HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 10546-2013 English PDF

US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10546-2013: Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2.5 MPa -- Specification
Status: Valid

GB/T 10546: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 10546-2013English254 Add to Cart 3 days [Need to translate] Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2.5 MPa -- Specification Valid GB/T 10546-2013
GB/T 10546-2003English319 Add to Cart 3 days [Need to translate] Rubber hoses hose assemblies for liquefied petroleum gas (LPG) -- Bulk transfer application Obsolete GB/T 10546-2003
GB 10546-1989English239 Add to Cart 2 days [Need to translate] Liquid petroleum gas rubber hose Obsolete GB 10546-1989

PDF similar to GB/T 10546-2013


Standard similar to GB/T 10546-2013

GB/T 12585   GB/T 10822   GB/T 9573   GB/T 10541   GB/T 10544   GB 10543   

Basic data

Standard ID GB/T 10546-2013 (GB/T10546-2013)
Description (Translated English) Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2.5 MPa -- Specification
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G42
Classification of International Standard 75.200; 83.140.40
Word Count Estimation 13,170
Older Standard (superseded by this standard) GB/T 10546-2003
Quoted Standard GB/T 3512-2001; GB/T 5564-2006; GB/T 9573-2013; GB/T 9867-2008; GB/T 24134-2009; ISO 37; ISO 48; ISO 1402; ISO 1746; ISO 1817; ISO 7233; ISO 8031; ISO 8033; ISO 8330
Adopted Standard ISO 2928-2003, IDT
Regulation (derived from) National Standards Bulletin 2013 No. 10
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies: for transporting liquid or liquefied petroleum gas (LPG) and natural gas, and is set to open for the vacuum between the maximum working pressure range from 2. 5 MPa, temperature range of -30��C ~ +70��C or cold soft tube (expressed

GB/T 10546-2013: Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2.5 MPa -- Specification


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liuqid or gaseous phase and natural gas up to 2.5 MPa. Specification ICS 75.200; 83.140.40 G42 National Standards of People's Republic of China Replacing GB/T 10546-2003 Transport of liquid or pressure at 2.5MPa and below Liquefied petroleum gas (LPG) and natural gas Rubber hoses and hose assemblies - Specification Rubberhosesandhoseassembliesforliquefiedpetroleumgas (LPG) inthe (ISO 2928.2003, IDT) Issued on. 2013-07-19 2013-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 10546-2003 "Liquefied petroleum gas (LPG) Rubber hoses and hose assemblies for conveying bulk", and GB/T 10546-2003 main technical changes compared as follows. --- Added "Terms and definitions" (see Chapter 3); --- Added "category" (see Chapter 4); --- Modify the "Materials and Structures" (see Chapter 5, Section 3 of the 2003 edition); --- Modify the "Size" (see Chapter 6, Section 4 of the 2003 edition); --- Revised "performance requirements" (see Chapter 7, 2003 edition of Chapter 5); --- Added "electrical properties" (see Chapter 8); --- Added "test frequency" (see Chapter 9); --- Modify the "flag" (see Chapter 11, 2003 edition of Chapter 7). This standard uses the translation method identical with ISO 2928.2003 "delivery liquid or gaseous fluid at 25bar (2.5MPa) and under pressure Petroleum gas (LPG) and natural gas rubber hose and hose assemblies - Specification. " Correspondence between the consistency of the standards of international documents and normative references of the following documents. GB/T 528-2009 vulcanized rubber or thermoplastic rubber tensile stress strain properties (ISO 37.2005, IDT) GB/T 1690-2010 vulcanized rubber or thermoplastic rubber of resistance to liquids - Test methods (ISO 1817.2005, MOD) GB/T 5563-2006 Rubber and plastic hoses and hose assemblies - Hydrostatic testing (ISO 1402.1994, IDT) GB/T 5565-2006 rubber or plastic hose reinforced and non-reinforced hose bending test (ISO 1746.1998, IDT) GB/T 5567-2006 Rubber and plastic hoses and hose assemblies - Determination of suction resistance flat performance (ISO 7233.1991, IDT) GB/T 7528-2011 Rubber and plastic hoses and hose assemblies terminology (ISO 8330.2007, IDT) GB/T 9572-2001 Rubber and plastic hoses and hose assemblies - Determination of electrical resistance (ISO 8031.1993, IDT) GB/T 14905-2009 Rubber and plastics hoses - Determination of adhesion between layers (ISO 8033.2006, IDT) This standard made the following editorial changes. --- Remove the international standards in the name of "25bar", the standard name was changed to "delivery at 2.5MPa and below the liquid or gas pressure State liquefied petroleum gas (LPG) and natural gas rubber hose and hose assemblies - Specification "; --- Remove the body "bar" unit, said retaining only "MPa" units; --- Chapter 2 references ISO 7326.1991 to ISO 7326.2006 reference date; --- Due to ISO 4671.1999 has been revised to ISO 4671.2007, the standard reference in the country is equivalent to using the GB/T 9573-2013. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products hose Standardization Technical Committee Technical Committee (SAC/TC35/SC1) centralized. This standard was drafted. lush Far East Rubber Co., Ltd., Ningbo, Shenyang Rubber Research and Design Institute. The main drafters of this standard. Peng Chengjiang, Caoyou Hua, Wang Shuli, WANG Shu. This standard replaces the standards previously issued as follows. --- GB/T 10546-1989, GB/T 10546-2003. Transport of liquid or pressure at 2.5MPa and below Liquefied petroleum gas (LPG) and natural gas Rubber hoses and hose assemblies - Specification Warning. Use of this standard should be familiar with normal laboratory procedures. This standard is not intended to involve any security associated with their use Wide issues. Develop appropriate safety and health system and to ensure compliance with the terms of national regulations is the responsibility of the user.

