|
US$249.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GA 614-2006: Cut-resistant gloves for police
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA 614-2006 | English | 249 |
Add to Cart
|
3 days [Need to translate]
|
Cut-resistant gloves for police
| |
GA 614-2006
|
PDF similar to GA 614-2006
Basic data | Standard ID | GA 614-2006 (GA614-2006) | | Description (Translated English) | Cut-resistant gloves for police | | Sector / Industry | Public Security (Police) Industry Standard | | Classification of Chinese Standard | A94 | | Classification of International Standard | 13.340.99 | | Word Count Estimation | 7,762 | | Date of Issue | 2006-04-27 | | Date of Implementation | 2006-08-01 | | Issuing agency(ies) | Ministry of Public Security | | Summary | This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of police cut-resistant gloves. This standard applies to the production of police anti-cut gloves, inspection, acceptance and order. | GA 614-2006: Cut-resistant gloves for police---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cut-resistant gloves for police
ICS 13.340.99
A94
People's Republic of China Public Safety Industry Standard
Police cut-proof gloves
Released on.2006-04-27
Implementation of.2006-08-01
Ministry of Public Security
Foreword
The full technical content of this standard is mandatory.
Appendix A of this standard is a normative appendix.
This standard was proposed by the Equipment Finance Bureau of the Ministry of Public Security.
This standard is under the jurisdiction of the Specialized Police Equipment Standardization Technical Committee of the Ministry of Public Security.
This standard was drafted by Shenzhen Magic Shield Protective Products Co., Ltd., Special Police Equipment Quality Supervision and Inspection Center of the Ministry of Public Security, Beijing
Jun Antai Protection Technology Co., Ltd., Beijing Keyada New Technology Development Corporation, Beijing Zhongtianfeng Safety Protection Technology Co., Ltd.
Drafting.
The main drafters of this standard. Xu Xiong, Ren Changqing, Gao Changde, Zhuang Nianzeng, Yang Zhidong.
This standard is interpreted by the Specialized Police Equipment Standardization Technical Committee of the Ministry of Public Security.
Police cut-proof gloves
1 Scope
This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of police cut-proof gloves.
This standard applies to the production, inspection, acceptance and ordering of police cut-proof gloves.
2 Terms and definitions
The following terms and definitions apply to this standard.
2.1
A glove or glove type that is effective against a wide range of cutting and strokes.
2.2
When various tools attack the human body, it can effectively reduce various types of structures of the wrist, palm, fingers, back of the hand, and scratches.
Assembly.
3 requirements
3.1 General requirements
3.1.1 The wrists, palms, backs and fingers of the police anti-cutting gloves are all within the coverage of the cut-proof layer, and the materials should be consistent, and
Non-toxic.
3.1.2 Wearability. The police anti-cutting gloves should be easy to wear, take off, breathable, feel good, feel good, and do not affect joint bending.
3.1.3 Product identification. Each police anti-cutting glove should have a clear manufacturer name or trademark, specification, production number or production date.
3.2 Appearance requirements
The surface of the police anti-cutting gloves should be flat, with defects such as wireless head, breakage, notch, open wire, missing needle and stain.
3.3 Specifications
The size of the police cut-proof gloves consists of two sizes, the total length L and the palm width W (the width of the tiger's mouth at a distance of 20 mm from the finger), see
Figure 1. There are four types of models, namely S, M, L and XL, and the dimensions should meet the requirements of Table 1.
The unit is mm
Figure 1 Location map
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GA 614-2006_English be delivered?Answer: Upon your order, we will start to translate GA 614-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GA 614-2006_English with my colleagues?Answer: Yes. The purchased PDF of GA 614-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|