HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 15269.3-2011 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 15269.3-2011: Cigars -- Part 3: Technical requirements for packing, making, storage and transport
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 15269.3-2011English229 Add to Cart 3 days [Need to translate] Cigars -- Part 3: Technical requirements for packing, making, storage and transport Valid GB 15269.3-2011

PDF similar to GB 15269.3-2011


Standard similar to GB 15269.3-2011

GB/T 22838.2   GB 5606.5   GB 5606.4   GB 15269   GB 15269.4   GB 15269.2   

Basic data

Standard ID GB 15269.3-2011 (GB15269.3-2011)
Description (Translated English) Cigars -- Part 3: Technical requirements for packing, making, storage and transport
Sector / Industry National Standard
Classification of Chinese Standard X87
Classification of International Standard 65.160
Word Count Estimation 10,116
Date of Issue 2011-06-16
Date of Implementation 2012-04-01
Older Standard (superseded by this standard) GB 15269-1994 ial
Quoted Standard GB/T 15269.1-2010; GB/T 16447; GB/T 22838.1; GB/T 22838.4; GB/T 22838.7; GB/T 22838.9
Regulation (derived from) Announcement of Newly Approved National Standards No. 9 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard applies to cigar wrapper rolled technical requirements, test methods, and cigar storage requirements. This standard applies to cigars.

GB 15269.3-2011: Cigars -- Part 3: Technical requirements for packing, making, storage and transport


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cigars.Part 3. Technical requirements for packing, making, storage and transport ICS 65.160 X87 National Standards of People's Republic of China Partly replace GB 15269-1994 Cigars - Part 3. Product packaging, Rolling and technical requirements for storage and transportation Issued on. 2011-06-16 2012-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

4.9,5.1.7,5.2.4,5.3 this section are mandatory, others are recommended. GB 15269 "cigar" is divided into four parts. --- Part 1. Product requirements and sampling techniques; --- Part 2. packaging and labeling; --- Part 3. Product packaging, storage and transportation and rolling technology requirements; --- Part 4. Sensory technical requirements. This is Part 3 GB 15269's. This portion instead of GB 15269-1994. This section compared with GB 15269-1994 relevant parts of the main changes are as follows. --- Increasing the cigar packaging, rolling, and the terms and definitions of the technical requirements for storage and transportation; --- Modify the cigar rolling technology requirements, packaging technical requirements and test methods; --- Increased Inspection classification cigar packaging, rolled; --- Increasing the cigar packaging, rolling inspection rules; --- In part the technical requirements of transportation increased 9.1.3. This part by the State Tobacco Monopoly Bureau. This part of the National Standardization Technical Committee on Tobacco (SAC/TC144) centralized. This section drafted by. China National Tobacco Quality Supervision and Inspection Center, the Tobacco Shandong Industrial Co., Ltd., Sichuan and Chongqing tobacco industry limited liability Any company, the State Tobacco Monopoly Bureau of Economic Operation Division, China Tobacco Standardization Research Center, Hubei tobacco industry limited liability company, Anhui Tobacco Industry limited liability company. The main drafters of this section. Zhou Decheng, with Zhang, who on behalf of the Long Sun Shu Jun, Li Dong, Zhou Bin, Xia Yongfeng, Huangruo Jiang, Wang Hui. This part of the standard replaces the previous editions are. --- GB 15269-1994. Cigars - Part 3. Product packaging, Rolling and technical requirements for storage and transportation

1 Scope

GB 15269 of the provisions of this part of the cigar packaging, technical requirements of rolling, test methods, and cigar storage and transportation requirements. This section applies to cigars.

2 Normative references

The following documents contain provisions which, through reference in this Part of GB 15269, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 15269.1-2010 cigar - Part 1. Categories and technical requirements for sampling GB/T 16447 Tobacco and tobacco products for conditioning and testing atmospheres (GB/T 16447-2004, ISO 3402.1999, IDT) 22838.1 cigarettes and filter rods - Determination of physical properties GB/T Part 1. cigarette packaging and labeling 22838.4 cigarettes and filter rods - Determination of physical properties GB/T Part 4. quality of cigarettes GB/T 22838.7 Determination of physical characteristics for cigarettes and filter rods - Part 7. Cigarettes dust rate Part of GB /measuring physical properties of cigarettes and filter T 22838.9 9. Cigarettes short

3 Terms and Definitions

The following terms and definitions apply to this part of GB 15269. 3.1 Holes hole The cigarette wrapper in diameter than the hole of 2mm. 3.2 Peeling off-wrapper Cigarette wrapper flaking or disengaged. 3.3 Broken splitting Cigarette wrapper rupture longer than 5mm. 3.4 Bamboo cigarettes bamboojointcigar Empty vertical section of loose cigarettes because eggplant core density appears uneven.

