Path:
Home >
GB >
Page24 > GB 1886.135-2015
Home >
Standard_List >
GB >
Page24 > GB 1886.135-2015
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 1886.135-2015 | English | 129 |
Add to Cart
|
3 days [Need to translate]
|
National Food Safety Standard -- Food Additives -- Benzyl alcohol
| Valid |
GB 1886.135-2015
|
PDF similar to GB 1886.135-2015
Basic data
| Standard ID | GB 1886.135-2015 (GB1886.135-2015) |
| Description (Translated English) | National Food Safety Standard -- Food Additives -- Benzyl alcohol |
| Sector / Industry | National Standard |
| Classification of Chinese Standard | X40 |
| Word Count Estimation | 6,654 |
| Date of Issue | 2015-09-22 |
| Date of Implementation | 2016-03-22 |
| Regulation (derived from) | PRC National Health and Family Planning Commission 2015 No.8 |
| Issuing agency(ies) | National Health and Family Planning Commission of the People's Republic of China |
GB 1886.135-2015: National Food Safety Standard -- Food Additives -- Benzyl alcohol
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives, benzyl alcohol)
National Standards of People's Republic of China
National Food Safety Standard
Food Additives benzyl alcohol
Issued on. 2015-09-22
2016-03-22 implementation
People's Republic of China
National Health and Family Planning Commission released
National Food Safety Standard
Food Additives benzyl alcohol
1 Scope
This standard applies to benzaldehyde or benzyl chloride as raw materials by a chemical reaction of benzyl alcohol food additive.
2 chemical name, molecular formula, molecular mass and structural formula
2.1 Chemical Name
Benzyl alcohol
Formula 2.2
C7H8O
2.3 formula
2.4 relative molecular mass
108.14 (according to 2007 international relative atomic mass)
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall comply with the requirements of Table 1.
Table 1 Sensory requirements
Project requires test methods
Color colorless
Liquid state
The sample was placed in a cuvette, were visually observed
Faint aroma of fragrant, fruity aroma GB/T 14454.2
3.2 Physical and Chemical Indicators
Physical and chemical indicators should be consistent with the provisions of Table 2.
Table 2. Physical and chemical indicators
Item Index Test Method
Solubility (25 ℃) 1mL whole sample was dissolved in 30mL distilled water GB/T 14455.3
Methanol content of benzene, w /% ≥ 98.0 Appendix A
Acid value (in dollars KOH)/(mg/g) ≤ 0.5 GB/T 14455.5
Refractive index (20 ℃) 1.5360 ~ 1.5410 GB/T 14454.4
The relative density (25 ℃/25 ℃) 1.042 ~ 1.047 GB/T 11540
Chlorine-containing compounds by testing GB/T 14454.12
Appendix A
Determination of benzyl alcohol content
A.1 instruments and equipment
A.1.1 chromatograph. According to GB/T 11538-2006 provisions in Chapter 5.
A.1.2 Column. capillary column.
A.1.3 Detector. Hydrogen flame ionization detector.
A.2 Determination
Area normalization method. According to GB/T 11538-2006 10.4 Determination.
A.3 repeatability and results are shown
Performed according to GB/T 11538-2006 11.4 provisions.
Food Additives Benzyl alcohol gas chromatograph (area normalization method) See Appendix B.
Appendix B
Food Additives Benzyl alcohol gas chromatogram
(Area normalization method)
B.1 food additives benzyl alcohol gas chromatogram
Food Additives benzyl alcohol by gas chromatography is shown in Figure B.1.
Figure B.1 food additives benzyl alcohol gas chromatogram
B.2 operating conditions
B.2.1 Column. capillary column length 30m, an inner diameter of 0.32mm.
B.2.2 stationary phase. 5% phenyl methyl polysiloxane.
B.2.3 film thickness. 0.25μm.
B.2.4 chromatography oven temperature. linear temperature programmed from 60 ℃ ~ 120 ℃, the rate of 3 ℃/min; then linear temperature program from 120 ℃ ~ 250 ℃,
Rate of 10 ℃/min.
B.2.5 Inlet temperature. 250 ℃.
B.2.6 detector temperature. 250 ℃.
B.2.7 Detector. Hydrogen flame ionization detector.
B.2.8 carrier gas. nitrogen.
B.2.9 carrier gas flow rate. 1mL/min.
B.2.10 Injection volume. about 0.2μL.
B.2.11 Split ratio. 100.1.
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 1886.135-2015_English be delivered?
Answer: Upon your order, we will start to translate GB 1886.135-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 1886.135-2015_English with my colleagues?
Answer: Yes. The purchased PDF of GB 1886.135-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.