
Description (Translated English) Food additive -- Diallyl disulfide
Sector / Industry National Standard
Classification of Chinese Standard C53
Classification of International Standard 67.020
Word Count Estimation 9,914
Regulation (derived from) China Food & Drug Administration [2013] No. 234, November, 1, 2013
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China
Summary This standard applies to food additives: diallyl disulfide.

GB 29966-2013: Food additive -- Diallyl disulfide

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Food additive-Diallyl disulfide National Standards of People's Republic of China National Food Safety Standard Food Additives diallyl sulfide Issued on. 2013-11-29 2014-06-01 implementation National Food Safety Standard Food Additives diallyl sulfide

1 Scope

This standard applies to the allyl chloride and sodium sulfide for raw materials of food additives diallyl sulfide. 2 chemical name, molecular formula, molecular mass and structural formula 2.1 Chemical Name Diallyl disulfide Formula 2.2 C6H10S2 2.3 formula SS 2.4 relative molecular mass 146.27 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Colorless to pale yellow color of the sample was placed inside color than the tube, were visually observed Liquid state Aroma garlic aroma GB/T 14454.2 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Content, w /% of diallyl disulfide ≥90.0 Allyl disulfide allyl sulfide ≥95.0 Appendix A Refractive index (20 ℃) 1.537 ~ 1.551 GB/T 14454.4 The relative density (25 ℃/25 ℃) 0.998 ~ 1.015 GB/T 11540

Appendix A

Determination of diallyl sulfide content A.1 instruments and equipment A.1.1 chromatograph. According to GB/T 11538-2006 provisions in Chapter 5. A.1.2 Column. capillary column. A.1.3 Detector. Hydrogen flame ionization detector. A.2 Determination Area normalization method. According to GB/T 11538-2006 10.4 Determination. A.3 repeatability and results are shown According to GB/T 11538-2006 provisions in 11.4, shall comply with the requirements. Food Additives diallyl sulfide gas chromatograph (area normalization method) See Appendix B.

Appendix B

Food Additives diallyl sulfide gas chromatogram (Area normalization method) B.1 food additives diallyl sulfide gas chromatogram Figure B.1. 1-- allyl sulfide; 2-- allyl disulfide. Figure B.1 food additives diallyl sulfide gas chromatogram B.2 operating conditions B.2.1 Column. capillary column, length 30 m, an inner diameter of 0.25 mm. B.2.2 stationary phase. polyethylene glycol. B.2.3 film thickness. 0.25 μm. B.2.4 chromatography oven temperature. 140 ℃ constant temperature 10 min; then linear temperature program from 140 ℃ ~ 200 ℃, the rate of 10 ℃/min; most After 200 ℃ heated 20 min. B.2.5 Inlet temperature. 240 ℃. B.2.6 detector temperature. 240 ℃. B.2.7 Detector. Hydrogen flame ionization detector. B.2.8 carrier gas. nitrogen. B.2.9 pre-column pressure. 60 kPa. B.2.10 Injection volume. about 0.2 μL. B.2.11 Split ratio. 100︰1

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 29966-2013_English be delivered?

Answer: Upon your order, we will start to translate GB 29966-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 29966-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB 29966-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.