GB 17465.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 17465.2-2009 | English | RFQ |
ASK
|
6 days [Need to translate]
|
[GB/T 17465.2-2009] Appliance couplers for household and similar general purposes -- Part 2: Interconnection couplers for household and similar equipment
| Obsolete |
GB 17465.2-2009
|
| GB 17465.2-1998 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Appliance couplers for household and similar general purposes. Part 2: Interconnection couplers for household and similar equipment
| Obsolete |
GB 17465.2-1998
|
PDF similar to GB 17465.2-2009
Basic data | Standard ID | GB 17465.2-2009 (GB17465.2-2009) | | Description (Translated English) | [GB/T 17465.2-2009] Appliance couplers for household and similar general purposes -- Part 2: Interconnection couplers for household and similar equipment | | Sector / Industry | National Standard | | Classification of Chinese Standard | K65 | | Classification of International Standard | 29.120.30 | | Word Count Estimation | 35,369 | | Date of Issue | 2009-09-30 | | Date of Implementation | 2010-06-01 | | Older Standard (superseded by this standard) | GB 17465.2-1998 | | Quoted Standard | GB/T 1182; GB 17465.1-2009; IEC/TR 60083-1997; IEC 60906 | | Adopted Standard | IEC 60320-2-2-1998, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2009 (No. 150 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard applies to household and similar appliances or equipment, communication poles, with or without ground contacts ground contacts Interconnection couplers, used at the rated voltage not exceeding 250 V, rated current not exceeding 16 A, M (rate of 50 Hz or 60 Hz AC power, the power coupler is used to interconnect to its matching electrical appliances or equipment. | GB 17465.2-2009: [GB/T 17465.2-2009] Appliance couplers for household and similar general purposes -- Part 2: Interconnection couplers for household and similar equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Appliance couplers for household and similar general purposes.Part 2. Interconnection couplers for household and similar equipment
ICS 29.120.30
K65
National Standards of People's Republic of China
Replacing GB 17465.2-1998
Household and similar appliances couplers
Part 2. Household and similar equipment interconnection couplers
(IEC 60320-2-2.1998, MOD)
Posted 2009-09-30
2010-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 General requirements
5 General notes 2
6 Standard Rating 2
7 Category 2
8 mark 3
9 Dimensions and interchangeability 4
10 5 Protection against electric shock
11 grounding 5
12 Terminals and terminations 5
13 Structure 6
14 moisture 7
15 Insulation resistance and electric strength 7
16 connector insertion and removal force required 7
8 work 17 contacts
18 for hot conditions or appliance couplers for very hot conditions the heat resistance of 8
19 Breaking capacity 8
20 Normal operation 9
21 temperature 9
22 and its connecting cord 10
Mechanical strength 23 10
24 heat-resistant and anti-aging properties 11
25 Screws, current-carrying parts and connections 11
26 creepage distances, clearances and distances through insulation 11
27 heat-resistant insulating material, fire resistance and electrical traces of 12
28 rust 12
29 Electromagnetic compatibility (EMC) requirements 12
Standard Binder Class A Ⅰ equipment 2.5A plug connector (limited to non-rewirable type) 13
Standard Binder Class B Ⅰ equipment 2.5A appliance outlet 14
Binder C Ⅱ class standard equipment 2.5A plug connector (limited to non-rewirable type) 15
Standard sheets D Ⅱ class equipment 2.5A appliance outlet 16
E Ⅰ standard sheet-type device with a 10A plug connector 17
Standard sheet Class F Ⅰ equipment 10A appliance outlet 18
Standard leaflet G Ⅱ class equipment 10A plug connector (limited to non-rewirable type) 19
Standard sheet H Ⅱ class equipment 10A appliance outlet 20
Standard sheet Class I Ⅰ equipment 16A plug connector 21
Standard Binder Class J Ⅰ equipment 16A appliance outlet 22
Binder K Ⅱ class standard equipment 16A plug connector 23
Standard sheet L Ⅱ class equipment 16A appliance outlet 24
Foreword
GB 17465 all the technical content of this section is mandatory.