4 rolling the technical requirements

4.1 short Cigar short technical requirements shown in Table 1. Table 1 cigar short technical requirements Model air trap section ratio of empty trap depth/mm large Medium small miniature < 2/3 < 1.0 < 1.5 4.2 Cigarette appearance Cigar cigarette appearance technical requirements shown in Table 2. Table 2 cigar cigarette appearance technical requirements project model Large medium small, micro Cigarette shape The central axis The maximum offset Cigarette length ≥100mm Cigarette length < 100mm Bevel cut height difference Cigarette nozzle head with a mouth ring ≤2.5mm ≤1.5mm ≤2.0mm ≤1.0mm ≤1.0mm ≤0.5mm Correct securely attached, not leak Of collusion solid paste, and complete flush, ride up and down the mouth of not more than 1mm. Print quality The amount should be legible Wrapper Finish Veining meticulous Shu stretch No creases < 1/3 < cigarette length 1/2 of the length of cigarettes Lesion Diameter not greater than 2.0mm, and should not exceed the number of points 2.00 Should not be greater than the diameter 3.0mm, and the points should not be More than two Dian Blot diameter not greater than 3.0mm, and the number of points should not exceed 2.00 Wrapper Completion Yan seam closing slot length ≤5mm, no significant endoderm No holes Peeling, no broken 4.3 tightness Cigar cigarette tightness technical requirements shown in Table 3. Table 3 cigar cigarette tightness technical requirements Model tightness Each model cigarettes full uniform, there should not be too loose, too tight, bamboo cigarettes 4.4 Cigarette length Cigar cigarette length technical requirements shown in Table 4. Table 4 technical requirements cigar cigarette length in millimeters Model Length Tolerance No mouth with a mouth Each model Design value (the factory inspection and type of inspection; see value Found averages; GB/T 15269.1-2010 4.9) (Inspection time) ± 1.5 ± 2.0 4.5 perimeter Cigar perimeter technical requirements shown in Table 5. Table 5 cigar perimeter technical requirements in millimeters Model Zhou Changyun difference Large, medium small When the design value (factory inspection and type test; number Values see GB/T 15269.1-2010 4.9); Found the average (time supervision and inspection) ± 1.5 ± 1.0 4.6 moisture content Cigar moisture content of the technical requirements shown in Table 6. Table 6 cigar moisture content of the technical requirements in% Model moisture Various models of 11.0 to 16.0 4.7 Quality Cigar quality and technical requirements in Table 7. Table 7 cigar quality and technical requirements of each unit of g Model Quality Tolerance large Medium small miniature When the design value (factory inspection and type test; number Values see GB/T 15269.1-2010 4.9); Found the average (time supervision and inspection) ± 1.0 ± 0.5 ± 0.3 ± 0.2 4.8 dust content Cigar dust content technical requirements in Table 8. Table 8 technical requirements cigar dust content in% Model dust content Queen ≤2.0 No. ≤2.0 Trumpet, miniature ≤3.0 4.9 Flammability Various types of cigars cigarettes, smoldering free time should not be less than 60s.

