|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 25545-2010: The national food safety standards of food additives -- L(+) -tartaric acid
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 25545-2010 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
The national food safety standards of food additives -- L(+) -tartaric acid
| Valid |
GB 25545-2010
|
PDF similar to GB 25545-2010
Basic data | Standard ID | GB 25545-2010 (GB25545-2010) | | Description (Translated English) | The national food safety standards of food additives -- L(+) -tartaric acid | | Sector / Industry | National Standard | | Classification of Chinese Standard | X42 | | Classification of International Standard | 67.220.20 | | Word Count Estimation | 8,828 | | Date of Issue | 2010-12-21 | | Date of Implementation | 2011-02-21 | | Regulation (derived from) | Ministry of Health Bulletin No. 19 of 2010 | | Issuing agency(ies) | Ministry of Health of the People's Republic of China | | Summary | This Chinese standard applies to maleic anhydride and nitrogen peroxide as raw material by oxidation, hydrolysis and fermentation obtained food additives L (+) tartaric acid. | GB 25545-2010: The national food safety standards of food additives -- L(+) -tartaric acid---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The national food safety standards of food contains L () - tartaric acid
National Standards of People's Republic of China
National standards for food safety
Food additive L () - tartaric acid
2010-12-21 release
2011-02-21 Implementation
Issued by the Ministry of Health of the People's Republic of China
Foreword
Appendix A of this standard is a normative appendix.
National standards for food safety
Food additive L () - tartaric acid
1 Scope
This standard applies to maleic anhydride and hydrogen peroxide as raw materials by oxidation, enzymatic hydrolysis and the preparation of food additives L () - wine
Stone acid.
2 normative reference documents
The documents cited in this standard are indispensable for the application of this standard. Any reference to the date of the document, only the date of the edition
This applies to this standard. For undated references, the latest edition (including all amendments) applies to this standard.
3 Chemical name, molecular formula, structural formula and relative molecular mass
3.1 Chemical name
L-2,3-dihydroxy succinic acid
3.2 Molecular formula
C4H6O6
3.3 Structural formula
3.4 Relative molecular mass
150.09 (according to.2007 international relative atomic mass)
4 technical requirements
4.1 sensory requirements. should be consistent with the provisions of Table 1.
Table 1 sensory requirements
The project requires a test method
Color and tissue state Colorless translucent crystal or white powder
Odor is sour
Take appropriate laboratory samples, placed in a clean, dry white porcelain dish, in natural light
Under the visual observation, smell the smell
4.2 Physical and chemical indicators. should be consistent with the provisions of Table 2.
Table 2 Physical and chemical indicators
Item Index Test Method
L () - tartaric acid (based on C4H6O6, dry basis), w /% 99.7 to 100.5 Appendix A, A.4
Specific rotation αm (25 ° C, D)/[(°) · dm2 · kg-1] 12.0 to 13.0 Appendix A A.5
Arsenic (As)/(mg/kg) ≤ 2 Appendix A A.6
Lead (Pb)/(mg/kg) ≤ 2 Appendix A A.7
Burning residue, w /% ≤ 0.05 Appendix A A.8
Dry reduction, w /% ≤ 0.5 Appendix A A.9
The oxalate test was tested by Appendix A. A.10
Sulfate Test Pass Test Appendix A in A.11
Appendix A
(Normative appendix)
Testing method
A.1 Warning
Some of the test procedures specified in the test method may result in a hazardous situation. Operators should take appropriate safety and protective measures.
A.2 General provisions
Unless otherwise stated, only the reagents identified as analytical reagents and the tertiary water specified in GB/T 6682-2008 are used in the analysis.
Standard titration solution used in the test method, standard solution for the determination of impurities, preparations and articles, in the absence of other requirements,
GB/T 601, GB/T 602 and GB/T 603.
A.3 Identification test
A.3.1 Reagents and materials
A.3.1.1 Pyridine.
A.3.1.2 Acetic anhydride.
A.3.2 Analysis steps
Weigh about 10 mg of laboratory samples, add to 15mL pyridine and 5mL acetic anhydride in a mixed solution, the solution should be green.
A.4 L () - Determination of tartaric acid
A.4.1 Methodological Summary
The aqueous solution of the dried sample was titrated with sodium titanate titration solution with phenolphthalein as the indicator, and the solution was titrated according to the standard of sodium hydroxide
Consumption, calculated to C4H6O6 total acid content of L () - tartaric acid content.
A.4.2 Reagents and materials
A.4.2.1 Sodium hydroxide standard titration solution. c (NaOH) = 1.0 mol/L.
A.4.2.2 phenolphthalein indicator solution. 10g/L.
A.4.3 Analysis steps
A.4.3.1 Weigh 2.0g A.9 in dry matter A, accurate to 0.0002g, add 40mL of water without carbon dioxide dissolved, add 2 drops of phenolphthalein
Indicator solution, titration with sodium hydroxide titration solution to reddish, keep 30s do not fade for the end.
