HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 17465.3-2008 English PDF

US$729.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17465.3-2008: [GB/T 17465.3-2008] Appliance couplers for household and similar general purposes -- Part 2: Appliance couplers with a degree of protection higher than IPX0
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 17465.3-2008English729 Add to Cart 5 days [Need to translate] [GB/T 17465.3-2008] Appliance couplers for household and similar general purposes -- Part 2: Appliance couplers with a degree of protection higher than IPX0 Valid GB 17465.3-2008

PDF similar to GB 17465.3-2008


Standard similar to GB 17465.3-2008

GB/T 4343.2   GB/T 3883.311   JB/T 10772   GB/T 17465.6   GB/T 17465.1   GB/T 17465.5   

Basic data

Standard ID GB 17465.3-2008 (GB17465.3-2008)
Description (Translated English) [GB/T 17465.3-2008] Appliance couplers for household and similar general purposes -- Part 2: Appliance couplers with a degree of protection higher than IPX0
Sector / Industry National Standard
Classification of Chinese Standard K65
Classification of International Standard 29.120.30
Word Count Estimation 28,210
Date of Issue 2008-12-30
Date of Implementation 2010-02-01
Quoted Standard GB 17465.1; GB 4208
Regulation (derived from) Announcement of Newly Approved National Standards No. 26 of 2008 (total 139)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard applies to: for cold conditions, the water level is higher than IPXO AC plug bipolar irreversible appliance couplers, used in rated voltage not exceeding 250V, rated current not exceeding 10A, frequency of 50Hz or 60Hz AC power. Circular cross-section is used to connect the power cord to the domestic, commercial and light industrial use class �� appliances. Note 1: GB 17465. 1 comments in this entry apply. Note 2

GB 17465.3-2008: [GB/T 17465.3-2008] Appliance couplers for household and similar general purposes -- Part 2: Appliance couplers with a degree of protection higher than IPX0


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Appliance couplers for household and similar general purposes.Part 2. Appliance couplers with a degree of protection higher than IPX0 ICS 29.120.30 K65 National Standards of People's Republic of China GB 17465.3-2008/IEC 60320-2-3.2005 Household and similar appliances couplers Part 2. The degree of protection higher than IPX0 Appliance couplers (IEC 60320-2-3.2005, IDT) Posted 2008-12-30 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ IEC Foreword Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 2 General requirements 5 General notes 2 6 Standard Rating 2 7 Category 3 8 mark 3 9 Dimensions and interchangeability 4 10 5 Protection against electric shock 11 grounding 5 12 Terminals and terminations 5 13 Structure 5 14 moisture 6 15 Insulation resistance and electric strength 7 16 connector insertion and removal force required 8 8 work 17 contacts 18 for hot conditions or appliance couplers for very hot conditions the heat resistance of 8 19 Breaking capacity 8 20 Normal operation 8 21 temperature 9 22 and its connecting cord 9 Mechanical strength 23 10 24 heat-resistant and anti-aging properties 11 25 Screws, current-carrying parts and connections 11 26 creepage distances, clearances and distances through insulation 12 27 heat-resistant insulating material, fire resistance and electrical traces of 12 28 rust 12 29 Electromagnetic compatibility (EMC) requirements 12 Appendix A (informative) factory wired appliance couplers routine tests related to safety (electric shock Protection and correct polarity) 13 10A250V Connectors Standard Binder A IPX4 degree of protection for cold conditions Ⅱ type of equipment 14 10A250V appliance for standard sheet B IPX4 degree of protection for cold conditions Ⅱ class device input receptacle 15 Standard Binder C for cold conditions Ⅱ type of equipment IPX4 degree of protection 6A250V connector 18 IPX4 degree of protection 6A250V appliance standard sheets D used for cold conditions Ⅱ class equipment input socket 19 GB 17465.3-2008/IEC 60320-2-3.2005