GB 17465 "Household and similar appliances couplers" is divided into the following sections.
Part 1. General requirements (GB 17465.1)
Part 2. Particular requirements (GB 17465.2 ~ GB 17465.4)
--- Household and similar equipment Interconnection couplers
--- Protection higher than IPX0 appliance couplers
--- Appliance weight for engagement by a coupler
This section GB 17465 Part 2 for household and similar equipment interconnection couplers. This section should cooperate with the GB 17465.1
use.
The partial modification of the use of IEC 60320-2-2.1998 Part (2nd Edition) "Household and similar appliances couplers 2-2. Household and
Similar equipment interconnection couplers General requirements. "
IEC 60320-2-2.1998 with the IEC 60320-1.1994 (first edition) supporting the use. Since the revised IEC standard speed,
According to the national standard GB 17465.1-2009 has IEC 60320-1.2007 (Version 2.1) revision, so there use different versions of the problem,
To make the series of standards supporting the use of more sophisticated, reasonable and based on this part of IEC 60320-1.2007 modification using IEC 60320-2-
2.1998.
This part of IEC 60320-2-2.1998 The main differences are as follows.
1) on the use of ambient temperature.
Some areas of the subtropical climate, high ambient temperature, according to China's geographical and climatic features in this section Regulation
Fixed interconnection couplers ambient temperature "usually not more than 35 ℃, but occasionally reach 40 ℃". IEC 60320-2-2 in Regulation
Fixed. Interconnection couplers operating ambient temperature "usually not more than 25 ℃, but occasionally reach 35 ℃".
2) In order to correspond with GB 17465.1-2009 standard, 8.6 ground terminal symbols, increase circled ground symbol.
3) In order to correspond with GB 17465.1-2009 standards and comply with the basic principles of product testing, increasing 16.3, the minimum withdrawal force
Test method to assess a single pin gauge.
4) According to GB/T 5023-2008 "rated voltage 450/750V and below PVC insulated cables," the provisions of the cord type
As 60227IEC 53 of 3 × 0.75mm2, the maximum diameter of 8.0mm to 7.6mm; 3 × 1.0mm2, the maximum diameter
The 8.4mm to 8.0mm; 3 × 1.5mm2, by the maximum diameter of 9.8mm to 9.4mm.
5) According to GB/T 5013-2008 "rated voltage 450/750V and below rubber insulated cables," the provisions of the cord of type
60245IEC 53 of 3 × 0.75mm2, the maximum diameter of 8.8mm to 8.1mm; 3 × 1.0mm2, by the maximum diameter
9.2mm to 8.5mm; 3 × 1.5mm2, by the maximum diameter of 11.0mm to 10.4mm.
6) Because IEC 60536.1997 corresponding to our standard GB/T 12501-1990 been set aside, and just 7.1 in this section
Note that the reference standard, delete the IEC 60320-2-2.1998 in reference to the standard IEC 60536.1997, delete
7.1 NOTE provisions.
The standard page is just 7.1 Note.
This Part replaces GB 17465.2-1998 "the second part of appliance couplers for household and similar purposes. Household and similar equipment interoperability
Even coupler. "
This section compared with GB 17465.2-1998, the main changes are as follows.
1) In order to facilitate to find and use, modify GB 17465.2-1998 standard sheet number name, according to IEC 60320-2-2.
1998 standard sheet attached to the name are numbered.
2) Chapter 3, delete the words "interconnection cable assembly" definition, the product cord set into the GB 15934 standards, this section
All details about the interconnection wire assembly moved in GB 15934.
3) In order to correspond with GB 17465.1-2009 standard, 8.6 ground terminal symbols, increase circled ground symbol.
4) In order to correspond with GB 17465.1-2009 standard, Chapter 15, Note 1, "the body" interpretation of the word to delete "a ground terminal, connected
To plug or ground contact. "
5) In order to correspond with GB 17465.1-2009 standards and comply with the basic principles of product testing, increasing 16.3, the minimum withdrawal force
Test method to assess a single pin gauge.