5 packaging technology requirements

General technical requirements 5.1 cartridge 5.1.1 Outsourcing cellophane box should close firmly with a full pull good, should not pull out. 5.1.2 cartridge surface should be clean and, if A stain length should not be greater than 3mm, and should not exceed 2.00. 5.1.3 correct box shape, the upper and lower side width difference of no more than 3mm; the upper and lower side should be a concave angle; angle stack damage to 3mm in length Within no more than two. 5.1.4 cartridge solid paste, paste, missing no more than 3mm. 5.1.5 should not be exposed Heyan branch, label paper should not be more than one. 5.1.6 cigarette box, wrapper basically the same color. If cigarette box packaging, the packaging should be complete well. 5.1.7 There should flip the box, the wrong equipment, cigarette holder detach, insect or insects, there should be a short break and maiming cigarettes should not be lack of support and multi-branching. General technical requirements of 5.2 5.2.1 Outsourcing transparent paper should be close to the firm, with a full pull good, should not pull out. 5.2.2 mounting surface should be clean, if A stain length should not be greater than 3mm, and should not exceed 2.00. 5.2.3 should seal affixed securely installed, the package strip, strip box packaging small box should not be exposed. Labeling Alice open length should not exceed one-third of its length One should not be exposed strip kits should not be more than one. 5.2.4 package, the barrel should not be installed wrong, less loaded. Article 5.3 smoke inside neatly, not the wrong equipment, less loaded. 5.4, between the boxes, bar, box or between each, not sticking. 5.5 Single package with reference to general technical requirements 5.1.

6 Test methods

6.1 according to GB/T 15269.1 extraction laboratory samples. 6.2 Preparation of samples from the laboratory sample. Under conditions other moisture, appearance, turn off outside, before the test specimens shall be in GB/T 16447 stipulated Adjustment and testing. 6.3 Appearance. For box packaging, from the press GB/T 6.1.3.1 15269.1-2010 Preparation of samples randomly selected 10 as the test Materials, such as the number of samples is 20, is also a specimen sample; support for the package, use 6.1.3.1 prepared as GB/T 15269.1-2010 of Sample. In visual method and vernier caliper test appearance, in which the central axis of the maximum offset and cut test schematic slant height difference Shown in Figure 1 and Figure 2. Results related to the magnitude of the length in millimeters (mm), with a precision to 0.1mm. Figure 1 the central axis of the maximum offset test schematic

2 bevel cut height difference test schematic diagram

6.4 short 6.3 Use the test sample as a sample, the bears were cigarette test according to the provisions of GB/T 22838.9 of. Results in millimeters (mm) He said accurate to 0.5mm. 6.5 tightness From the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of the 10 randomly selected as a sample, the use of sensory evaluation, hand Touch visual approach by supporting test. 6.6 Cigarette length From the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of the 10 randomly selected as a sample, by using a vernier caliper support experimenting. Results in millimeters (mm), with a precision to 0.5mm. 6.7 perimeter From the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of the 10 randomly selected as a sample, according to the length of the cigarette axis Cut direction, so that after spreading its widest point, whichever is measured with a vernier caliper test. Results in millimeters (mm), with a precision to 0.1mm. 6.8 moisture content 6.8.1 according to GB/T 15269.1-2010 the sample preparation 6.1.3.2, 6.8.2 ~ 6.8.6 according to the method of testing. 6.8.2 using the analytical balance, said cigar tobacco quality. 6.8.3 using the electric oven drying tobacco moisture. 6.8.4 with a diameter of 64mm, height 40mm aluminum sample box containing tobacco. 6.8.5 The cigarette peel the wrapper, tobacco and eggplant set uniformly mixed into two, two samples were placed in boxes, each weighing 5g ~ 10g, After in electric oven (100 ± 2) ℃ baked 2h, out into dry dish. Cool before weighing, according to the equation (1) Calculation of tobacco Moisture content. w = m1-m2m1 × 100% (1) Where. w --- tobacco moisture content,%, accuracy of 0.1%; M1 --- former tobacco drying mass in grams (g), accurate to 0.001g; After m2 --- drying tobacco mass in grams (g), to the nearest 0.001g. 6.8.6 Two parallel test result is the average moisture content of the batch of cigars. If the absolute value of the difference between the two results is greater than 0.3% Sampling should be re-tested. 6.9 Quality From the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of the 10 randomly selected as a sample, according to GB/T 22838.4 Supported by the provisions of the test. Results in grams (g) indicates, to the nearest 0.1g. 6.10 dust content 6.10.1 from the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of randomly selected 5 ~ 20 as a sample, in accordance with 6.10.2 and 6.10.3 of the test method. 6.10.2 Use GB/T 22838.7 specified in cigarettes containing end meter to detect and balance cigars dust content. 6.10.3 eggplant peel core cigarette after weighing uniformly mixed, weighed 15g, carefully flat on the analyzer screen mesh to be shaken 25s, after 80 times, the last with a brush carefully sieved out of the smoke swept under weigh, according to the equation (2) calculate the dust content. Y = m3m4 × 100% (2) Where. Y --- cigarette dust content,%, accuracy of 0.1%; M3 --- end tobacco mass in grams (g), accurate to 0.001g; m4 --- ethmoid eggplant core mass, in grams (g), to the nearest 0.001g. 6.11 Flammability 6.11.1 from the sample according to GB/T 15269.1-2010 6.1.3.3 Preparation of five randomly selected as a sample, according to 6.11.2 ~ 6.11.3 The method tested by branch. 6.11.2 According cigarette style marked the end of the cigarette to ignite a uniform length of 10mm. 6.11.3 evenly lit cigarette burning cigarette dangling flat on the shelf, let freedom smoldering and smoldering freedom starts counting the time. Results Sec (s), with a precision to 1s. 6.12 Packaging 6.12.1 decimation GB/T 15269.1-2010 5.2 box and strip directly as a sample; from the press GB/T 15269.1-2010 of 6.1.3.1 Preparation of samples randomly selected five boxes (branch) as a sample, such as the number of boxes for packaging the sample is less than or equal to 5 boxes, the sample also Sample. 6.12.2 according to GB/T 22838.1 test. Single package with steel ruler and visual inspection of the samples tested.