Foreword

All technical content in this section is mandatory. GB 17465 "Household and similar appliances couplers" is divided into the following sections. Part 1. General requirements (GB 17465.1) Part 2. Particular requirements (GB 17465.2 ~ 17465.4) --- Household and similar equipment interconnection couplers; --- Protection higher than IPX0 appliance couplers; --- Appliance weight for engagement by the coupler. This section GB 17465 Part 2. protection higher than IPX0 appliance coupler. This section identical with IEC 60320-2-3.2005 Part (Version 1.1) "Household and similar appliances couplers 2-3. Protection Grades higher than IPX0 appliance couplers "and Amendment 1.2004. This section should be used in conjunction with the GB 17465.1. Appendix A of this section is an informative annex. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized. This section drafted by. Bureau of Technical Supervision Guangzhou electrical safety testing, China Electric Apparatus Research Institute, the Guangdong quality supervision Governor Inspection Center, is Granville Technology (Shenzhen) Co., Futaike - LTK Co., Chaozhou City Chaohui Electronics Co., Ltd. Guangzhou, and Chang Electric Co., Ltd., Ningbo Economic and Technological Development Zone Haixin Electric Technology Co., Ltd. The main drafters of this section. Huanghai Kun Wen Yong Choi, Luohuai Ping, Bao Qiuping, Reallize Luo Zhi deposit, Lili Jiang, Li Xiaoliang, thanks Ke Long. GB 17465.3-2008/IEC 60320-2-3.2005 IEC Foreword 1) IEC (International Electrotechnical Commission) is composed of national Electrotechnical Commission (IEC National Committees) worldwide standardization groups Organizations. The object of IEC is to promote international cooperation in the field of standardization and related electrical and electronic problems. For this purpose, IEC In addition to other activities, but also publishes International Standards. Their preparation is entrusted to technical committees complete of. Member of IEC National Committees, as long as the standard to be developed are interested may participate in this preparatory work. With IEC Linked international official organizations are also involved in the development of standards. IEC and the World Organization for Standardization (ISO ) in accordance with Conditions of agreement between the two closely. 2) since each technical committee has representatives from the National Commission on the relevant issues of interest, so the IEC on technical The formal decisions or agreements in question are the maximum expression of the international consensus on the relevant issues. 3) documents generated in the form of recommendations for international use, and standards, technical specifications, technical reports or guidelines published in the form, And National Committees in that sense of acceptance. 4) In order to promote international unification, IEC National Committees in charge of the IEC international standards transparently converted to the maximum extent possible National or regional standards. Between the IEC Standard and the corresponding national or regional standard if there is any difference, it should be converted into the standard After clearly illustrates. 5) IEC did not develop any signs of approval procedures. When a device is declared if it complies with one of its standards of IEC , IEC this Irresponsible. 6) All users should ensure that they should have the latest version. 7) whether and when and where the direct or indirect, or use or publication or other means of the IEC and the IEC publication Publication costs incurred (including legal fees) and expenses, IEC or its directors, employees, servants or agents (including Individual experts and members of the Technical Committee) and IEC National Committees no obligation for any personal loss, property damage or its He is responsible for losses due to natural causes. 8) Note that this publication cited normative references. In order to accurately use of this publication, a reference to the relevant publications is indispensable Less. 9) Note IEC publication may be involved in some of the patents subject ingredients. IEC has no obligation to determine whether any or all of these patent. International Standard IEC 60320-2-3 by TC23. Electrical accessories Technical Committee in SC23G. Appliance couplers Technical Committee customized. This version is the first edition of IEC 60320-2-3 (1998) [documents 23G/185/FDIS and 23G/188/RVD] and its revisions (2004) [documents 23G/243/FDIS and 23G/249/RVD] on the basis of complete consolidation. This version number is 1.1. Vertical line indicates where the edge of the Rev. 1 compared with the original version to make changes. This Part 2 shall IEC 60320-1. conjunction. "General requirements for household and similar appliances couplers Part 1." it Is based on the first edition of IEC 60320-1 (1994) and Rev. 1 (1995) and 2 (1996) on. The provisions of this standard supplement or modify the corresponding provisions in IEC 60320-1. Reg Part 1 Where in this standard are applicable not mentioned. IEC 60320-1 clause will continue to apply without any modification. Where in this standard marked "increase", "modification" or "replacement" of the content of the IEC 60320-1 related technical requirements, test specifications or Comments, etc. should be altered accordingly. Section 1 sub-clause does not have numbered starting from 101. Appendix A is merely informative appendix. GB 17465.3-2008/IEC 60320-2-3.2005 Household and similar appliances couplers Part 2. The degree of protection higher than IPX0 Appliance couplers

1 Scope

GB 17465.1 This chapter is intended to make the following revised. This section applies to. --- For cold conditions, the water level is higher than IPX0 AC plug poles irreversible appliance coupler used for rated voltage not exceeding Over 250V, rated current not exceeding 10A, on a frequency of 50Hz or 60Hz AC power. For the circular cross-section Connect the power cord to the Ⅱ class household appliances, commercial and light industrial use. Note 1. GB 17465.1 of note for this entry. Note 2. GB 17465.1 of note for this entry. Note 3. GB 17465.1 of note for this entry. Note 4. GB 17465.1 comments in this entry do not apply. Note 5. GB 17465.1 of note for this entry. Add notes. Note 6. GB 4208 provides for prevention of harmful water level of protection; Note 7. IEC 60536 specifies the classification of the device.

