|
US$769.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19652-2023: Discharge lamps (excluding fluorescent lamps) - Safety specifications
Status: Valid GB/T 19652: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19652-2023 | English | 769 |
Add to Cart
|
6 days [Need to translate]
|
Discharge lamps (excluding fluorescent lamps) - Safety specifications
| Valid |
GB/T 19652-2023
|
| GB 19652-2005 | English | 724 |
Add to Cart
|
4 days [Need to translate]
|
Discharge lamps (excluding fluorescent lamps) -- Safety specifications
| Valid |
GB 19652-2005
|
PDF similar to GB/T 19652-2023
Basic data | Standard ID | GB/T 19652-2023 (GB/T19652-2023) | | Description (Translated English) | Discharge lamps (excluding fluorescent lamps) - Safety specifications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K71 | | Classification of International Standard | 29.140.30 | | Word Count Estimation | 38,367 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2026-01-01 | | Older Standard (superseded by this standard) | GB 19652-2005 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 19652-2023: Discharge lamps (excluding fluorescent lamps) - Safety specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:140:30
CCSK71
National Standards of People's Republic of China
Replace GB 19652-2005
Discharge lamps (other than fluorescent lamps) safety regulations
(IEC 62035:2016, MOD)
Published on 2023-12-28
Implemented on 2026-01-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 General safety requirements 4
5 Special safety requirements 9
6 Lamp Design Information 9
7 Rating 10
Appendix A (Normative) List of Lamp Holders and Gauges 13
Appendix B (Normative) Symbol 14
Appendix C (Normative) Tensile force and torque test values 16
Appendix D (normative) Torque test seat 17
Appendix E (Normative) Thermal test data 19
Appendix F (normative) Measurement method of pulse height of lamps with internal starting device 20
Appendix G (Normative) Tolerance test procedure for metal halide lamps with quartz arc tubes 22
Appendix H (Normative) Tolerance test procedures for metal halide lamps with ceramic arc tubes 25
Appendix I (informative) Lamp design information 28
Appendix J (informative) Additional requirements for certification30
Appendix K (normative) Qualification conditions for type testing 34
Reference 35
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB 19652-2005 "Safety Requirements for Discharge Lamps (Except Fluorescent Lamps)": Compared with GB 19652-2005, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows:
---Changed the terminology of "UV Hazardous Efficacy of Photovisual Radiation", "Group", "Family", "Delivery Test" and "Metal Halide Lamp with Self-Protective Screen"
Righteousness (see Chapter 3, Chapter 3 of the:2005 edition);
---Changed the additional content of the logo (see 4:2:2, 4:2:2 of the:2005 version);
---Changed the requirements for creepage distance (see 4:3:1:2, 4:3:1:2 of the:2005 version);
---Added qualification inspection requirements for accidentally energized parts (see 4:4:1);
---Changed the corresponding requirements for insulation resistance (see 4:4:2, 4:4:2 of the:2005 edition);
---Changed the corresponding requirements for electrical strength (see 4:4:3,:2005 version of 4:4:3);
---Added photobiological requirements (see 4:6);
---Changed the special safety requirements for high-pressure sodium lamps and metal halide lamps (see Chapter 5, Chapter 5 of the:2005 edition);
---Added "Do not look at the light source symbol" (see Appendix B);
---Added "Tolerance Test Procedures for Metal Halide Lamps with Quartz Arc Tubes" and "Metal Halide Lamps with Ceramic Arc Tubes"
Tolerance test procedure” (see Appendix G, Appendix H):
This document is modified to adopt IEC 62035:2016 "Safety Specifications for Discharge Lamps (Except Fluorescent Lamps)":
Compared with IEC 62035:2016, this document has made the following structural adjustments:
---Appendix B corresponds to Appendix H in IEC 62035:2016;
---Appendix C corresponds to Appendix B in IEC 62035:2016;
---Appendix D corresponds to Appendix C in IEC 62035:2016;
---Appendix E corresponds to Appendix D in IEC 62035:2016;
---Appendix F corresponds to Appendix E in IEC 62035:2016;
---Appendix G corresponds to Appendix I in IEC 62035:2016;