6) Chapter 21 temperature test current to 1.25 times the rated current.
7) 23.7 plug connector having a separate front part of the package insert set of tensile test.
8) increased 23.8 pairs of the plug connector housing pressure test.
9) According to GB/T 5023-2008 "rated voltage 450/750V and below PVC insulated cables," the provisions of the cord type
As 60227IEC 53 of 3 × 0.75mm2, the maximum diameter of 8.0mm to 7.6mm; 3 × 1.0mm2, the maximum diameter
The 8.4mm to 8.0mm; 3 × 1.5mm2, by the maximum diameter of 9.8mm to 9.4mm.
10) according to GB/T 5013-2008 "rated voltage 450/750V and below rubber insulated cables," the provisions of the cord of type
60245IEC 53 of 3 × 0.75mm2, the maximum diameter of 8.8mm to 8.1mm; 3 × 1.0mm2, by the maximum diameter
9.2mm to 8.5mm; 3 × 1.5mm2, by the maximum diameter of 11.0mm to 10.4mm.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized.
This section drafted by. China Electric Apparatus Research Institute, Guangdong Huasheng Electric Industrial Co., Ltd., Dongguan City Wire and Cable Co., L
Division Shenzhen crown Asahi Electronics Co., Ltd., Shunde Kaihua Electric Industrial Co., Ltd., Zhejiang Yuehua Telecommunication Co., Ltd. Ningbo Economic and Technological Development
Zone Haixin Electric Technology Co., Ltd. Ningbo WARE Electric Co., Volex Cable Assembly (Shenzhen) Co., Ltd., China Household Electrical Appliances RESEARCH
Study hospital.
The main drafters of this section. Cai Jun, Xie pillar, Qiu Hong, Wu Hai, holy dynasty, Chen Jianxiong, Zheng Guoping, Feng Yonglin, Deng Hongling, Jiayu Lin,
Zhuju Tao.
This part of the standard replaces the previous editions are.
--- GB 17465.2-1998.
Introduction
GB 17465.1-2009 in each chapter, where the article appeared, "appliance couplers", "connector" or "appliance inlet" and other words were, these words,
Should be deleted, and were replaced by "Interconnection couplers", "plug connector" or "appliance outlet."
Household and similar appliances couplers
Part 2. Household and similar equipment interconnection couplers
1 Scope
GB 17465.1-2009 replaced by the following Chapter 1.
This section applies to household and similar appliances or equipment exchange poles interconnect coupled with ground contact or without ground contacts
Device, which was used for rated voltage not exceeding 250V, rated current not exceeding 16A, on a frequency of 50Hz or 60Hz AC power, the coupling
Clutch for power interconnection to the electrical appliance or equipment they mate with.
Note. the appliance or other equipment into an integral or attached appliance or other equipment in the appliance outlet within the scope of this section belongs. This section
Size and general requirements applicable to such appliance outlet, but some tests may not apply.
Of the plug connector requirements, based on the following assumptions, namely. insert sleeve corresponding appliance outlet temperature does not exceed 65 ℃
(Supercooling).
Comply with this part of the interconnection couplers suitable for use in the usually not more than 35 ℃, but occasionally reaches 40 ℃ 1) ambient temperature.
Meet the standard requirements of this loose-leaf interconnect coupler is used as the moisture required no special apparatus or equipment interconnection; if used
Other appliances or equipment interconnection, or as in normal use will be affected overflowing interconnection couplers appliance or equipment, there must be
Additional requirements.
NOTE. The following situations may require special structure.
--- In place special conditions, for example, ship, vehicle fine similar establishments;
--- In dangerous places, for example, where an explosion may occur.