2 Normative references

The following documents contain provisions which, through reference in this Part of GB 17465, constitute provisions of this part. Cited documents dated, its All subsequent amendments (not including errata content) or revisions do not apply to this section, however, encourage each agreement under this section Are Prescriptions can use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 17465.1 Chapter 2 applies and adds the following references. GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT)

3 Terms and Definitions

GB 17465.1 Chapter applies and adds the following definition. 3.101 Securing the appliance to the cord or cable input jack on the device used. 3.102 When the attachments as normal or according to the following conditions. a) For Connectors. not cooperating with the mating electrical accessories, but the opening position with cover; b) For plug connectors and appliance inlets. the mating electrical accessories mating in the most unfavorable level, the contacts (plug and plug Generated between sets) electrical contact. With GB 17465.1 shown in FIG. 10 refers to the test surface attachment can be touched. 3.103 In normal circumstances the use of accessory parts that can be touched, with only the tools to dismantle, but without the use of tools to open. GB 17465.3-2008/IEC 60320-2-3.2005 3.104 For one or more samples for type testing.

4 General requirements

GB 17465.1 chapter applies. General Description 5 tests GB 17465.1 make the following revised chapter apply. 5.1 GB 17465.1 section applies. 5.2 Replacement. Unless otherwise specified, the sample according to the delivery status and normal usage, at an ambient temperature within the range of 20 ℃ ± 5 ℃, frequency AC 50Hz or 60Hz to be tested. Test specimen shall be consistent with the general on all products that may affect the test results in detail. Non-rewirable accessories shall be provided with at least electrical cord 1m long test. Rewirable electrical accessories application complies with GB 5023 Sheath-core round cord tested, unless otherwise specified in specific terms. 5.3 GB 17465.1 This section does not apply. 5.4 GB 17465.1 This section does not apply. 5.5 Replacement. The total number of samples is 18, any type of sample in the table below shall be inspected and tested. Number of samples tested Test order (Related to the terms and sub-clause) 1. Inspection and by manual examination 3 7,8,9,10,12,13,24.1,25,26,28 2. Usually test 314 (except 14.101), 15 3. Usually test 322 (except 22.4), 16,17,19,20,21 4. Bending Test 3 22.4 5. Material Testing 3 23,24.2,14.101,15.3 6. Material Testing 3 24.2,27 Note 1. In the specified test sequence, if there are special repeat test, which requires the corresponding provisions in the existing regulations. Note 2. If agreed by the manufacturer for the same set of samples can be used for multiple test sequence. 5.6 GB 17465.1 section applies. 5.7 Replacement. If the sample does not fail in a series of tests according to the provisions of 5.5, it is that such electrical accessories meet the requirements of the standard. If any group has a series of sample tests specified in 5.5 fail, then that such non-compliant electrical accessories Requirements, unless it can show that this type of product in general or non-electrical accessories design, this case should provide more than a sample group were in the group one Or more tests. If the retest is no failure, then that such electrical accessories to meet the requirements of this section. If more than one sample failed to pass the test all the items shown in 5.5, depending on the kind of electrical accessories do not meet the requirements of this standard.

6 Standard ratings

GB 17465.1 make the following revised chapter apply. 6.1 GB 17465.1 section applies. 6.2 Replacement. GB 17465.3-2008/IEC 60320-2-3.2005 Rated current of 6A or 10A. Category 7 GB 17465.1 This chapter is intended to make the following revised. 7.1.1 Review. Only for appliance couplers for cold conditions. 7.1.2 Review. Only for appliance couplers for class Ⅱ device. 7.2 Replacement. Electrical accessories according to the connection method cord Category. --- Rewirable electrical accessories; --- Non-rewirable electrical accessories. Increase in sub-clause. 7.101 add a new classification. Electrical accessories according to ambient temperature used Category. --- Room temperature using the appliance couplers; --- Appliance couplers at low temperature (-15 ℃) conditions of use. Note. Additional testing appliance couplers under low temperature conditions are under consideration.