A.4.3.2 At the same time as the determination, the same amount of reagent solution was used as a blank test in the same procedure as for the measurement.
A.4.4 Calculation of results
L () - tartaric acid (based on C4H6O6, dry basis) mass fraction w1, the value in%, calculated according to formula (A.1).
w1 =
[(V-V0)/1000] cM
m x 100%
(A.1)
Where.
V --- sample consumption of sodium hydroxide standard titration solution (A.4.2.1) volume of the value in milliliters (mL);
V0 --- blank test consumption of sodium hydroxide standard titration solution (A.4.2.1) volume of the value in milliliters (mL);
c - the exact value of sodium hydroxide standard titration solution concentration in moles per liter (mol/L);
m - the mass of the sample, in grams (g);
M - tartaric acid (1/2C4H6O6) in grams per mole (g/mol) (M = 75.04).
The arithmetic mean of the results of two parallel measurements is the result of the report. The absolute difference between the two parallel determinations is not more than 0.2%.
A.5 Determination of specific rotation
A.5.1 Weigh 10g of laboratory samples, accurate to 0.001g, dissolved in water and transferred to 50mL volumetric flask, diluted with water to the mark,
Shake, the measured temperature of 25 ℃ ± 0.5 ℃.
The value of the specific rotation αm (25 ° C, D) is expressed by (°) · dm2 · kg-1, calculated according to the formula (A.2)
am (25 ° C, D) = α lρα
(A.2)
Where.
α - the measured angle of rotation, in degrees (°);
l - the length of the rotating tube in dm (dm);
ρα - Mass concentration of the effective components in solution, in grams per milliliter (g/mL).
A.5.2 Other according to GB/T 613.
A.6 Determination of arsenic
A.6.1 Weigh 1.0g of laboratory samples, accurate to 0.01g, into the arsenic device into the conical flask, add 5mL of water dissolved, add 1 drop
Bromophenol blue indicator solution (0.4g/L), dropping ammonia solution (14) and the solution was purple, replenishment to about 35mL, then add 20mL sulfur
Acid solution (1 5), shake, as the sample solution. Use Absorbent Solution B. Limit the preparation of standard solution. with a pipette to remove 2mL ±
0.02mL arsenic (As) standard solution (equivalent to 2.0μgAs), the same treatment with the same sample.
A.6.2 other according to GB/T 5009.76 diethylamino dithiocarbamate colorimetric method.
A.7 Determination of lead
A.7.1 Atomic Absorption Spectrometry
Specimen treatment according to GB/T 5009.75 dry digestion method. Others are carried out according to GB 5009.12.
A.7.2 Colorimetric method (arbitration law)
According to GB/T 5009.75. The sample treatment was carried out by dry digestion. Before use, 1mg/mL lead (Pb) standard solution dilute
Release 5 μg/mL lead (Pb) standard solution. Measure 25mL ± 0.02mL sample solution (equivalent to 2.5g laboratory samples
) And 1 mL of ± 0.02 mL lead (Pb) standard solution (equivalent to 5 μg of Pb) were placed in a 125 mL separatory funnel, respectively. Lead standard solution
Add 1% nitric acid solution to 25mL.
A.8 Determination of burning residue
Weigh about 4g of laboratory samples, accurate to 0.0001g. The burning temperature is 800 ° C ± 25 ° C. Other according to GB/T 9741.
The arithmetic mean of the results of two parallel measurements is the result of the report. The absolute difference between the two parallel determinations is not more than 0.01%.
A.9 Determination of dry reduction
Weigh about 2g of laboratory samples, accurate to 0.0002g. Others according to GB/T 6284. Keep some dry matter (this is dry
A) for the determination of L () - tartaric acid content.
The arithmetic mean of the results of two parallel measurements is the result of the report. The absolute difference between the two parallel determinations is not more than 0.05%.
A.10 oxalate test
A.10.1 Reagents and materials
A.10.1.1 Ammonia solution. 10%.
A.10.1.2 Calcium Sulfate Saturated Solution.
A.10.2 Analysis steps
Weigh about 1g of laboratory samples, accurate to 0.01g, dissolved in 10mL water, neutralized with ammonia solution to neutral, plus 10mL sulfur
Calcium saturated solution, shake after observation, shall not appear turbidity.
A.11 Sulfate test
A.11.1 Reagents and materials
A.11.1.1 hydrochloric acid solution. 1 4.
A.11.1.2 Barium chloride solution. Weigh 12g of BaCl2 · 2H2O in 100 mL of water.
A.11.2 Analysis steps
Weigh about 1g of laboratory samples, accurate to 0.01g, dissolved in 100mL water. Take 10 mL of this solution in a test tube and add 3 drops of salt
Acid solution and 1mL barium chloride solution, shake after observation, shall not appear turbidity.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 25545-2010_English be delivered?Answer: Upon your order, we will start to translate GB 25545-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 25545-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 25545-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|