Path:
Home >
GB >
Page122 > GB 26755-2011
Home >
Standard_List >
GB >
Page122 > GB 26755-2011
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 26755-2011: Fire mobile illuminating device
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 26755-2011 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Fire mobile illuminating device
| Valid |
GB 26755-2011
|
PDF similar to GB 26755-2011
Basic data
| Standard ID | GB 26755-2011 (GB26755-2011) |
| Description (Translated English) | Fire mobile illuminating device |
| Sector / Industry | National Standard |
| Classification of Chinese Standard | C85 |
| Classification of International Standard | 13.220.10 |
| Word Count Estimation | 11,154 |
| Date of Issue | 2011-07-20 |
| Date of Implementation | 2011-11-01 |
| Quoted Standard | GB/T 191; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2423.10; GB/T 2423.38; GB/T 3767; GB/T 3785; GB 4208 |
| Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2011 |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This Chinese standard specifies the fire portable lighting devices terms and definitions, classifications and models, technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to fire portable lighting devices. |
GB 26755-2011: Fire mobile illuminating device
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fire mobile illuminating device
ICS 13.220.10
C85
National Standards of People's Republic of China
Fire mobile lighting fixtures
Issued on. 2011-07-20
2011-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard Chapter 5, Chapters 7 and 8.1 are mandatory, the rest are recommended.
This standard is based on GB/T 1.1-2009 given rules for writing.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by the People's Republic of China Ministry of Public Security.
This standard by the National Standardization Technical Committee appliances Fire Fire accessories Technical Committee (SAC/TC113/SC5) centralized.
This standard was drafted. Shanghai Fire Research Institute of Ministry of Public Security.
Drafters of this standard. Shen Jian Min, wearing national, Zhu Jiang, Li Rui Kun, Zhang Yan, Zeng Yue Lei.
Fire mobile lighting fixtures
1 Scope
This standard specifies the terms and definitions fire mobile lighting device classification and models, technical requirements, test methods, inspection rules, marking
Chi, packaging, transport and storage.
This standard applies to portable fire illumination device.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.38 Environmental testing for electric and electronic products Part 2. Test methods Test R. Water test method and guidance
Determination of sound power levels of noise sources reflecting plane free field engineering method GB/T 3767 sound pressure
GB/T 3785 sound level meter electric, acoustic performance and test methods
GB 4208 housing protection (IP Code)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Fire mobile lighting fixtures firemobileiluminatingdevice
Fire fighting and rescue when used by the illumination system, power supply system, lift system and other components, portable, towing, or by their own means of transport
Mobile lighting apparatus.
3.2
Lighting system iluminatingsystem
Medallions from the light source and other components, can be automatic or manual rotation, pitching implement a lighting device.
3.3
Power Supply System powersupplysystem
AC power supply, generator or battery for the lifting system, lighting system provides a means of electrical energy.
3.4
Lift system take-offandlandingsystem
The illumination system can implement a lifting device.
3.5
Duty cycle actioncycle
Lift rod lift system having a mobile fire lighting device from an initial position to its highest position and then back to the initial position over
Cheng; after lighting the fire mobile device horizontally rotating one week with a swivel, tilt function of the lighting system stoop, Yang process each of 60 °; with a lift
And rotary systems, mobile lifting rod fire lighting apparatus pitch function of the lighting system was raised to the highest position, the lighting system of water from the initial position
Rotary flat overlooking a week later, Yang each 60 °, the lift rod back to the initial position of the process.
4 Classification and models
4.1 Classification
Fire mobile lighting fixtures can be divided into vehicle-mounted lighting device and a mobile fire-board fire fighting mobile lighting fixtures.
4.2 Model
Fire mobile lighting device (hereinafter referred to as a lighting device) model preparation should meet the following requirements.
YZ
Fire mobile lighting fixtures
Lighting system type (H expressed swivel, tilt function, no function is omitted)
Light total power in kilowatts (kW)
- □
Lift height in meters (m), without lifting system is omitted
Illumination device classification (C represented vehicle type;-board formula omitted)
Power supply (F represents powered generators; C indicates battery power; AC power supply is omitted)
Enterprise modified code. A, B
Example.
Model YZH4-7CA expressed swivel, tilt function, sources total power 4kW, lifting height of 7m, AC power supply type A vehicle-mounted shift fire
Dynamic lighting fixtures.
5 Technical requirements
5.1 Appearance quality
Illuminating surface of the device should be no rust, no coating peeling or blistering, no scratches ﹑ broken cracks and other mechanical damage, no parts of the fastening
Loose.
