GA 141-2010 PDF English
US$395.00 · In stock · Download in 9 secondsGA 141-2010: Police ballistic resistance of body armor Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureGA 141: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GA 141-2010 | English | 395 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Police ballistic resistance of body armor
| |
| GA 141-2001 | English | 439 |
Add to Cart
|
3 days
|
General specification for police body armor
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GA 141-2010
GA 141-2010: Police ballistic resistance of body armor---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GA141-2010
GA
PUBLIC SECURITY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 13.340.10
A 94
Replacing GA 141-2001
Police ballistic resistance of body armor
ISSUED ON: OCTOBER 17, 2010
IMPLEMENTED ON: DECEMBER 01, 2010
Issued by: Ministry of Public Security of PRC
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Category and naming ... 9
5 Technical requirements ... 11
6 Test method ... 14
7 Inspection rules ... 17
8 Quality assurance provisions ... 19
9 Packaging, transportation, storage ... 20
Appendix A (Informative) Other special bullet types that require special attention ... 21
Appendix B (Normative) Ballistic performance test method for ballistic resistance of
body armor ... 22
Appendix C (Informative) Safety performance evaluation method of ballistic resistance
of body armor ... 27
Appendix D (Informative) Test method of ballistic limit V50 ... 29
Police ballistic resistance of body armor
1 Scope
This standard specifies the terms and definitions, classification and naming, technical
requirements, test methods, inspection rules, quality assurance rules, packaging,
transportation and storage of police ballistic resistance of body armor products
(hereinafter referred to as ballistic resistance of body armor).
This standard applies to police ballistic resistance of body armor.
2 Normative references
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document;
for the undated documents, only the latest version (including all the amendments) is
applicable to this standard.
GJB 3196-1998 Bullet test method
FZ/T 01004-2008 Coated fabrics - Determination of resistance to perforation by
water
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Police ballistic resistance of body armor
A garment, that absorbs and dissipates the energy of a warhead, prevents perforation,
mitigates blunt trauma, effectively protects the body's protected parts, including
ballistic resistance body armor vests, trunk armor panel, accessory of ballistic
resistance of body armor.
3.2
Armor panel
A general term for protective structures, that effectively prevent warheads from
penetrating and prevent or reduce blunt trauma to the human body, including
Figure 3 -- Schematic diagram of body armor structure
5.1.2 The ballistic resistance of body armor's material shall be non-toxic and have no
natural harm to the human body.
5.1.3 The ballistic resistance of body armor shall be flexible and easy to put on and take
off. After wearing, the free movement of the two arms and the movements of the human
body, such as kneeling, jumping, squatting, pitching, turning, shall not be restricted.
5.1.4 The jacket of the ballistic resistance of body armor is compatible with the
specifications of the armor panels AND shall be separable.
5.1.5 The armor panel of the trunk shall be marked with the strike face or wear face.
5.2 Appearance requirements
5.2.1 The jacket of the body armor shall be free from defects such as damage, floating
lines, missing stitches.
5.2.2 There are no holes, deep pits, scratches, cracks, corner burrs and other defects on
the surface of the ballistic panel material. Metal materials shall be subject to anti-rust
treatment. The non-metal materials shall be even and smooth.
5.2.3 The ballistic material of the same layer shall be uniform and consistent, without
defects such as splicing, local bulges, wrinkles.
5.2.4 For the ballistic panel composed of multiple layers of ballistic materials, the
specifications and dimensions of each layer shall be consistent. For the soft ballistic
materials, the raw materials shall not be chemically treated and thermally bonded.
5.2.5 The ballistic panel structure and material of accessory of ballistic resistance of
body armor shall be consistent with the trunk armor panels.
5.2.6 There shall be clear and permanent product marks on the body armor and the
ballistic insert plate. The position of the body armor sign shall be 10 cm below the
neckline on the inside of the back AND at the center of the strike face on the protective
cover of ballistic panel. The sign of ballistic insert plate shall be on the lower right
corner of the strike face.
The information on the body armor sign shall include:
a) Manufacturer's name or trademark;
b) Product name and code;
c) Product number;
d) Product specifications;
e) Implemented standard number;
f) Degree of protection;
g) Date of manufacture;
h) Production batches;
i) Validity period;
j) Instructions for use and precautions.
