HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (26 Oct 2025)

GB/T 24461-2023 English PDF

US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24461-2023: Technical requirements for luminaries used for cleanroom
Status: Valid

GB/T 24461: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 24461-2023English289 Add to Cart 3 days [Need to translate] Technical requirements for luminaries used for cleanroom Valid GB/T 24461-2023
GB 24461-2009English319 Add to Cart 3 days [Need to translate] [GB/T 24461-2009] Technical requirements for luminaries used in cleanroom Obsolete GB 24461-2009

PDF similar to GB/T 24461-2023


Standard similar to GB/T 24461-2023

GB/T 7000.204   GB/T 7000.201   GB/T 9473   GB/T 31728   GB 43472   

Basic data

Standard ID GB/T 24461-2023 (GB/T24461-2023)
Description (Translated English) Technical requirements for luminaries used for cleanroom
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K72
Classification of International Standard 29.140
Word Count Estimation 14,147
Date of Issue 2023-12-28
Date of Implementation 2024-07-01
Older Standard (superseded by this standard) GB/T 24461-2009
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 24461-2023: Technical requirements for luminaries used for cleanroom

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:140 CCSK72 National Standards of People's Republic of China Replace GB/T 24461-2009 Technical requirements for lamps for clean rooms Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General requirements 3 5 Technical requirements 3 5:1 Mark 3 5:2 Structure 3 5:3 Luminous maintenance life 4 5:4 Electromagnetic compatibility 4 5:5 Transient light artifacts 4 5:6 Brightness Limitation 4 6 Test methods 5 6:1 Mark 5 6:2 Structure 5 6:3 Luminous maintenance life 6 6:4 Electromagnetic compatibility 6 6:5 Transient light artifacts 6 6:6 Brightness Limitation 6 Reference 8

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 24461-2009 "Technical Requirements for Lamps for Clean Rooms": Compared with GB/T 24461-2009, except for structural adjustments In addition to general and editorial changes, the main technical changes are as follows: a) Modified the scope of application of the standard (see Chapter 1, Chapter 1 of the:2009 edition); b) Added five terms and definitions: "transient light artifact", "fluctuation depth", "flicker", "stroboscopic effect" and "lumen maintenance life" (see 3:6~ 3:10), the definitions of the four terms "clean room", "clean area", "cleanliness" and "clean room lamps" have been changed (see 3:1, 3:2, 3:4, 3:5,:2009 version 4:1, 4:2, 4:4, 4:5); c) Deleted the classification of lamps (see Chapter 5 of the:2009 edition), creepage distances and clearances (see Chapter 8 of the:2009 edition), and grounding regulations (see Chapter 9 of the:2009 edition), terminal blocks (see Chapter 10 of the:2009 edition), external wiring and internal wiring (see Chapter 11 of the:2009 edition), protection against electric shock (see Chapter 12 of the:2009 edition), durability test and thermal test (see Chapter 12 of the:2009 edition) Chapter 13 of the:2009 edition), dust protection, protection against solid foreign objects and water resistance (see Chapter 14 of the:2009 edition), insulation resistance and electrical strength (see Chapter 15 of the:2009 edition), heat resistance, fire resistance and marking resistance (see Chapter 16 of the:2009 edition); d) Changed the general requirements (see Chapter 4, Chapter 3 of the:2009 edition); e) Changed the relevant requirements for marking (see 5:1, Chapter 6 of the:2009 edition); f) Changed the relevant requirements for structure (see 5:2, Chapter 7 of the:2009 edition); g) Added requirements and test methods for luminous flux maintenance life (see 5:3 and 6:3); h) Added requirements and test methods for electromagnetic compatibility (see 5:4 and 6:4); i) Added requirements and test methods for transient optical artifacts (see 5:5 and 6:5); j) Added brightness limit requirements and test methods (see 5:6, 6:6): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Shanghai Quality Supervision and Inspection Technology Research Institute, Dongguan Zhonggong Tongming Optoelectronics Technology Co:, Ltd:, Jiangsu New Guanglian Optoelectronics Co:, Ltd:, Op Lighting Co:, Ltd:, Jiangsu Zhonggong Intelligent Optoelectronics Technology Co:, Ltd:, Shenzhen Shangwei Lighting Co:, Ltd: Division, Pujiang Sansi Optoelectronics Technology Co:, Ltd:, Suzhou Rongwen Cooper Lighting System Co:, Ltd:, Shanghai Times Lighting Electrical Inspection Co:, Ltd: Co:, Ltd:, Hangzhou Huapu Yongming Optoelectronics Co:, Ltd: The main drafters of this document: Xia Yu, Jiang Lili, Lu Shiming, Yang Yue, Shi Xiaohong, Zhang Fangzheng, Hua Lisheng, Zhao Jun, Zheng Chunhua, Zhang Wenhua, Wang Jinliang, Hou Ye, Chen Chaozhong: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 24461-2009 in:2009; ---This is the first revision: Technical requirements for lamps for clean rooms

1 Scope

This document specifies recessed luminaires for clean rooms and ceiling-mounted fixed luminaires that use electric light sources and have a power supply voltage not exceeding 1000V: The technical requirements for lamps (hereinafter referred to as "lamps") describe the corresponding test methods: This document applies to lamps installed in places with cleanliness requirements or similar places:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 2900:65 Electrical terminology lighting GB/T 7000:1-2023 Luminaires Part 1: General requirements and tests GB/T 7000:201 Luminaires Part 2-1: Fixed general purpose luminaires with special requirements GB/T 7000:202 Luminaires Part 2-2: Recessed luminaires with special requirements GB/T 9468 General requirements for goniophotometric measurement of lamps GB 17625:1 Electromagnetic compatibility limits Part 1: Harmonic current emission limits (Equipment input current ≤ 16A per phase) GB/T 17743 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 18595-2014 Electromagnetic compatibility and immunity requirements for general lighting equipment GB/T 25915:4-2010 Clean rooms and related controlled environments Part 4: Design, construction, start-up GB/T 31897:1 Lamp performance Part 1: General requirements GB/T 31897:201-2016 Lamp performance Part 2-1: Special requirements for LED lamps GB/T 33721-2017 Reliability test method for LED lamps GB 50034 architectural lighting design standards IEC TR61547-1:2017 Electromagnetic compatibility and immunity requirements for general lighting equipment Part 1: Objective light scintillator and voltage IEC TR63158 Objective test method for stroboscopic effect of lighting equipment for general lighting (Equipment for general IEEEStd1789-2015 IEEE recommended practices for high-brightness LEDs with adjustable current to reduce health risks to viewers

3 Terms and definitions

GB/T 7000:1-2023, GB/T 9468, GB/T 31897:1, GB/T 31897:201-2016, GB 50034 and The terms and definitions defined in GB/T 2900:65 and the following apply to this document:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24461-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24461-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24461-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24461-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 24461-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24461-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

Refund Policy     Privacy Policy     Terms of Service     Shipping Policy     Contact Information