2 Normative references
The following documents contain provisions which, through reference in this Part of GB 17465, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1182 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerancing
(GB/T 1182-2008, ISO 1101.2004, IDT)
GB 17465.1-2009 Appliance couplers for household and similar purposes - Part 1. General requirements (IEC 60320-1.2007,
MOD)
IEC /T R60083.1997 IEC member countries standardized plug socket for household and similar purposes 2)
IEC 60906 (all parts) IEC series for household and similar use plug and socket
1) in some areas of the subtropical climate, taking into account the most severe cases, the provision of interconnection couplers ambient temperature "usually not more than 35 ℃, but occasionally
It will reach 40 ℃ behind ".IEC 60320-2-2 which stipulated the ambient temperature is" usually not more than 25 ℃, but occasionally reach 35 ℃ ".
Empathy.
2) the type of plug dimensions shall comply with GB 1002 and GB 1003.
3 Terms and Definitions
GB 17465.1-2009 Chapter 3 as follows after the changes apply.
Line 3 should read.
"Annex" the term refers to the general term includes a plug connector and/or appliances, including outlet.
Increasing the definition.
3.101
It can optionally be connected to the appliance or equipment with another appliance or equipment connected to cable or cord or to both disconnected coupler.
Interconnection couplers consists of two parts.
--- Plug connector, the flexible cable or cord with integral or fixed to a flexible cable or cord portions;
--- Appliance outlet, and an appliance or equipment that is integral or attached inside the appliance or equipment, or fixed to the appliance or equipment,
And so part of the appliance or equipment to obtain power.
Note. The appliance or equipment into an integrated appliance outlet (the shroud and bottom of) the housing is composed of one appliance or equipment. Mounted appliance or equipment in the
Appliance outlet is an appliance installed in a separate appliance or equipment or fixed to the appliance or equipment outlet.
4 General requirements
Chapter 4 GB 17465.1-2009 make changes after the following apply.
Interconnection couplers shall ensure that the design and construction of safety and reliability in normal use, the user and the surrounding environment is not dangerous.
Compliance is checked by carrying out all the provisions of the relevant test to test.
General Description 5 tests
Chapter 5 GB 17465.1-2009 make changes after the following apply.
5.4 with the following. Unless otherwise specified, the plug connector and the appliance outlet and comply with this part of the corresponding appliance outlet
Or tested with the plug connector.
5.5 to read.
For appliance outlet, requiring six samples, of which three were used in addition to Chapter 14, Chapter 15, Chapter 16, Chapter 19, Chapter 20
Test and test outside the Chapter 21 provisions; the remaining three were for Chapter 14, Chapter 15, Chapter 16, Chapter 19, Chapter 20
And Chapter 21 of the test (including 16.2 retest).
For plug connectors requires nine samples, three of which were used to Chapter 14, Chapter 15, Chapter 17, 22.4 and 24.2 of the regulations except
Given test outside the test; the other three used for Chapter 14, Test Chapters 15 and 17 of Chapter 3 used for the last 22.4
test.
Rubber plug connector or similar material, requires two additional samples to test 24.2.1.
Polyvinyl chloride (PVC) or similar material of the plug connector, requires two additional samples to test 24.2.3.
Thus, the total number of sample plug connectors as follows.
Number of material samples manufactured plug connector
Rigid insulation material
PVC, rubber or similar material
6 Standard ratings
GB 17465.1-2009 Chapter 6 as follows after the changes apply.
6.2 to read.
Standard rated current section 9.1 of the present regulations, is 2.5A, 10A and 16A.
Category 7
GB 17465.1-2009 Chapter 7 after following applies for changes.
7.1 to read.
Interconnection couplers according to the type of connected device or appliance category.
--- Class Ⅰ equipment interconnection couplers;
Interconnection couplers --- Ⅱ type of equipment used.
7.2 to read.
Plug connector also by cable or cord connection method classification.
--- Rewirable plug connector;
--- Non-rewirable plug connectors.
8 flag
GB 17465.1-2009 Chapter 8 as follows after the changes apply.
8.1 to read.
Plug connector shall be marked.
--- Rated current (A);
--- Rated voltage (V);
--- Symbol for nature of supply;
--- Manufacturer or responsible vendor's name, trade mark or identification mark;
---model.
Note. The model may be a catalog number.
8.2 to read.
Not with the appliance or equipment into an integrated appliance outlet shall be marked with.
