Path:
Home >
GB >
Page117 > GB 29144-2012
Home >
Standard_List >
GB >
Page117 > GB 29144-2012
US$239.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 29144-2012: Minimum allowable values of energy efficiency and the energy efficiency grades for self-ballasted electrodeless fluorescent lamps with general lighting service
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 29144-2012 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Minimum allowable values of energy efficiency and the energy efficiency grades for self-ballasted electrodeless fluorescent lamps with general lighting service
| Obsolete |
GB 29144-2012
|
PDF similar to GB 29144-2012
Basic data
| Standard ID | GB 29144-2012 (GB29144-2012) |
| Description (Translated English) | Minimum allowable values of energy efficiency and the energy efficiency grades for self-ballasted electrodeless fluorescent lamps with general lighting service |
| Sector / Industry | National Standard |
| Classification of Chinese Standard | F01 |
| Classification of International Standard | 27.010 |
| Word Count Estimation | 6,651 |
| Quoted Standard | GB/T 21091; GB 21554 |
| Regulation (derived from) | National Standards Bulletin No. 41 of 2012 |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This Chinese standard specifies the general lighting pole with self-ballasted fluorescent lamp (hereinafter referred to as: extreme self-ballasted fluorescent lamps) The energy efficiency rating, energy efficiency limit values ??and test methods for evalu |
GB 29144-2012: Minimum allowable values of energy efficiency and the energy efficiency grades for self-ballasted electrodeless fluorescent lamps with general lighting service
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Minimum allowable values of energy efficiency and the energy efficiency grades for self-ballasted electrodeless fluorescent lamps with general lighting service
ICS 27.010
F01
National Standards of People's Republic of China
General lighting self-ballasted electrodeless fluorescent lamps
Energy efficiency and energy efficiency level limit value
Published 2012-12-31
2013-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China issued
Foreword
4.4 This standard is mandatory, the rest are recommended.
This standard was drafted in accordance with rules GB/T 1.1-2009 given.
This standard Conservation and Environmental Protection, the Ministry of Industry and Information Technology Energy Saving and Comprehensive Utilization Department put forward by the National Development and Reform Commission resources.
This standard by the National Energy Foundation and Management Standardization Technical Committee (SAC/TC20).
Drafted by. China National Institute of Standardization, Changzhou Lai Yue Lighting Co., Ltd., Anhui YORK Kyushu Light Co., mountain
East Perth Wright Lighting Appliance Co., Ltd., Connaught Hill Optoelectronics Technology (Shanghai) Co., Ltd., the National Electric Light Source Quality Supervision and Inspection Center (on
Hai), Beijing Lighting Research Institute, Changzhou Fu Electronics Co., Ltd., Chengdu Xinyuan Lighting Times Electric Co., Ltd., Fujian JK Yaming
Electric Co., Ltd., Guangzhou Lang Radford Lighting & Electrical Technology Co., Ltd., Hebei Shijiazhuang Baoshi energy-efficient lighting Technology Co., Ltd., Jingjing photo
Technology Co., Ltd., Shenzhen Gelin Lai Electronic Technology Co., Ltd., Zhejiang Shenghui Lighting Co., Ltd. Zhejiang Jiang Xiongbang energy-saving products, Liaoning
Ning Baolin Group, Zhejiang Branch Electronic Technology Co., Ltd., Guangdong Shunxiang energy-efficient lighting Technology Co., Ltd., Suzhou Ou Peng Optoelectronics Technology Co.,
Division, China Energy Conservation Association, energy-saving and green energy committee, Jiang Suzheng Hui Lighting Technology Co., Ltd., Beijing win is the source of energy-saving technology services are
Limited, Chengdu Dongxu Energy Technology Co., Ningbo, into Albert Electronics Co., Ltd., Shanghai Xi Yi Electronic Technology Co., Ltd.
The main drafters. Zhao Yuejin, Pan Shudong, Zhang Ngai Ling, Feng Fukun, Wang Ai-Qun, Yu Anqi, Wang Lihong, Liu Shiqing, Wang Jiacheng,
Zhang Quan, Ye Lianying, Zhou Lihua, Zhou Fengjie, Xie Li Shan, Shen Jin Xiang, Peng Fei month, Xu Shuliang, Shi Long Long, Chuan Xu name, Qian Juan, Durning Road,
Wang Yingchun, Fan Yonggong, SUN Xiu Fang, Lv Haiming, Zouzhong Qiu, Cheng Fei.