5.2 Anti-voltage fluctuation performance
AC-powered lighting devices in 198V ~ 253V voltage fluctuation range should be able to work properly.
5.3 Insulation resistance
The insulation resistance between the illumination device and the chassis external charging terminals and power terminals and ground should be not less than 100MΩ.
5.4 Compressive strength
6.4 subjected to compressive strength test prescribed between the illumination means external charging terminals and the chassis. Test should be no breakdown, flashover.
5.5 Reliability
After the illumination device 100 via the duty cycle reliability test, the lighting device should be able to work properly.
5.6 Climatic, mechanical environmental adaptability
Lighting devices should be able to withstand the conditions specified in Table 1 of the test, after the test, the lighting device should be able to work properly.
Table 1 weatherability, mechanical environmental test
Name of Test Test Parameters Test Conditions Test status
Hot test
Temperature of 55 ℃ ± 2 ℃
Time 2h
Energized state
Low temperature test
Temperature -20 ℃ ± 2 ℃
Time 2h
Energized state
Damp heat test
Temperature of 30 ℃ ± 2 ℃
Humidity 93% ± 2%
Time 2h
Energized state
Rain test
Water quantity 24.5L/min ± 0.5L/min
Spray angle of 45 °
Time 5min
No power
Vibration Test
Frequency range of 10Hz-55Hz-10Hz
Sweep rate 1 octave/min
20 sweep cycles
1g acceleration amplitude
Axis direction of three mutually perpendicular directions
No power
5.7 operating noise
Lighting apparatus operating noise should not exceed 90dB.
5.8 parts requirements
5.8.1 lifting system
5.8.1.1 Lifting time
Lifting height of not more than 5m illumination device, which rise and fall times shall be not more than 60s; according to the lifting height of more than 5m of
Ming means a rise time and fall time shall be no greater than 120s.
5.8.1.2 Performance Limit
Lift system should have good spacing between the lift rod after reaching the maximum height of the lift rod within 1h decline should not exceed 6cm.
5.8.1.3 Bending Properties
Top lifters to bear according to formula (1) After the calculated level of tension can not produce permanent deformation.
F = Wp × S (1)
Where.
F --- the level of tension in kilograms (kg);
S --- Medallions area in square meters (m2);
Wp --- pressure, in kilograms per square meter (kg/m2), take 51kg/m2 (the standard state wind speed of 28.4m/s, namely
10 wind).
5.8.2 Lighting System
5.8.2.1 horizontal rotation angle, pitch angle
Level with a swivel, tilt function lighting device back angle, pitch angle should be in accordance with Table 2.
5.8.2.2 Variable angular rate
Lighting device with automatic rotation, tilt function, variable angular rate shall comply with the provisions of Table 2.
Table 2 horizontal rotation angle, tilt angle, angular rate change
Horizontal rotation angle/(°) pitch angle/(°) horizontal rotation angle varying angular rate/[(°)/s] Variable pitch angle angular rate/[(°)/s]
≥360 ≥60 ≥15 ≥15
5.8.2.3 illuminance
50m truck mounted lighting device at the illumination should be not less than 5lx, non-vehicle lighting device 10m of the illumination should be not less than 100lx.
5.8.3 Power Supply System
5.8.3.1 Continuous working time
Lighting device generator or battery-powered, continuous working time not less than 8h.
5.8.3.2 Start Performance
Generator-powered lighting apparatus according to the provisions of 6.14 test, the generator should be able to successfully start within 30s.
5.9 Protective Performance
Lighting protection performance should meet the requirements specified in GB 4208 of IP55.
5.10 job stability
Lighting apparatus support frame should be able to withstand horizontal thrust 100N, a lighting device should not be dumped.
6 Test methods
6.1 appearance quality inspection
Quality visual appearance of the lighting device.
6.2 anti-voltage fluctuation performance test
The accuracy no less than ± 5% AC voltage regulator power supply circuit device is connected to AC power supply lighting device, a lighting device is turned to adjust the cross
Flow regulator device so that power supply voltage lighting apparatus are 198V, 220V and 253V, the lighting apparatus work.
6.3 Insulation resistance test
With an accuracy not less than ± 5% Insulation resistance meter measuring pressure between the external charging terminals and the chassis and power supply 500V DC
Terminals and ground insulation resistance.
6.4 compressive strength test
With an accuracy not less than ± 10% compressive strength tester 1500V ± 100V AC power is applied between the external terminals and housing charged
Pressure to maintain 1min.
6.5 Reliability Test
Power (closed source), operating 100 duty cycle lighting.