8 flag

GB 17465.1 make the following revised chapter apply. 8.1 Replacement. Couplers, in addition to the equipment supplied with the appliance inlet, the flag should be as follows. a) manufacturer or vendor name, trademark or identification mark; b) This part of the standard number; c) rated current; d) rated voltage; e) symbol for nature of supply; f) IP rating; g) model, can be a catalog number, code number and so on. 8.2 Replacement. Appliance inlets shall be marked with 8.1a) and 8.1g information shown), when the outdoor installation, without this flag visible. NOTE. When inserted timely, connectors and appliance socket without input flag visible. 8.3 GB 17465.1 section applies. 8.4 GB 17465.1 increased under this section apply with the following symbols. Phase line L Neutral N Splash protection class IPX4 NOTE. The IP code indicates the anti-solid foreign objects into the letters X, replaced with the relevant figures. 8.5 GB 17465.1 This section does not apply. 8.6 Review. GB 17465.1 section applies, with the exception of the ground terminal and ground contacts. 8.7 GB 17465.1 section applies. GB 17465.3-2008/IEC 60320-2-3.2005 8.8 GB 17465.1 section applies. increase. 8.101 rewirable cord electrical accessories or flexible cables should not be black, green, white or brown. 8.102 for a predetermined coupler sold separately, the manufacturer shall provide on each coupler or electrical accessories sales package or inside said Specification, clear instructions are for outdoor use area, suitable climatic conditions and alert the user should not be black, green, white or brown Color wires connected to the use of electrical accessories. The instructions shall explain the plug connector should be connected to the device, the connector should be connected to the mains. If you are not disconnect coupler or electrical accessories, at the free end of the appliance should be connected to the main power supply or signs, and description to avoid Free incorrect connection or is linked to the need to protect the continuity of the grounding wire on the appliance dangerous. Unless the plug connector or appliance inlet line is brought directly to the manufacturer for installation on other equipment, then such group The free end of the member shall be accompanied by the following tags. This cord electrical accessories must be charged before the appliance is connected to the device. If stitches are coupler or electrical accessories, you should have the following explanation. a) length should be stripped of sheathing and insulation; b) electrical accessories should be connected to the main power supply or the appliance identification; c) Brown wire connection terminals shall be marked L, blue cable terminal connector should be marked N; d) the importance of correct assembly line hoop, including the sheath must have at least 3mm beyond the clamping device; e) applies only to connection circular cross-section wires. By checking to determine whether compliance with the requirements of 8.101 and 8.102.