7 Inspection classification

Cigar inspection is divided into type inspection, factory inspection and supervision and inspection. Type examination shall include all items; project supervision and inspection according to there Off tobacco quality supervision and inspection agencies require settings to deal with class A general index entry inspection; factory inspection in accordance with corporate quality control requirements To determine their own test content, but in order to ensure product quality, at least to deal with all categories of indicators A test items. This section 4.1 to 4.9, 4.9 to A class indicators, 4.1,4.6 and 4.8 are class B, the other is a class C. 5.1 ~ 5.4, 5.1.7,5.2.4,5.3 is a Class A, the other is a class C. A same package simultaneously, while Class C index, press A class index points.

8 Inspection Rules

8.1 in accordance with the requirements of Part 4, Chapter 5, Chapter 6 determines the quality of various types of the test results of the number of defects. 8.2 Each B, Class C key indicators of various types of quality defects multiplied by the sum of the respective units of points equal to the value of the project defect deduction scores. cigar Packaging and rolling mass B, Class C items of performance indicators using percentile indicates that a score of 100 minus the sum of the scores of quality defects buckle, Score of negative timeshare 0 meter. 8.3 Packaging and cigar rolling mass of Class B and Class C Units index points are given in Table 9. Table 9 cigar B, Class C Units index points value packaging and rolling mass project name package Single barrel box Exterior/ Short / Tightness/ Cigarette length/ perimeter/ Moisture / quality/ Dust content / Unit value points 1111151111015 8.4 type of inspection, factory inspection, any indicators do not meet a Class A, or packed with coiled mass of B, C index Gotta Score of less than 60 points, then this batch cigar failed.

9 Storage Technical Requirements

9.1 Storage 9.1.1 cigar storage warehouses must be dry, clean, odor-free, the library should have good ventilation and fire-fighting facilities. 9.1.2 library storage tank should be smoke from the ground 200mm, away from the wall 300mm. Smoke box stack height does not exceed 5m; other rigid cartons Stacking height in pressure does not exceed the lowest cartons bearing strength prevail. Should stay out of the gap between the ventilation stack, the library should be set aside appropriate aisle. 9.1.3 library cigar FIFO must periodically in accordance with the requirements of 6.8 to detect cigar moisture content. 9.1.4 Any model specifications cigar, there should be not less than 7d stock Aging time before sales. 9.2 Transport 9.2.1 cigar and allowed to smell, perishable, highly toxic, put wet goods transported together. 9.2.2 Transport cigar tools must be dry, clean, odor-free, transit should be rain, moisture, anti-pressure, anti-violent vibration. 9.2.3 Handling cigar should be gently, not tear smoke box. You must have protective measures when loading tied me.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 15269.3-2011_English be delivered?

Answer: Upon your order, we will start to translate GB 15269.3-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 15269.3-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB 15269.3-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.