--- Manufacturer or responsible vendor's name, trademark or identification mark, and
--- Model offered after the appliance outlet properly installed or when mated with a plug connector should be invisible.
Note. The model may be a catalog number.
8.3 to read.
Ⅱ type of equipment used in the plug connector and the appliance outlet shall not be marked with the symbol Ⅱ class structure.
8.5 to read.
8.1 mark prescribed in the plug connector has been connected lines available, should be clearly legible.
Note. The "ready to use" the term does not refer to the plug connector is plugged into the output socket on the appliance.
8.6 to read.
Irreversible insertion of the plug connector contacts should be by observing the position of the plug connector mating face is determined, the position of the contacts arranged as follows.
Ground contact. the middle of the top;
Phase contact line. bottom left;
Neutral contact. lower right.
Irreversible insertion of the plug connector terminals can approach shall be as follows stitches, he said.
Earthing terminal. the symbol or representation;
Neutral terminal. by the letter N.
Non-rewirable irreversible insertion of the plug connector contacts do not need to have a sign, but the core must be connected according to the provisions of 22.1.
And comply with the requirements of this plug connector for use with, not as a whole or is not installed in the appliance or device in the appliance or device
The appliance outlet, there must be corresponding to the section of the terminal markings.
Symbol or letter signs shall mark the screw, washer, or other removable parts detachable.
NOTE. The reason the requirements terminal markings and connected wires, is to make it with appliance couplers corresponding requirements consistent. Appliance couplers for requests,
Taking into account the requirements of the polarity of the power supply system and the use of IEC plug and socket system (see IEC Publication 906).
9 Dimensions and interchangeability
GB 17465.1-2009 Chapter 9, the following changes made after apply.
9.1 to read.
Interconnection couplers shall comply with the following requirements relating to the standard sheets, except as permitted by 9.6.
Class Ⅰ equipment used 2.5A250V Interconnection couplers.
--- A plug connector Fig.
--- Appliance outlet Figure B
Ⅱ type of equipment used 2.5A250V Interconnection couplers.
--- Plug connector Figure C
--- Appliance outlet Figure D
Class Ⅰ equipment used 10A250V Interconnection couplers.
--- Plug connector Figure E
--- Figure F appliance outlet
Ⅱ type of equipment used 10A250V Interconnection couplers.
--- Plug connector Figure G
--- Appliance outlet Figure H
Class Ⅰ equipment used 16A250V Interconnection couplers.
--- Plug connector Figure I
--- Appliance outlet Figure J
Ⅱ type of equipment used 16A250V Interconnection couplers.
--- Plug connector Figure K
--- Appliance outlet Figure L
Compliance is at 25 ℃ ± 5 ℃ ambient temperature by measuring and/or checking gauges.
The amount of electrical accessories with the following table regulation test.
Test gauge electrical accessories
Figure E and G of FIG. 10A plug connector 9H
Figure I and K of FIG. 16A plug connector 9M
FIG. 10A appliance outlet F 101
10A appliance outlet Figure H 102
FIG. 16A appliance outlet J 103
Figure L of FIG. 16A appliance outlet 104
9.2 to read.
For holding the plug connector in the appliance outlet in the device, if any, shall comply with the relevant standard sheets (loose-leaf under consideration) of
Claim.
9.3 to read.
Between the plug connector and the appliance outlet pole connection it should be impossible.
Appliance outlet should not be in line with the IEC /T R60083. plug incorrectly connected 1997 requirements.
Plug connector can not be the same as a line with IEC /T R60083.1997 requirements for mobile socket incorrectly connected, and should not be
GB 17465.1-2009 meet the requirements of the connector incorrectly connected.
Compliance is checked by manual test checks.
Note 1. The "wrong connections" include single-pole connections and other connections do not meet the requirements of protection against electric shock.
Note 2. If the standard requirements of the leaflet, which guarantee compliance with these requirements.
9.4 to read.
Plug connector --- Ⅰ type of equipment should not be output with the appliance Class Ⅱ equipment receptacle mating;
--- Plug connector should not be smaller than the rated current of the appliance outlet plug connector mating.