The information on the signs of ballistic insert plates and protective cover of ballistic
panel shall include:
a) Manufacturer's name or trademark;
b) Product name and code;
c) Implemented standard number;
d) Degree of protection;
e) Date of manufacture;
f) Production batches;
g) Validity period.
5.3 Color
The color of the ballistic resistance of body armor vest shall be police uniform blue.
5.4 Material properties of protective cover of ballistic panel
5.4.1 The protective cover of the ballistic panel is black, which shall be light-proof and
waterproof; the edge sealing shall be uniform.
5.4.2 The material of the protective cover of the ballistic panel shall have anti-seepage
performance. The hydrostatic pressure resistance shall be greater than or equal to 18
kPa.
5.5 Protected area
The actual projected protective area of the ballistic resistance of body armor shall be
greater than or equal to 0.25 m2, as shown in Figure 4a). For body armors, which have
a protection level above level 4, if a ballistic insert plate is used, it shall be placed
outside the ballistic panel; the effective ballistic size of the ballistic insert plate is 250
mm × 300 mm; the chamfering of the four corners is less than or equal to 25 mm, as
Record the test data. Determine whether the results meet the requirements of 5.6.
6.8 Environmental adaptability test
6.8.1 Put the ballistic resistance of body armor into the incubator at -20 °C ± 2 °C for 4
hours. Then carry out the shooting test. The ballistic performance test shall be
completed within 15 minutes. Record the test data. Judge whether the result meets the
requirements of 5.6.
6.8.2 Put the ballistic resistance of body armor into the incubator, at a temperature of
55 °C ± 2 °C for 4 hours. Then carry out the shooting test. It shall complete the ballistic
performance test, within 15 minutes. Record the test data. Judge whether the result
meets the requirements of 5.6.
6.8.3 Put the ballistic resistance of body armor into a damp heat chamber. Keep it for
240 h, at a temperature of 70 °C ± 2 °C and a relative humidity of 80%. Then place it
at room temperature for 24 h, before performing a ballistic performance test, to
determine whether the result meets the requirements of 5.6.
7 Inspection rules
7.1 Inspection classification
Product inspection is divided into type inspection and quality consistency inspection.
7.2 Type inspection
7.2.1 In case of any of the following situations, type inspection shall be carried out:
a) When the design or production of new product is type finalized;
b) When there are major changes in materials, structures, production processes;
c) When the product is produced for the first time OR when the production is
resumed after one year of suspension;
d) When the periodic inspection is required, after accumulating a certain amount of
production;
e) When the competent authority proposes type inspection requirements.
7.2.2 The test items, requirements, test methods of type inspection shall be carried out
according to the provisions in Table 3.
7.3 Quality consistency inspection
During the quality consistency inspection, first check the consistency of the structure
be carried out by referring to the safety performance evaluation method of the ballistic
resistance of body armor in Appendix C.
8.6 When selecting ballistic resistance of body armor, users of ballistic resistance of
body armor shall fully consider the quality and comfort of ballistic resistance of body
armor, under the conditions specified in this standard, so as to increase the wearing rate
of ballistic resistance of body armor.
9 Packaging, transportation, storage
9.1 Packaging
9.1.1 There shall be product name, manufacturer name, product code, implemented
standard number, product quantity, production date, batch number, packaging box size,
gross weight, signs such as "Avoid moisture", on the outer packaging box. The color of
the word is black; the font is bold; the font size is appropriate; the handwriting shall be
clear and neat.
9.1.2 The packaging box is made of double corrugated cardboard AND must be subject
to the moisture-proof treatment.
9.1.3 Each ballistic resistance of body armor product has a special packaging bag; there
must be a certificate of conformity, insurance policy, instruction manual, etc. in the bag.
9.2 Transportation
It shall be tightly covered during transportation; avoid exposure to rain, moisture,
exposure, or mixing with corrosive items during transportation.
9.3 Storage
The product shall be stored in a ventilated, dry, light-proof warehouse, which shall be
more than 250 mm above the ground. It shall not be stored together with corrosive items.