6.6 climatic, mechanical aptitude test environment
6.6.1 Low Temperature Test
Low temperature test condition of the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.1 performed.
6.6.2 Damp heat test
Damp heat test conditions of illumination device in accordance with the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.3 performed.
6.6.3 High-temperature test
High temperature test condition of the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.2 performed.
6.6.4 Test rain
Test conditions and rain lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.38 performed.
6.6.5 Vibration Test
Vibration test conditions the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.10 performed.
6.7 Noise test work
Acoustic testing environment should comply with GB/T 3767, the sound level meter should meet the requirements of GB/T 3785, and its accuracy class
Ⅰ level.
The lighting device according to the normal operating position placed. In rated working voltage power supply, working at full capacity. In the vertical distance illumination device 1m,
High sound pressure level measured at 1m, whichever is greater.
6.8 Lifting Time Trial
Start lifter, lifter rise and fall times are measured with a stopwatch.
6.9 Limit Performance Test
When the lift rod to its maximum height, measured to the top of the lift rod height from the ground and lifting rod is at rest, 1h after the measure
height. Calculate the lift rod slipped away.
6.10 Bending Performance Test
Applying a predetermined tension 5.8.1.3 at the top of the lift rod horizontally, 10min after unloading.
6.11 horizontal rotation angle, pitch angle and angle-rate tests
Operation of the light source illuminating device horizontally swing and pitching motion, measured with a horizontal angle gauge measuring the rotational angle and pitch angle, angle measurement with a stopwatch
Time required to calculate the variable angular rate.
6.12 illuminance test
Distribution of vehicular illumination device illumination test points in Figure 1, wherein the photographic light meter facing the light source direction, were tested at 50m
Luminance value of each point. Distribution of non-vehicular illumination device illumination test points according to claim 2, the illuminance meter photosensitive facing the direction of the light source, the test
10m at the illuminance values.
Figure 1 vehicle-mounted illumination device illumination test chart
Figure 2 Non-vehicular illumination device illumination test chart
6.13 Continuous operating time test
Turn lights, when the light source reaches maximum illumination value starts counting until the illumination value is less than 5.8.2.3 predetermined value. Lighting calculation
Continuous working time of the device.
6.14 Start Performance Test
-5 ℃ generator placed in the test environment placed 24h, after removing immediately start the test. Recording start time.
6.15 Protective Performance Test
Conducted according to the provisions of GB 4208.
6.16 Job stability test
The illumination device disposed normal operating position, is applied on top of the horizontal thrust of 100N illumination device support frame.
7 Inspection rules
7.1 Inspection classification
Product inspection is divided into type test and factory inspection.
7.2 Type inspection
7.2.1 In the following cases should be type tested.
--- When setting new product trial;
--- Product design, material, structure, process the larger changes;
--- Normal production for three years;
--- Discontinued one year to resume production;
--- National quality supervision agency type inspection requirements.
7.2.2 type test project execution according to the provisions of Chapters 5 and 8.1.
7.2.3 Type test samples taken at random from the qualified products factory inspection, the number of samples for one.
Results 7.2.4 seized items all meet the requirements of this standard, the type of product inspection judgment.
7.3 factory inspection
7.3.1 Each lighting device shall be subject to factory inspection.
7.3.2 factory inspection of the implementation of the project according to the provisions 5.1,5.2,5.3,5.7,5.8.1.1,5.8.1.2 and 5.8.2.
Results 7.3.3 seized items all meet the requirements of this standard, sentenced to factory inspection.
8 signs, packaging, transportation and storage
8.1 mark
Shall be provided with a suitable position on the product nameplate, mark the following.
a) manufacturer's name;
b) the product name;
c) Model;
d) the date of manufacture;
e) the implementation of the standard code.
8.2 Packaging
Packaging - Pictorial marking a lighting device 8.2.1 shall comply with GB/T 191's.
8.2.2 The outer box should be marked with the following.
a) manufacturer's name;
b) Type and name;
c) the date of manufacture;
d) "Handle with care", "Up", "fear wet" and other words or symbols.
8.2.3 Products should be placed in a shock-absorbing cushion in the box, the box should be accompanied by product certification, packing list and product manuals, technical services
Works alone.
8.3 Transport
Product transportation process should avoid violent collision and take measures moisture.
8.4 Storage
The product should be stored in dry, ventilated environment.
1102-
Rights Proprietary Rights Reserved
ISBN. 155 066 · 1-43610
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 26755-2011_English be delivered?
Answer: Upon your order, we will start to translate GB 26755-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 26755-2011_English with my colleagues?
Answer: Yes. The purchased PDF of GB 26755-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.