9 Dimensions and interchangeability

GB 17465.1 make the following revised chapter apply. 9.1 Replacement. Coupler shall comply with the dimensional requirements shown in the following table corresponds to the standard sheets, excluding 9.6 permitted. Ratings connector standard sheet input socket standard sheet 6A C D 10A A B Compliance is checked by measurement and inspection using the associated gauge. When the amount of use as shown in Fig. 1 or 1A regulation, fully inserted gauge the force can not exceed 60N. To verify correct and fully inserted, the gauges should be equipped with perforations. When used as shown in FIGS. 2 and 2A through the primary and secondary regulations through regulation, the regulation is fully inserted through the primary appliance input power socket should not exceed 60N, the auxiliary through regulations pushed through over the cross bar. With the length of the main plane through regulation and inspection plug housing; mating with external auxiliary through compliance checks appliance inlet recess. 9.2 Replacement. Means for holding the connector plug connector and appliance inlet shall comply with the requirements of Standard Binder A and B. Compliance is checked by Chapter 16 of the test examination. 9.3 GB 17465.1 section applies. 9.4 Replacement. Connector --- Ⅱ type of equipment should not be used for input devices and other appliances receptacle mating. --- 6A connector should not be mated with 10A socket. Compliance is checked by inspection, by manual test and corresponding gauge inspection. Testing should be at an ambient temperature of 40 ℃ ± 2 ℃ conditions, all electrical accessories and gauges should be at this temperature. 9.5 GB 17465.1 section applies. GB 17465.3-2008/IEC 60320-2-3.2005 9.6 GB 17465.1 section applies. 10 Protection against electric shock GB 17465.1 make the following revised chapter apply. 10.1 Replacement. Appliance couplers are designed to be able to do. When the appliance inlet connector plug part or all of timeliness, the appliance inlet is charged Member is not accessible. Connectors should be designed to. when the connector normal use properly installed and the lid open after the live parts should not be touched. Compliance is checked by inspection and, if necessary, using a standard 10 shown in FIG. GB 17465.1 test finger test examination. The test finger touch Touch every possible position, and power indicator to show that it is in contact with the unit under test. For the cage with a rubber or thermoplastic material, Housing or the connector body, the standard test finger on all the points with force 20N ± 3N touch insulating material such as deformation will affect safety 30s ± 5s, the test carried out at an ambient temperature of 40 ℃ ± 2 ℃ conditions. Note 1. The voltage between 40V ~ 50V power indicator to show exposure-related site. Note 2. consistency with the standard chart to be compliant in connector into the appliance inlet process, the reach of the contact element requirements. 10.2 GB 17465.1 section applies. 10.3 GB 17465.1 section applies. 10.4 GB 17465.1 section applies. 11 earthing GB 17465.1 This chapter does not apply. 12 Terminals and terminations GB 17465.1 make the following revised chapter apply. 12.1 General requirements Requirements of this section apply only to the connector and plug connector. Is not installed on the appliance or equipment or integrally formed with the device or appliance submitted independent appliance inlet, you need special requirements. Installed in the equipment or apparatus, or formed integrally with the equipment or appliances appliance inlet shall comply with the relevant national standards of the device The requirements. 12.2 GB 17465.1 section applies. 12.3 GB 17465.1 section applies. 12.4 GB 17465.1 section applies. 12.5 GB 17465.1 This section does not apply. 13 Structure GB 17465.1 make the following revised chapter apply. 13.1 GB 17465.1 This section does not apply. 13.2 GB 17465.1 section applies. 13.3 GB 17465.1 section applies. 13.4 GB 17465.1 section applies. 13.5 Replacement. Connector plug sets shall be automatically adjusted to provide sufficient contact pressure. Compliance is checked by inspection and using FIG pull force gauge to check each individual phase and neutral plug housing (4) in order to ensure that the connection to the housing Cover does not affect the test results. Connectors remain vertical, vertical gauge hanging down, during the test, the connector plug should cover at least the gauge protection GB 17465.3-2008/IEC 60320-2-3.2005 Hold 30s. Insert set automatic adjustment should not rely on an insulating material elasticity. 13.6 GB 17465.1 regulation applies to all Rewirable electrical accessories. Can be stitches housing electrical accessories should be one or more components, and should completely surround the terminals and the ends of the cord. Note. a housing member connected by a flexible connection, it can be seen as a separate component. Its structure is. from the point of separation from the core, the wire can be properly connected, and when the normal use of electrical accessories for assembly and wiring, not Shall have the following hazards. --- Cores mutually pressed together; --- Core accessible metal surfaces in contact with; --- Core line of contact with other live parts. 13.7 GB 17465.1 section applies. 13.8 GB 17465.1 This section applies to the connector and plug connector. 13.9 GB 17465.1 This section does not apply. 13.10 GB 17465.1 This section applies to the connector and plug connector. 13.11 GB 17465.1 This section does not apply. 13.12 GB 17465.1 section applies. Addition of provisions. 13.101 When the appliance inlet plug connector and the connector is fully inserted electrical accessories and supporting timely, couplers shall ensure to achieve Prevention of harmful water level devices. Compliance is checked by inspection and test check of 14.101. 13.102 with a cable or plug connector in normal use, and when not supporting the timely insertion of electrical accessories, should meet 10th Chapter 14.101 requirements. 13.103 supporting the electrical accessories when not in position, the connector cover should be provided in order to reach moisture protection rating. Lid closed and automatically Securely fixed on the connector. Meets the requirements of 13.102 and 13.103, and by Chapter 10, Chapter 20, Chapter 23, Chapter 28 and 14.101 Test an examination. 13.104 installed in the equipment or appliances or equipment or appliances are formed integrally with the appliance inlet openings from the contact surface to the terminal Or lugs, should ensure that measures against harmful ingress of water to meet the grade requirements. Installed in the device can not disconnect the plug connector should be equipped with at least 500mm of cord or soft rope (into the plug connector from the cord The entry point for the amount of cord entry point play equipment). Compliance is checked by inspection and test check of 14.101. 13.105 is equipped with the normal case of using cord connector, such as a spring-loaded cover, when not mated supporting electrical accessories should have sufficient Enough strength Now the lid is closed, open angle and closed under normal circumstances, the action can not be less than 90 °, and no more than 100 °. Cover and Associated spring, if any, should be able to withstand the lid opened to the maximum extent of the damage and should be corrosion-resistant material. Compliance is checked by inspection and test of 13.105.1 inspection. After the test, the lid should be closed in the circumstances of this section requires. It meets the requirements of corrosion-resistant materials, by checking the test 28.1. 13.105.1 under the action of the spring, to 15 ± 2 beats/min at a rate cap in order fully opened and closed 4,000 times. 14 proof GB 17465.1 make the following revised chapter apply. The sixth paragraph should read. Samples stored in a humid box 168h (7 days). Addition of provisions. 14.101 electrical accessor...

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 17465.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 17465.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 17465.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 17465.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.