| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA 630-2006 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Hatchet for firefighters
| Obsolete |
GA 630-2006
|
PDF similar to GA 630-2006
Standard similar to GA 630-2006 GB 4351 GA 602 GB 4066.2 GA 999 Basic data | Standard ID | GA 630-2006 (GA630-2006) | | Description (Translated English) | Hatchet for firefighters | | Sector / Industry | Public Security (Police) Industry Standard | | Classification of Chinese Standard | C84 | | Classification of International Standard | 13.220.10 | | Word Count Estimation | 6,696 | | Date of Issue | 2006-08-29 | | Date of Implementation | 2007-01-01 | | Quoted Standard | GB/T 230.1-2004; GB/T 528-1998; GB/T 531-1999; GB/T 1804-2000; GB/T 5305-1985; GB/T 6461-2002; GB/T 8389-2003; GB/T 10125-1997 | | Regulation (derived from) | Ministry of Public Security approved the release of seven public safety industry standards | | Issuing agency(ies) | Ministry of Public Security | | Summary | This standard specifies the specifications, design requirements, performance requirements, test methods, inspection rules, marking, packaging, transportation and storage of fire waist ax. This standard applies to firefighters to wear with, in the fire rescue when used to manually break the non-live obstruction fire waist ax. | GA 630-2006: Hatchet for firefighters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hatchet for firefighters
ICS 13.220.10
C84
People's Republic of China Public Safety Industry Standard
Fire waist axe
Released on.2006-08-29
2007-01-01 implementation
Ministry of Public Security
Foreword
Chapter 4 of this standard is mandatory and the rest are recommended.
This standard is based on the structural characteristics and technical performance of the domestic fire axe and the requirements of the use of firefighting forces in China.
The standard is referenced to relevant standards at home and abroad, and based on this, it is proposed through technical analysis.
This standard was proposed by the Fire Department of the Ministry of Public Security.
This standard is under the jurisdiction of the Fifth Technical Committee of the National Fire Protection Standardization Committee (SAC/TC113/SC5).
This standard was drafted. Shanghai Fire Research Institute of the Ministry of Public Security.
The main drafters of this standard. Yin Haibo, Ma Weiguang, Li Yuxi, Zhou Kai.
Fire waist axe
1 Scope
This standard specifies the specifications, design requirements, performance requirements, test methods, inspection rules, marking, packaging, transportation and storage of fire axe.
This standard is applicable to fire axe worn by firefighters and used to manually dismantle non-charged obstacles during firefighting and rescue.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 230.1-2004 Metallic Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T
Ruler) (ISO 6508-1.1999, MOD)
GB/T 528-1998 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber (eqv ISO 37.1994)
GB/T 531-1999 Rubber pocket hardness tester hardness test method (idt ISO 7619.1986)
GB/T 1804-2000 General tolerances Linear and angular tolerances without tolerances (eqv ISO 2768-1.1989)
GB/T 5305-1985 Hand tool packaging, marking, transportation and storage
GB/T 6461-2002 Rating of specimens and test pieces of metals and other inorganic coatings on metal substrates after corrosion test
(ISO 10289.1999, IDT)
General technical conditions for steel axe GB/T 8389-2003
GB/T 10125-1997 Artificial atmosphere corrosion test salt spray test (eqv ISO 9227.1990)
3 Product Specifications
3.1 type
The type of fire waist axe is shown in Figure 1.
1---point knife;
2---撬口;
3---flat blade;
4---axe handle sleeve;
5---handle;
6---Axe handle.
Figure 1 Schematic diagram of the fire waist axe
|