Compliance is checked by inspection, by manual test and by at 35 ℃ ± 2 ℃ ambient temperature gauges to check.
Note 1. if they can meet the standard requirements of the leaflet, which guarantee compliance with these requirements, except gauges to verify those requirements.
Note 2. The gauge used is under consideration.
9.5 Not applicable.
10 Protection against electric shock
GB 17465.1-2009 for Chapter 10 after the following changes apply.
10.1 to read.
Interconnection couplers designed, should be able to do. When the plug connector is inserted partially or completely timely, live parts are not accessible.
Appliance outlet in the design should be able to do. when the appliance outlet after normal use properly installed, live parts
It is not easily accessible.
Compliance is checked by inspection and, if necessary, also by testing inspection standard test finger shown in Figure 10 carried.
The test finger touches every possible direction different parts, electrical indicator to show contact with the relevant part of the case, on with rubber
Or thermoplastic material shell cover, plug connectors and appliance outlet housing or body, to be a force to 20N standard test finger touch insulating material
Materials such as deformation influence all points of the plug connector will secure on; this test at 35 ℃ ± 2 ℃ ambient temperature.
Note 1. The standard test finger must be designed to have only part of each connection in the same direction along the axis of rotation of the test finger angle of 90 °.
Note 2. In the electrical voltage indicator 2s 40V ~ 50V between exposure and to display the related components.
Note 3. Just plug connector is inserted into the appliance outlet when inaccessibility of contact members is concerned, it can meet the standard requirements of the leaflet, which can ensure compliance with the
Of a request.
10.2 to read.
Just plug any live parts are accessible, the plug connector between the plug and the outlet of the appliance should be impossible to insert sets
Connect.
Compliance is determined by manual test and inspection test 10.1.
NOTE. The standard requires the leaflet that is able to ensure compliance with the above requirements.
10.4 to read.
Plug connector and the external parts of the appliance outlet, in addition to assembly screws and the like outside, shall be of insulating material products.
Compliance is checked by inspection.
Note 1. In Chapter 15 of the dielectric tests to check the suitability of the insulating material.
Note 2. The paint or enamel is not considered for insulation 10.1 to 10.4.
11 earthing
GB 17465.1-2009 for Chapter 11 after the following changes apply.
11.2 to read.
Interconnection couplers with ground contacts in the structure should be able to do. when the plug connector is inserted into the ground first, then plug the connector carrier
Contact was charged.
When you pull the plug connector, current-carrying contacts should be disconnected before disconnecting the ground.
Interconnection couplers that do not meet the requirements of the standard sheets, if qualified, by observing the drawings (consider the impact of manufacturing tolerances), and through
Check the sample according to the drawings identified.
Note. if they can meet the standard requirements of the leaflet, which can ensure compliance with the above requirements.
12 Terminals and terminations
GB 17465.1-2009 Chapter 12 applies.
13 Structure
GB 17465.1-2009 for Chapter 13 after the following changes apply.
13.1 to read.
Interconnection couplers designed to be able to do. plug connector ground contacts with the appliance outlet carrying not intentionally inserted between sets
Dangerous outside contact.
Compliance is checked by inspection.
Note. if they can meet the standard requirements of the leaflet, which can ensure compliance with this requirement.
13.3 to read.
Plug connector plug and appliance outlet plug sleeve should be firmly fixed and can not rotate.
Compliance is checked by inspection and manual test.
Note. the clamp screw can play a role to prevent rotation of the contact.
13.4 to read.
Plug connector plug should be firmly fixed, and should have sufficient mechanical strength, they should be surrounded by the cage, and, without the aid workers
Tools can not remove.
Bolt fixed firmness through observation, in case of doubt, also through the following test.
The sample is heated to a temperature of 7.1 appropriate level given 1h, during and after the test and remove the test load has kept 5min
This temperature.
The plug connector firmly grip with, but it should hold without adversely affecting the plug connector body unduly squeezed or deformed, and grip
Holding...
|