---Appendix H corresponds to Appendix J in IEC 62035:2016;
---Appendix I corresponds to Appendix F in IEC 62035:2016;
---Appendix J corresponds to Appendix K in IEC 62035:2016;
---Appendix K corresponds to Appendix G of IEC 62035:2016:
The technical differences between this document and IEC 62035:2016 and their reasons are as follows:
---Replaced IEC 60598-1:2014 with GB/T 7000:1-2023, IEC 60598-1:2014 has been replaced (see Chapter 4);
---Replaced IEC TR62778:2012 with GB /Z 39942, and IEC TR62778 has been withdrawn (see 4:6:2):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Light Industry Federation:
This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224):
This document was drafted by: Hangzhou Huapu Yongming Optoelectronics Co:, Ltd:, Pros Electric (China) Co:, Ltd:, Hangzhou Times Lighting Electric Co:, Ltd:
Appliance Co:, Ltd:, Zhejiang Huapu Yongming Technology Co:, Ltd:, Deqing County Blue Bird Lighting Electric Co:, Ltd:, Guangdong Zhongliang Inspection Co:, Ltd:, Beijing
KYEC Light Source Research Institute Co:, Ltd:
The main drafters of this document: Xia Yu, Liu Kai, Yang Jianhu, Han Yanhua, Shen Jinxiang, Cai Zhe, and Wang Chong:
The previous versions of this document and the documents it replaces are as follows:
---First released in:2005 as GB 19652-2005;
---This is the first revision:
Discharge lamps (other than fluorescent lamps) safety regulations
1 Scope
This document specifies the safety requirements for discharge lamps (other than fluorescent lamps) for general lighting:
This document applies to low-pressure sodium lamps and high-intensity discharge lamps (HID), i:e: high-pressure mercury lamps (including hybrid lamps), high-pressure sodium lamps and metal halides
lamp: This document applies to both single-ended lamps and double-ended lamps: Appendix A lists the lamp holder models used:
This document only covers safety requirements and does not include performance requirements: For performance requirements, see IEC 60188, IEC 60192, IEC 60662,
IEC 61167 and IEC 61549:
Lamps complying with this document are rated at 90% to 110% of the rated supply voltage when equipped with corresponding ballasts, starting devices and lamps:
Work safely, with ballasts in accordance with the requirements of IEC 61347-2-9 and IEC 60923, and starting devices in accordance with IEC 61347-2-1 and
In accordance with the requirements of IEC 60927, the lamps shall comply with the requirements of GB/T 7000:1:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 7000:1-2023 Luminaires Part 1: General requirements and tests (IEC 60598-1:2020, MOD)
GB /Z 39942 applies GB/T 20145 to evaluate the blue light hazards of light sources and lamps (GB /Z 39942-2021, IEC TR62778:
2014,IDT)
ISO 4046-4 Glossary of paper, paperboard, pulp and related terms Part 4: Paper and paperboard grades and processed products (Paper,
lary(IEV)-Part 845:Lighting]
Note: GB/T 2900:65-2023 Electrical Terminology Lighting (IEC 60050-845:2020, IDT)
IEC 60061-1 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 1: Lampcaps and
Note: GB/T 1406 (all parts) Type and size of lamp holder (IEC 60061-1)
IEC 60061-3 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 3: Gauges (Lampcapsand
Note: GB/T 1483 (all parts) Inspection gauge for lamp holders and lamp holders (IEC 60061-3)
IEC 60061-4 Lamp caps, lampholders and test standards for interchangeability and safety - Part 4: Guidance and general information (Lamp
Note: GB/T 21098-2022 Lamp caps, lamp holders and gauges for testing their safety and interchangeability Part 4: Guidelines and general information (IEC 60061-4:
2018,IDT)
Note: GB/T 13259-2021 High-pressure sodium lamp performance requirements (IEC 60662:2011, NEQ)
IEC 60695-2-10 Fire hazard test Part 2-10: Glow wire/hot wire basic test method Glow wire device and general test
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19652-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 19652-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 19652-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19652-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 19652-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19652-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|