Appendix C
(Informative)
Safety performance evaluation method of ballistic resistance of body armor
C.1 Test of ballistic limit V50
Carry out the ballistic limit V50 test on the ballistic panel. The test method shall be in
accordance with the provisions in Appendix D.
C.2 Determination of the minimum perforation velocity Vmin
C.2.1 Based on the lowest value of the perforation velocity in the ballistic limit V50
test, taking the velocity drop of 10 m/s as an interval, to carry out the ballistic capability
of the ballistic panel. A total of 3 consecutive velocity drop intervals are tested; shoot 5
bullets at each velocity drop interval. The layout of the bullet strike points is the same
as that in Figure B.4 -- Schematic diagram of strike point positions for shooting test.
C.2.2 If there is no perforation in three consecutive velocity drop intervals, take this
benchmark as the minimum value of perforation velocity Vmin. If there is perforation in
a certain velocity drop interval, take this perforation velocity as a reference; take the
velocity drop of 10 m/s as an interval, to carry out the ballistic capacity test of a ballistic
panel again. Totally 3 velocity drop intervals are tested; shoot 6 bullets on each velocity
drop interval. The strike point layout is same as that in Figure B.4 -- Schematic diagram
of strike point positions for shooting test. If there is no perforation in consecutive 3
velocity drop intervals, take this benchmark value as the minimum perforation value
Vmin.
C.2.3 If the perforation occurs again, take the perforation velocity as the benchmark, to
repeat the test process, until the perforation no longer occurs in the 3 velocity drop
intervals. Take this benchmark as the minimum perforation velocity Vmin.
C.3 V0 calculation
C.3.1 According to the calculation formula Vmin = V50 - 3μ of minimum value of
perforation velocity Vmin, ballistic limit V50, standard deviation μ, it can be concluded
that:
C.3.2 According to the ballistic limit V50 and the standard deviation μ, the following
formula can be used to calculate the value of V0:
D.3.5 The shooting test of ballistic panels, which have different protection levels, shall
be carried out, according to the provisions in Table 2.
D.3.6 Adjustment of the test device: The velocity measuring point is 3 m away from the
muzzle, at a shooting distance of 5 m.
D.3.7 Test procedure of V50 bullet velocity
D.3.7.1 During the process, it shall not move the position of the test barrel. It can only
move the position of the overall backing material fixture. The angle of incidence shall
be kept at 0°.
D.3.7.2 When making the first shot, select the V50 projectile velocity, which is (20 ~
30) m/s higher than the corresponding ballistic level of the specimen to be tested, for
the first shot. Then check the backing material to determine whether the specimen is
penetrated.
D.3.7.3 In follow-up shooting, if the first shot penetrates, it shall reduce the amount of
ammunition fired for the second shot AND reduce the bullet speed by (15 ~ 30) m/s;
meanwhile change the shooting position, so that the second shot can form a stop. If the
first shot is stop, it shall increase the amount of ammunition fired AND increase the
bullet speed by (15 ~ 30) m/s, to make the second shot after movement, to form a
perforation.
D.3.7.4 Repeatedly adjust the shooting state, until the test piece has 5 shots (at least 3
shots) of penetrating bullet velocity and 5 shots (at least 3 shots) of stopping bullet
velocity. The difference between the lowest penetrating projectile velocity and the
highest blocking projectile velocity is less than 38 m/s.
The shot-to-shot distance is greater than 51 mm, the shot-to-edge distance is greater
than 75 mm, meanwhile the adjacent strike points are not in the same warp (weft)
direction.
If material shrinkage occurs during the test, the material can be smoothed, before
subsequent testing.
D.4 Calculation of V50 bullet velocity
D.4.1 Theoretical calculation
D.4.1.1 Calculation of mean
Where:
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GA 141-2010 be delivered?Answer: The full copy PDF of English version of GA 141-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GA 141-2010_English with my colleagues?Answer: Yes. The purchased PDF of GA 141-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GA 141-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GA 141-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GA 141-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GA 141-2010?A step-by-step guide to download PDF of GA 141-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GA 141-2010".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|