FZ/T 95006: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 95006-2024 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Ordinary rolling mill)
| Valid |
FZ/T 95006-2024
|
| FZ/T 95006-2012 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Padder
| Valid |
FZ/T 95006-2012
|
| FZ/T 95006-1998 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Padder
| Obsolete |
FZ/T 95006-1998
|
| FZ/T 95006-1994 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Chinese Industry Standard)
| Obsolete |
FZ/T 95006-1994
|
Basic data | Standard ID | FZ/T 95006-2024 (FZ/T95006-2024) | | Description (Translated English) | (Ordinary rolling mill) | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W95 | | Classification of International Standard | 59.120.50 | | Date of Issue | 2024-10-24 | | Date of Implementation | 2026-11-01 | | Older Standard (superseded by this standard) | FZ/T 95006-2012 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the classification and parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage of ordinary padders. This standard applies to ordinary padders that use cotton, wool, chemical fiber and its blended fabrics as flat-width padders after washing or dipping processes to maintain a certain padding rate. | FZ/T 95006-2012: Padder---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Padder
ICS 59.120.50
W95
People's Republic of China textile industry standards
Replacing FZ/T 95006-1998
Ordinary rolling cart
Issued on. 2012-05-24
2012-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 95006-1998 "ordinary rolling car."
This standard FZ/T 95006-1998 compared to the main technical changes are as follows.
--- Increasing the classification (see 3.1);
--- Modify the parameters (see 32, 1998 edition of the Table 1);
--- Remove the roll over rate requirements conditions nominal speed (see the 1998 edition Table 2);
--- Increasing the whole machine noise requirements (see 4.8).
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile machinery and accessories spinning, dyeing and finishing machinery Technical Committee (SAC/TC215 /
SC1) centralized.
This standard was drafted. Jianye Jiangsu Machinery Manufacturing Co., the National Textile Machinery Quality Supervision and Inspection Center, Jiangsu large printing machine
Armed Ltd., Shaoyang Textile Machinery Co., Ltd., Wuxi two Rubber Co., Huangshi Jingwei Textile Machinery Company Limited.
The main drafters of this standard. Chen Jianrong, Li Liping, Chen Lijie, Wang Jiqing, Lin Jian, Zheng Jun, Zi Yi Ming.
This standard was first released in April 1994, in January 1998 the first amendment, this is the second revision.
Ordinary rolling cart
1 Scope
This standard specifies the general classification and the car rolling parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to cotton, wool, synthetic and blended fabrics after washing or dipping step as width mangle, to maintain a certain ratio of rolling over
Ordinary rolling cart.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 2894 Safety Signs and use guidelines
GB/T 7111.1 Textile machinery - Noise test code - Part 1. General requirements
GB/T 7111.7 Textile machinery - Noise test code - Part 7. Dyeing & Finishing Machinery
GB/T 17780 Textile machinery - Safety requirements
GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements
FZ/T 90001 Textile machinery Packaging
FZ/T 90074 textile machinery products Painting
FZ/T 90089.1 textile machinery nameplate types, sizes and technical requirements
FZ/T 90089.2 textile machinery nameplate content
FZ/T 92061 ordinary rolling cart with stainless steel roll
FZ/T 92062 ordinary cars rolling rubber rolls
3 Categories and Parameters
3.1 Classification
Classification by structure. vertical, horizontal, inclined.
3.2 Parameter
Parameters in Table 1.
Table 1
Project Parameters
Nominal width (B)
mm
(1100), 1200,1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600
Nominal speed
m/min
50,60,70,80,100,125,150,200
|