| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA 1035-2012 | English | 879 |
Add to Cart
|
5 days [Need to translate]
|
General requirements for factory inspection of fire products
| Obsolete |
GA 1035-2012
|
PDF similar to GA 1035-2012
Standard similar to GA 1035-2012 GB 4351 GA 602 GB 4066.2 GA 999 Basic data | Standard ID | GA 1035-2012 (GA1035-2012) | | Description (Translated English) | General requirements for factory inspection of fire products | | Sector / Industry | Public Security (Police) Industry Standard | | Classification of Chinese Standard | C84 | | Classification of International Standard | 13.220.99 | | Word Count Estimation | 21,292 | | Date of Issue | 2012-12-26 | | Date of Implementation | 2013-01-01 | | Quoted Standard | GB/T 19000; GB/T 27000; GA 846 | | Regulation (derived from) | Announcement on Publication of Public Safety Industry Standard; Industry Standard Record Announcement No. 3 of 2013 (No. 159) | | Issuing agency(ies) | Ministry of Public Security | | Summary | This standard specifies the terms, definitions, general rules and requirements for inspection of fire-fighting products. This standard applies to the fire products certification bodies for the implementation of fire products certification work carried out | GA 1035-2012: General requirements for factory inspection of fire products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for factory inspection of fire products
ICS 13.220.99
C84
People's Republic of China Public Security Industry Standards
Fire products factory inspection General requirements
2012-12-26 release
2013-01-01 implementation
People's Republic of China Ministry of Public Security
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 General 3
5 Requirements 4
Appendix A (normative) Factory Quality Assurance Ability 8
Appendix B (normative) Factory product consistency control requirements 11
Annex C (normative) product consistency verification requirements 13
Preparation of Annex D (normative) inspection program requirements 14
Appendix E (normative) site inspection meeting content 16
Foreword
Chapter 4 of this standard, Chapter 5 are mandatory, the rest are recommended.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard was proposed by the Ministry of Public Security Fire Department.
This standard by the National Standardization Technical Committee on Fire fire detection and alarm Technical Committee (SAC/TC113/SC6) centralized.
This standard is drafted by. Ministry of Public Security Fire Product Conformity Assessment Center.
This standard participated in the drafting unit. Ministry of Public Security in Tianjin Fire Research Institute, Ministry of Public Security Shanghai Fire Research Institute, Ministry of Public Security Shenyang Fire Research Institute, public
Abe Sichuan Fire Research Institute, Xi'an System Sensor Electronics Co., Ltd., Tianjin Shengda security technology limited liability company, Shenzhen Internet security technology
Ltd., Shenyang Fire electronic equipment factory, Qingdao Hill House Fire Equipment Factory, Foshan City, Guangxi Fire Industrial Co., Ltd., Shanghai Golden Shield Fire Safety
Safety Equipment Co., Ltd. Blue Shield Door Industry in Guangdong Limited.
Drafters of this standard. Dong Jing Fei, Zhang Lisheng, Qu Li, Yu Wei, Lu Xi, Zhang Decheng, Jinyi heavy Liuyu Heng, Wang learned, Zhangshao Yu,
Li Ning, Cheng Daobin, Shen Jian Min, Li Li Hong, Liu Xin Chuan, HU Qun Ming, Mr Lee, Hsu Chun-yuan, Zhang Yuan Xue, Liang Zhichang, Zhou Xiangyi, Lvzi Li, Liu Lin,
Yellow Legion.
This standard is the first release.
Introduction
This standard is based and the Ministry of Public Security, SAIC, AQSIQ "People's Republic of China Certification and Accreditation Regulations" issued a joint
"Fire Products Supervision and Management Regulations" and the relevant provisions, to meet the needs of fire protection products certified factory inspection work and developed.
This standard is promulgated, to improve fire protection products certified factory inspection quality, sure fire product certification fair, standardized and effective
To carry out, it has a very important role.
Fire products factory inspection General requirements
1 Scope
This standard specifies the terms and definitions fire products factory inspection, General and requirements.
This standard applies to fire product certification bodies for the implementation of fire protection product certification undertaken factory inspection activities, it can also be used as nuclear
Real fire products factory conditions and conformity assessment activities.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 19000 Quality management systems Fundamentals and vocabulary
GB/T 27000 Conformity assessment - Vocabulary and general principles
GA 846 fire product identity information management
3 Terms and Definitions
GB/T 19000 and GB/T 27000 define the following terms and definitions apply to this document.
3.1
Applicant applicant
Apply for product certification organization.
Note 1. In general, the applicant after obtaining certification to become holder.
Note 2. Application Agent. instead of applicants apply for certification application procedures of the organization.
3.2
Holder holderofcertificate
Holding tissue product certificates.
Note. In general, the holder in the certification application stage the applicant.
3.3
Manufacturer manufacturer
Control certified manufacturing organization.
Note. A manufacturer can have multiple factories.
3.4
Factory factory
Certified products for final assembly and/or testing and Enforcement mark the place.
Note. There are internal inspection of all places at least the final assembly, routine test, affixed to the product nameplate and logo and other processes.
3.5
OEM factory originalequipmentmanufacturer
By the principal to provide design, manufacturing process control and testing requirements for the production of certified products factory.
Note. The principal may be the applicant, the holder or the manufacturer.
|