General lighting self-ballasted electrodeless fluorescent lamps
Energy efficiency and energy efficiency level limit value
1 Scope
This standard specifies the general lighting self-ballasted electrodeless fluorescent lamps (hereinafter. Self-ballasted electrodeless fluorescent lamps) energy efficiency rating, energy efficiency is defined
Value, saving evaluation values and test methods.
This standard applies to the rated voltage of 220V, 50Hz AC supply frequency, the nominal power of 10W ~ 60W, or the use of screw base card
Lamp cap, in domestic and similar general lighting purposes, the stable ignition and start control member integrally electrodeless self-ballasted fluorescent lamp.
2 Normative references
The following documents for the application of this document is essential. For dated references, only applies to the version dated paper
Pieces. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 21091 general lighting performance requirements ballasted electrodeless fluorescent lamps
GB 21554 for general lighting self-ballasted electrodeless fluorescent safety requirements
3 Terms and Definitions
GB/T 21091 and GB 21554 defines the following terms and definitions apply to this document.
3.1
Self-ballasted electrodeless fluorescent light effect initial initialluminousefficiencyforself-balastedelectrodelessfluorescentlamps
Self-ballasted electrodeless fluorescent lamps initial luminous flux ratio and the measured power, in units of lumens per watt (lm/W).
3.2
Self-ballasted electrodeless fluorescent energy efficiency limit minimumalowablevaluesforself-balastedelectrodelessfluorescentlamps
The initial value of the minimum luminous efficacy under standard test conditions, allowed electrodeless self-ballasted fluorescent lamp.
3.3
Self-ballasted electrodeless fluorescent energy evaluation values evaluatingvaluesofenergyconservationforself-balastedelectrodeless
fluorescentlamps
Under standard test conditions, the initial minimum energy self-ballasted electrodeless fluorescent lamp luminous efficacy to be achieved.
4. Technical Requirements
4.1 Basic requirements
This standard applies self-ballasted electrodeless fluorescent lamps, safety and performance should be consistent with GB 21554 and GB/T 21091 requirements.
4.2 Lumen maintenance
Self-ballasted electrodeless fluorescent lamps in the ignition to 2000h, lumen maintenance of not less than 93%.
4.3 energy efficiency rating
Self-ballasted electrodeless fluorescent lamps energy efficiency rating is divided into 3, with 1 being the highest energy efficiency. Luminous efficacy of each level is not lower than specified in Table 1.
Table 1 lists the rated power value is not self-ballasted electrodeless fluorescent lamps, the luminous efficiency is determined by linear interpolation.
Table 1 Self-ballasted electrodeless fluorescent lamps energy efficiency rating in lumens per watt
Rated power/W 1 2 3 Level
17,585,549
19,615,752
21,635,954
22,636,055
24,656,257
25,666,358
26,676,459
27,676,459
28,686,560
29,696,561
30,696,661
31,706,662
33,706,763
34,716,763
35,716,763
36,716,863
≥37 71 68 64
4.4 energy efficiency limit
Self-ballasted electrodeless fluorescent energy efficiency limit shall be as specified in Table 1 of the 3 energy efficiency level.
Evaluating values of energy 4.5
Self-ballasted electrodeless fluorescent energy evaluation values in Table 1 should meet energy efficiency rating than a predetermined level and 2.
5 Test methods
5.1 General test requirements
According to the general requirements of GB/T 21091 the test was carried out.
5.2 Initial luminous efficacy
Since ballasted Aging lOOh electrodeless fluorescent lamps, the luminous flux according to the test methods specified in GB/T 21091 is performed, light efficiency is calculated by
inferred.
5.3 Lumen maintenance
21091 in accordance with the lumen maintenance test method GB/T .
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 29144-2012_English be delivered?
Answer: Upon your order, we will start to translate GB 29144-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 29144-2012_English with my colleagues?
Answer: Yes. The purchased PDF of GB 29144-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.