1 Scope

The standard provides for delivery of liquid or liquefied petroleum gas (LPG) and natural gas, and is designed for working pressure between the vacuum Between the maximum 2.5MPa and a temperature range of -30 ℃ ~ 70 ℃ or cryogenic hose (expressed as -LT) is -50 ℃ ~ 70 ℃ Rubber hoses and hose assemblies request.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3512-2001 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging tests (ISO 188.1998, eqv) GB/T 5564-2006 Rubber and plastic hoses low flexing test (ISO 4672.1997, IDT) GB/T 9573-2013 Rubber and plastics hose and hose assemblies size measurement method (ISO 4671.2007, IDT) GB/T 9867-2008 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance (abrasion rotating cylindrical drum machine method) (ISO 4649.2002, IDT) GB/T 24134-2009 Evaluation of ozone resistance properties of rubber and plastic hoses under static conditions (ISO 7326.2006, IDT) ISO 37 Rubber, vulcanized or thermoplastic rubber tensile stress - strain properties (Rubber, vulcanizedorthermoplas- tic-Determinationoftensilestress-strainproperties) ISO 48 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness 10IRHD ~ 100IRHD) [Rubber, vulcanizedor thermoplastic-Determinationofhardness (hardnessbetween10IRHDand100IRHD)] ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (Rubberandplasticshosesandhoseas- semblies-Hydrostatictesting) ISO 1746 Rubber or plastics hoses and tubing - Bending tests (Rubberorplasticshosesandtubing-Bending tests) ISO 1817 Determination of vulcanized rubber liquid influence (Rubber, vulcanized-Determinationoftheeffectofliq- uids) Determination of ISO 7233 Rubber and plastics hoses and hose assemblies negative pressure resistance performance (Rubberandplasticshoseassem- blies-Determinationofsuctionresistance) ISO 8031 \u200b\u200bRubber and plastics hoses and hose assemblies - Determination of electrical conductivity and resistance (Rubberandplasticshosesand hoseassemblies-Determinationofelectricalresistance) Determination of ISO 8033 Rubber and plastics hoses adhesion strength between layers (Rubberandplasticshose-Determination ofadhesionbetweencomponents)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10546-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10546-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10546-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10546-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10546-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10546-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.